Re: [PATCH v2] tests/stream-under-throttle: New test
Am 07.12.22 um 13:56 schrieb Christian Borntraeger: Am 07.12.22 um 11:31 schrieb Christian Borntraeger: Am 14.11.22 um 10:52 schrieb Hanna Reitz: Test streaming a base image into the top image underneath two throttle nodes. This was reported to make qemu 7.1 hang (https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as a regression test. Signed-off-by: Hanna Reitz --- Based-on: <20221107151321.211175-1-hre...@redhat.com> v1: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00368.html v2: - Replace `asyncio.exceptions.TimeoutError` by `asyncio.TimeoutError`: Stefan reported that the CI does not recognize the former: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00424.html As far as I understand, the latter was basically moved to become the former in Python 3.11, and an alias remains, so both are basically equivalent. I only have 3.10, though, where the documentation says that both are different, even though using either seems to work fine (i.e. both catch the timeout there). Not sure about previous versions, but the CI seems pretty certain about not knowing `asyncio.exceptions.TimeoutError`, so use `asyncio.TimeoutError` instead. (Even though that is deprecated in 3.11, but this is not the first place in the tree to use it, so it should not be too bad.) --- .../qemu-iotests/tests/stream-under-throttle | 121 ++ .../tests/stream-under-throttle.out | 5 + 2 files changed, 126 insertions(+) create mode 100755 tests/qemu-iotests/tests/stream-under-throttle create mode 100644 tests/qemu-iotests/tests/stream-under-throttle.out As a heads up, I do get the following on s390. I have not yet looked into that: +EE +== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +-- +Traceback (most recent call last): + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 110, in test_stream + self.vm.run_job('stream') + File "qemu/tests/qemu-iotests/iotests.py", line 986, in run_job + result = self.qmp('query-jobs') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp + ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd + return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj + self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper + raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +-- +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 533, in _soft_shutdown + self.qmp('quit') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp + ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd + return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj + self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper + raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +During handling of the above exception, another exception occurred: + +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 554, in _do_shutdown + self._soft_shutdown(timeout) + File "qemu/python/qemu/machine/machine.py", line 536, in _soft_shutdown + self._close_qmp_connection() + File "qemu/python/qemu/machine/machine.py", line 476, in _close_qmp_connection + self._qmp.close() + File "qemu/python/qemu/qmp/legacy.py", line 277, in close + self._sync( + File "qemu/python/qemu/qmp/legacy.py", line 94, in _sync + return self._aloop.run_until_complete( + File "/usr/lib64/python3.10/asyncio/base_events.py", line 649, in run_until_complete + return future.result() + File "/usr/lib64/python3.10/asyncio/tasks.py", line 408, in wait_for + return await fut + File "qemu/python/qemu/qmp/protocol.py", line 398, in disconnect + await self._wait_disconnect() + File "qemu/python/qemu/qmp/protocol.py", line 710, in _wait_disconnect + await all_defined_tasks # Raise Exceptions from the bottom half. + File "qemu/python/qemu/qmp/protocol.py", line 861, in _bh_loop_forever + await async_fn() + File "qemu/python/qemu/qmp/protocol.py", line 899, in
Re: [PATCH v2] tests/stream-under-throttle: New test
Am 07.12.22 um 11:31 schrieb Christian Borntraeger: Am 14.11.22 um 10:52 schrieb Hanna Reitz: Test streaming a base image into the top image underneath two throttle nodes. This was reported to make qemu 7.1 hang (https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as a regression test. Signed-off-by: Hanna Reitz --- Based-on: <20221107151321.211175-1-hre...@redhat.com> v1: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00368.html v2: - Replace `asyncio.exceptions.TimeoutError` by `asyncio.TimeoutError`: Stefan reported that the CI does not recognize the former: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00424.html As far as I understand, the latter was basically moved to become the former in Python 3.11, and an alias remains, so both are basically equivalent. I only have 3.10, though, where the documentation says that both are different, even though using either seems to work fine (i.e. both catch the timeout there). Not sure about previous versions, but the CI seems pretty certain about not knowing `asyncio.exceptions.TimeoutError`, so use `asyncio.TimeoutError` instead. (Even though that is deprecated in 3.11, but this is not the first place in the tree to use it, so it should not be too bad.) --- .../qemu-iotests/tests/stream-under-throttle | 121 ++ .../tests/stream-under-throttle.out | 5 + 2 files changed, 126 insertions(+) create mode 100755 tests/qemu-iotests/tests/stream-under-throttle create mode 100644 tests/qemu-iotests/tests/stream-under-throttle.out As a heads up, I do get the following on s390. I have not yet looked into that: +EE +== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +-- +Traceback (most recent call last): + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 110, in test_stream + self.vm.run_job('stream') + File "qemu/tests/qemu-iotests/iotests.py", line 986, in run_job + result = self.qmp('query-jobs') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp + ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd + return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj + self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper + raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +-- +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 533, in _soft_shutdown + self.qmp('quit') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp + ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd + return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj + self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper + raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +During handling of the above exception, another exception occurred: + +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 554, in _do_shutdown + self._soft_shutdown(timeout) + File "qemu/python/qemu/machine/machine.py", line 536, in _soft_shutdown + self._close_qmp_connection() + File "qemu/python/qemu/machine/machine.py", line 476, in _close_qmp_connection + self._qmp.close() + File "qemu/python/qemu/qmp/legacy.py", line 277, in close + self._sync( + File "qemu/python/qemu/qmp/legacy.py", line 94, in _sync + return self._aloop.run_until_complete( + File "/usr/lib64/python3.10/asyncio/base_events.py", line 649, in run_until_complete + return future.result() + File "/usr/lib64/python3.10/asyncio/tasks.py", line 408, in wait_for + return await fut + File "qemu/python/qemu/qmp/protocol.py", line 398, in disconnect + await self._wait_disconnect() + File "qemu/python/qemu/qmp/protocol.py", line 710, in _wait_disconnect + await all_defined_tasks # Raise Exceptions from the bottom half. + File "qemu/python/qemu/qmp/protocol.py", line 861, in _bh_loop_forever + await async_fn() + File "qemu/python/qemu/qmp/protocol.py", line 899, in _bh_recv_message + msg = await self._recv() + File
Re: [PATCH v2] tests/stream-under-throttle: New test
Am 14.11.22 um 10:52 schrieb Hanna Reitz: Test streaming a base image into the top image underneath two throttle nodes. This was reported to make qemu 7.1 hang (https://gitlab.com/qemu-project/qemu/-/issues/1215), so this serves as a regression test. Signed-off-by: Hanna Reitz --- Based-on: <20221107151321.211175-1-hre...@redhat.com> v1: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00368.html v2: - Replace `asyncio.exceptions.TimeoutError` by `asyncio.TimeoutError`: Stefan reported that the CI does not recognize the former: https://lists.nongnu.org/archive/html/qemu-block/2022-11/msg00424.html As far as I understand, the latter was basically moved to become the former in Python 3.11, and an alias remains, so both are basically equivalent. I only have 3.10, though, where the documentation says that both are different, even though using either seems to work fine (i.e. both catch the timeout there). Not sure about previous versions, but the CI seems pretty certain about not knowing `asyncio.exceptions.TimeoutError`, so use `asyncio.TimeoutError` instead. (Even though that is deprecated in 3.11, but this is not the first place in the tree to use it, so it should not be too bad.) --- .../qemu-iotests/tests/stream-under-throttle | 121 ++ .../tests/stream-under-throttle.out | 5 + 2 files changed, 126 insertions(+) create mode 100755 tests/qemu-iotests/tests/stream-under-throttle create mode 100644 tests/qemu-iotests/tests/stream-under-throttle.out As a heads up, I do get the following on s390. I have not yet looked into that: +EE +== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +-- +Traceback (most recent call last): + File "qemu/tests/qemu-iotests/tests/stream-under-throttle", line 110, in test_stream +self.vm.run_job('stream') + File "qemu/tests/qemu-iotests/iotests.py", line 986, in run_job +result = self.qmp('query-jobs') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp +ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd +return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj +self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper +raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +== +ERROR: test_stream (__main__.TestStreamWithThrottle) +Do a simple stream beneath the two throttle nodes. Should complete +-- +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 533, in _soft_shutdown +self.qmp('quit') + File "qemu/python/qemu/machine/machine.py", line 646, in qmp +ret = self._qmp.cmd(cmd, args=qmp_args) + File "qemu/python/qemu/qmp/legacy.py", line 204, in cmd +return self.cmd_obj(qmp_cmd) + File "qemu/python/qemu/qmp/legacy.py", line 184, in cmd_obj +self._qmp._raw(qmp_cmd, assign_id=False), + File "qemu/python/qemu/qmp/protocol.py", line 154, in _wrapper +raise StateError(emsg, proto.runstate, required_state) +qemu.qmp.protocol.StateError: QMPClient is disconnecting. Call disconnect() to return to IDLE state. + +During handling of the above exception, another exception occurred: + +Traceback (most recent call last): + File "qemu/python/qemu/machine/machine.py", line 554, in _do_shutdown +self._soft_shutdown(timeout) + File "qemu/python/qemu/machine/machine.py", line 536, in _soft_shutdown +self._close_qmp_connection() + File "qemu/python/qemu/machine/machine.py", line 476, in _close_qmp_connection +self._qmp.close() + File "qemu/python/qemu/qmp/legacy.py", line 277, in close +self._sync( + File "qemu/python/qemu/qmp/legacy.py", line 94, in _sync +return self._aloop.run_until_complete( + File "/usr/lib64/python3.10/asyncio/base_events.py", line 649, in run_until_complete +return future.result() + File "/usr/lib64/python3.10/asyncio/tasks.py", line 408, in wait_for +return await fut + File "qemu/python/qemu/qmp/protocol.py", line 398, in disconnect +await self._wait_disconnect() + File "qemu/python/qemu/qmp/protocol.py", line 710, in _wait_disconnect +await all_defined_tasks # Raise Exceptions from the bottom half. + File "qemu/python/qemu/qmp/protocol.py", line 861, in _bh_loop_forever +await async_fn() + File "qemu/python/qemu/qmp/protocol.py", line 899, in _bh_recv_message +msg = await self._recv() + File "qemu/python/qemu/qmp/protocol.py", line 1000, in _recv +