Re: connecting to serial port + python
In article [EMAIL PROTECTED], Japan Shah [EMAIL PROTECTED] wrote: Hello, I am trying to connect my Nokia 6610 using usb cable, I have installed usb-serial driver of it. I hv tested it with Hyperterminal and it works fine. but when I wrote a python script I am not able to receive the responce from the device. . . . It's quite likely that you do NOT want to regard this as a serial port device as commonly understood. It's even more likely that you're going to be very happy once you start reading about gammu URL: http://www.gammu.org/ , an open-source project (or collection of open-source pro- jects) focussed on mobile telephony handset devices, especially those from Nokia. Gammu works particularly well with the 6610 and closely- related handsets, in my experience; I've been using it so for a couple of years. What's your preferred (desktop) operating system? Which cable did you buy? Is it compatible with one made at the Nokia factories? Not all USB cables are alike ... -- http://mail.python.org/mailman/listinfo/python-list
Re: connecting to serial port + python
En Tue, 03 Jul 2007 10:01:51 -0300, Japan Shah [EMAIL PROTECTED] escribió: I am trying to connect my Nokia 6610 using usb cable, I have installed usb-serial driver of it. I hv tested it with Hyperterminal and it works fine. but when I wrote a python script I am not able to receive the responce from the device. lines = self.sock.read(100) If the response contains less than 100 bytes, the above line will block. command = ['AT','ATI','ATl1','AT+GMMM'] for cmd in command: conn1.write(str(cmd)) Don't you have to send ENTER after each command? \n th = connect_serial(conn1) list1.append(th) th.start() You can't have four threads all reading the same serial port. The device sends its responses sequentially anyway. -- Gabriel Genellina -- http://mail.python.org/mailman/listinfo/python-list
connecting to serial port + python
Hello, I am trying to connect my Nokia 6610 using usb cable, I have installed usb-serial driver of it. I hv tested it with Hyperterminal and it works fine. but when I wrote a python script I am not able to receive the responce from the device. import os import re import time import sys from threading import Thread import serial class connect_serial(Thread): def __init__(self,socks): Thread.__init__(self) self.sock = socks self.count = 0 def run(self): self.count = 0 try: while 1: self.count +=1 if (self.count=5): break lines = self.sock.read(100) if lines: print lines print 'read success---' else: print 'nothing to read',str(self.getName()) except Exception,e: print self.getName() print time.ctime() print try: conn1 = serial.Serial(4) conn1.baudrate = '9600' conn1.parity = serial.PARITY_EVEN conn1.timeout=1 except Exception,e: print 'port is Buzy' sys.exit(-1) print '--' print 'getSupportedBaudrates',conn1.getSupportedBaudrates() print 'getSupportedByteSizes',conn1.getSupportedByteSizes() print 'getSupportedParities',conn1.getSupportedParities() print 'getSupportedStopbits',conn1.getSupportedStopbits() print '--' print 'getBaudrates',conn1.getBaudrate() print 'getByteSizes',conn1.getByteSize() print 'getParities',conn1.getParity() print 'getStopbits',conn1.getStopbits() print '--' print 'port is in use',conn1.portstr list1 = [] command = ['AT','ATI','ATl1','AT+GMMM'] for cmd in command: conn1.write(str(cmd)) th = connect_serial(conn1) list1.append(th) th.start() for th1 in list1: print 'started joining',th1.getName(), 'counter :',th1.count th1.join() print time.ctime() -- http://mail.python.org/mailman/listinfo/python-list