Hi,
I've seen that this issue has been brought up in the past, with little
discussion on a resolution. To express that I would be interested in
a resolution, and to provide hopefully-useful details, I'm sharing my
experiences with emulating x86_64 machines running Linux with kqemu.
My host machine runs Debian Etch, with the linux-image-2.6.18-3-amd64
2.6.18-7 kernel package installed. This kernel was compiled with GCC
4.1.2.
Prior to trying kqemu, I ran several instances of qemu-system-x86_64
simultaneously without a hitch (besides performance). These were all
running Linux 2.6.
With kqemu, most of the VMs crash. At least one of them crashed
consistently in the same place in its boot process; I've attached a
boot log, which includes the exact command used to invoke qemu[1], all
standard output and standard error output from qemu, and all console
output from the emulated Linux system. The boot script in effect at
the point of the crash was modified to echo all commands prior to
execution (set -x).
Other VMs crashed at unrelated points in the boot process; the systems
in these VMs differed greatly in configuration from the reference VM,
though.
Upon the crash of qemu, the host kernel printed the following message,
which seems to be consistent for me whenever qemu crashes under these
circumstances:
--->8--->8---
kqemu: aborting: Unexpected exception 0x0d in monitor space
err=0000 CS:EIP=f180:00000000f0002806 SS:SP=0000:00000000f00c7e60
---8<---8<---
I did notice one VM, running an old kernel, is not affected. I've
determined that 2.6.15.7 is the latest version of the Linux kernel I
can use on a qemu x86_64 VM running with kqemu; 2.6.16-rc1 and later
will crash qemu. Therefore, the workaround for those wishing to run
Linux on qemu-system-x86_64 with kqemu is to use 2.6.15.7.
Also attached is a copy of the .config file for one kernel I built and
tried, version 2.6.16.38, in-case it aids in reproducing the problem.
Even with kqemu, things aren't tremendously fast: subjectively, things
seem faster than without kqemu. I don't have a good benchmark yet,
but I do have a highly anecdotal and unscientific example of how bad
the performance of my current configuration with kqemu is: a network
transfer, received with netcat and written to disk yielded ~800KB/s
throughput for the first couple of minutes, which is when I aborted.
(After shutting down the VM,) a transfer of the same file, from the same
source system, to the same filesystem, with the same tools yielded
about 8MB/s (+/- 1MB/s) through the entire transmission.
I'm happy to help by providing further details or testing certain
configurations or certain patches. Thanks,
1. QEMU_TMPDIR=/tmp is on the environment (not reflected in the log).
On my host, /tmp is a large tmpfs filesystem.
--
J.P. Larocque: <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
2007-01-21 18:34:23.880508500 vm-bl: ERROR while getting interface flags: No
such device
2007-01-21 18:34:23.889790500 ifdown: interface vm-bl not configured
2007-01-21 18:34:24.096941500 qemu_start.py: Starting.
2007-01-21 18:34:24.096985500 qemu_start.py: Acquiring lock.
2007-01-21 18:34:24.097249500 qemu_start.py: Executing: ['qemu-system-x86_64',
'-serial', 'stdio', '-nographic', '-monitor', 'pipe:monitor', '-m', '96',
'-net', 'nic,model=rtl8139,macaddr=F2:85:2D:E1:DF:B8', '-net',
'tap,fd=3,script=/bin/true', '-hda', 'hda', '-hdb', 'hdb', '-hdc', 'hdc']
2007-01-21 18:34:24.101251500 ### started child, pid 5238.
2007-01-21 18:34:24.101312500 ### signal handlers installed.
2007-01-21 18:34:24.101341500 ### instantiated monitor.
2007-01-21 18:34:24.101358500 ### child is running loop:
2007-01-21 18:34:24.101376500 ### waiting for child.
2007-01-21 18:34:24.363769500
Press any key to continue.
2007-01-21 18:34:26.021207500 Restarting radvd:
Press any key to continue.
2007-01-21 18:34:27.128151500 radvd.
2007-01-21 18:34:27.179877500
Press any key to continue.
2007-01-21 18:34:27.188327500
2007-01-21 18:34:27.188445500
2007-01-21 18:34:27.188537500 GNU GRUB version 0.97 (639K lower / 97280K
upper memory)
2007-01-21 18:34:27.191647500
2007-01-21 18:34:27.191775500
-------------------------------------------------------------------
2007-01-21 18:34:27.194931500 0: Debian GNU/Linux, kernel 2.6.18-3-amd64
2007-01-21 18:34:27.196909500 1: Debian GNU/Linux, kernel 2.6.18-3-amd64
(single-user mode)
2007-01-21 18:34:27.199923500
-------------------------------------------------------------------
2007-01-21 18:34:27.203141500
2007-01-21 18:34:27.203234500 Use the ^ and v keys to select which entry is
highlighted.
2007-01-21 18:34:27.205985500 Press enter to boot the selected OS, 'e' to
edit the
2007-01-21 18:34:27.208697500 commands before booting, or 'c' for a
command-line.
2007-01-21 18:34:27.219204500
2007-01-21 18:34:27.219324500 The selected entry is 0
Entry 0 will be booted automatically in 5 seconds.
Entry 0 will be booted automatically in 4 seconds.
Entry 0 will be booted automatically in 3 seconds.
Entry 0 will be booted automatically in 2 seconds.
Entry 0 will be booted automatically in 1 seconds.
2007-01-21 18:34:32.179191500 Booting 'Debian GNU/Linux, kernel
2.6.18-3-amd64'
2007-01-21 18:34:32.181461500
2007-01-21 18:34:32.182378500 root (hd0,0)
2007-01-21 18:34:32.185185500 Filesystem type is ext2fs, partition type 0x83
2007-01-21 18:34:32.187684500 kernel /vmlinuz-2.6.18-3-amd64 console=tty0
console=ttyS0,38400 noapic root=/d
2007-01-21 18:34:32.191321500 ev/hdb ro
2007-01-21 18:34:32.206421500 [Linux-bzImage, setup=0x1e00, size=0x16f5f0]
2007-01-21 18:34:32.293929500 initrd /initrd.img-2.6.18-3-amd64
2007-01-21 18:34:32.622265500 [Linux-initrd @ 0x5b2c000, 0x4c36c8 bytes]
2007-01-21 18:34:32.624692500 savedefault
2007-01-21 18:34:32.631394500
2007-01-21 18:34:33.624239500 Bootdata ok (command line is console=tty0
console=ttyS0,38400 noapic root=/dev/hdb ro )
2007-01-21 18:34:33.628510500 Linux version 2.6.18-3-amd64 (Debian 2.6.18-7)
([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20))
#1 SMP Mon Dec 4 17:04:37 CET 2006
2007-01-21 18:34:33.635945500 BIOS-provided physical RAM map:
2007-01-21 18:34:33.637371500 BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
2007-01-21 18:34:33.640150500 BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
2007-01-21 18:34:33.642721500 BIOS-e820: 00000000000e8000 - 0000000000100000
(reserved)
2007-01-21 18:34:33.645613500 BIOS-e820: 0000000000100000 - 0000000006000000
(usable)
2007-01-21 18:34:33.648387500 BIOS-e820: 00000000fffc0000 - 0000000100000000
(reserved)
2007-01-21 18:34:33.651271500 DMI not present or invalid.
2007-01-21 18:34:33.652550500 No NUMA configuration found
2007-01-21 18:34:33.653803500 Faking a node at 0000000000000000-0000000006000000
2007-01-21 18:34:33.656332500 Bootmem setup node 0
0000000000000000-0000000006000000
2007-01-21 18:34:33.658735500 No mptable found.
2007-01-21 18:34:33.659863500 ACPI: PM-Timer IO Port: 0xb008
2007-01-21 18:34:33.661250500 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
2007-01-21 18:34:33.674393500 Processor #0 6:2 APIC version 17
2007-01-21 18:34:33.676265500 ACPI: Skipping IOAPIC probe due to 'noapic'
option.
2007-01-21 18:34:33.678536500 Allocating PCI resources starting at 10000000
(gap: 6000000:f9fc0000)
2007-01-21 18:34:33.683760500 SMP: Allowing 1 CPUs, 0 hotplug CPUs
2007-01-21 18:34:33.685406500 Built 1 zonelists. Total pages: 23261
2007-01-21 18:34:33.689329500 Kernel command line: console=tty0
console=ttyS0,38400 noapic root=/dev/hdb ro
2007-01-21 18:34:33.693146500 Initializing CPU#0
2007-01-21 18:34:33.694027500 PID hash table entries: 512 (order: 9, 4096 bytes)
2007-01-21 18:34:33.698344500 time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC
timer.
2007-01-21 18:34:33.701110500 time.c: Detected 2010.197 MHz processor.
2007-01-21 18:34:33.705042500 Console: colour VGA+ 80x25
2007-01-21 18:34:33.708549500 Dentry cache hash table entries: 16384 (order: 5,
131072 bytes)
2007-01-21 18:34:33.714456500 Inode-cache hash table entries: 8192 (order: 4,
65536 bytes)
2007-01-21 18:34:33.717902500 Checking aperture...
2007-01-21 18:34:33.726442500 Memory: 87896k/98304k available (1929k kernel
code, 10020k reserved, 864k data, 176k init)
2007-01-21 18:34:33.815159500 Calibrating delay using timer specific routine..
4116.65 BogoMIPS (lpj=8233314)
2007-01-21 18:34:33.820648500 Security Framework v1.0.0 initialized
2007-01-21 18:34:33.822768500 SELinux: Disabled at boot.
2007-01-21 18:34:33.824680500 Capability LSM initialized
2007-01-21 18:34:33.826616500 Mount-cache hash table entries: 256
2007-01-21 18:34:33.833409500 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
(64 bytes/line)
2007-01-21 18:34:33.836827500 CPU: L2 Cache: 512K (64 bytes/line)
2007-01-21 18:34:33.838498500 CPU 0/0 -> Node 0
2007-01-21 18:34:33.840176500 SMP alternatives: switching to UP code
2007-01-21 18:34:33.843175500 Freeing SMP alternatives: 28k freed
2007-01-21 18:34:33.845225500 ACPI: Core revision 20060707
2007-01-21 18:34:33.865811500 ACPI: setting ELCR to 0800 (from 0c00)
2007-01-21 18:34:33.869593500 SMP motherboard not detected.
2007-01-21 18:34:33.872834500 Using local APIC timer interrupts.
2007-01-21 18:34:33.924414500 result 62518007
2007-01-21 18:34:33.925265500 Detected 62.518 MHz APIC timer.
2007-01-21 18:34:33.930417500 testing NMI watchdog ... CPU#0: NMI appears to be
stuck (0->0)!
2007-01-21 18:34:33.976240500 SMP disabled
2007-01-21 18:34:33.978440500 Brought up 1 CPUs
2007-01-21 18:34:33.979880500 testing NMI watchdog ... CPU#0: NMI appears to be
stuck (0->0)!
2007-01-21 18:34:34.026635500 migration_cost=0
2007-01-21 18:34:34.031695500 checking if image is initramfs... it is
2007-01-21 18:34:37.984828500 Freeing initrd memory: 4877k freed
2007-01-21 18:34:38.000898500 NET: Registered protocol family 16
2007-01-21 18:34:38.006447500 ACPI: bus type pci registered
2007-01-21 18:34:38.008645500 PCI: Using configuration type 1
2007-01-21 18:34:38.026665500 ACPI: Interpreter enabled
2007-01-21 18:34:38.028611500 ACPI: Using PIC for interrupt routing
2007-01-21 18:34:38.040718500 ACPI: PCI Root Bridge [PCI0] (0000:00)
2007-01-21 18:34:38.044767500 ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
2007-01-21 18:34:38.064128500 PCI quirk: region b000-b03f claimed by PIIX4 ACPI
2007-01-21 18:34:38.099794500 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9
10 *11 12)
2007-01-21 18:34:38.109237500 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9
10 11 12) *0, disabled.
2007-01-21 18:34:38.120096500 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9
*10 11 12)
2007-01-21 18:34:38.129688500 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9
10 11 12) *0, disabled.
2007-01-21 18:34:38.137509500 Linux Plug and Play Support v0.97 (c) Adam Belay
2007-01-21 18:34:38.141219500 pnp: PnP ACPI init
2007-01-21 18:34:38.164090500 pnp: PnP ACPI: found 6 devices
2007-01-21 18:34:38.167469500 usbcore: registered new driver usbfs
2007-01-21 18:34:38.170269500 usbcore: registered new driver hub
2007-01-21 18:34:38.174197500 PCI: Using ACPI for IRQ routing
2007-01-21 18:34:38.176294500 PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
2007-01-21 18:34:38.184442500 PCI-GART: No AMD northbridge found.
2007-01-21 18:34:38.196028500 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
2007-01-21 18:34:38.200477500 NET: Registered protocol family 2
2007-01-21 18:34:38.240702500 IP route cache hash table entries: 1024 (order:
1, 8192 bytes)
2007-01-21 18:34:38.245928500 TCP established hash table entries: 4096 (order:
4, 65536 bytes)
2007-01-21 18:34:38.249713500 TCP bind hash table entries: 2048 (order: 3,
32768 bytes)
2007-01-21 18:34:38.253017500 TCP: Hash tables configured (established 4096
bind 2048)
2007-01-21 18:34:38.256108500 TCP reno registered
2007-01-21 18:34:38.287765500 audit: initializing netlink socket (disabled)
2007-01-21 18:34:38.290292500 audit(1169433276.532:1): initialized
2007-01-21 18:34:38.297287500 VFS: Disk quotas dquot_6.5.1
2007-01-21 18:34:38.299519500 Dquot-cache hash table entries: 512 (order 0,
4096 bytes)
2007-01-21 18:34:38.305595500 Initializing Cryptographic API
2007-01-21 18:34:38.307654500 io scheduler noop registered
2007-01-21 18:34:38.309301500 io scheduler anticipatory registered
2007-01-21 18:34:38.313194500 io scheduler deadline registered
2007-01-21 18:34:38.315622500 io scheduler cfq registered (default)
2007-01-21 18:34:38.317541500 PCI: PIIX3: Enabling Passive Release on
0000:00:01.0
2007-01-21 18:34:38.322050500 Limiting direct PCI/PCI transfers.
2007-01-21 18:34:38.324152500 Activating ISA DMA hang workarounds.
2007-01-21 18:34:38.411675500 Real Time Clock Driver v1.12ac
2007-01-21 18:34:38.414092500 Linux agpgart interface v0.101 (c) Dave Jones
2007-01-21 18:34:38.416906500 Serial: 8250/16550 driver $Revision: 1.90 $ 4
ports, IRQ sharing enabled
2007-01-21 18:34:38.422130500 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a
16450
2007-01-21 18:34:38.432460500 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
2007-01-21 18:34:38.461231500 RAMDISK driver initialized: 16 RAM disks of
65536K size 1024 blocksize
2007-01-21 18:34:38.469856500 usbmon: debugfs is not available
2007-01-21 18:34:38.475762500 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
2007-01-21 18:34:38.482789500 serio: i8042 AUX port at 0x60,0x64 irq 12
2007-01-21 18:34:38.485755500 serio: i8042 KBD port at 0x60,0x64 irq 1
2007-01-21 18:34:38.493751500 mice: PS/2 mouse device common for all mice
2007-01-21 18:34:38.498153500 TCP bic registered
2007-01-21 18:34:38.500700500 NET: Registered protocol family 1
2007-01-21 18:34:38.502458500 NET: Registered protocol family 17
2007-01-21 18:34:38.505662500 NET: Registered protocol family 8
2007-01-21 18:34:38.508656500 NET: Registered protocol family 20
2007-01-21 18:34:38.516740500 input: AT Translated Set 2 keyboard as
/class/input/input0
2007-01-21 18:34:38.521530500 ACPI: (supports S5)
2007-01-21 18:34:38.524835500 Freeing unused kernel memory: 176k freed
2007-01-21 18:34:38.575597500 Loading, please wait...
2007-01-21 18:34:39.401468500 Begin: Loading essential drivers... ...
2007-01-21 18:34:39.538622500 Done.
2007-01-21 18:34:39.658784500 Begin: Running /scripts/init-premount ...
2007-01-21 18:34:42.168324500 Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
2007-01-21 18:34:42.171559500 ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
2007-01-21 18:34:42.187912500 PIIX3: IDE controller at PCI slot 0000:00:01.1
2007-01-21 18:34:42.190370500 PIIX3: chipset revision 0
2007-01-21 18:34:42.193296500 PIIX3: not 100% native mode: will probe irqs later
2007-01-21 18:34:42.197332500 ide0: BM-DMA at 0xc000-0xc007, BIOS settings:
hda:pio, hdb:pio
2007-01-21 18:34:42.202206500 ide1: BM-DMA at 0xc008-0xc00f, BIOS settings:
hdc:pio, hdd:pio
2007-01-21 18:34:42.241484500 8139too Fast Ethernet driver 0.9.27
2007-01-21 18:34:42.623563500 hda: QEMU HARDDISK, ATA DISK drive
2007-01-21 18:34:42.903484500 hdb: QEMU HARDDISK, ATA DISK drive
2007-01-21 18:34:42.960898500 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
2007-01-21 18:34:43.251453500 hdc: QEMU HARDDISK, ATA DISK drive
2007-01-21 18:34:44.134536500 ide1 at 0x170-0x177,0x376 on irq 15
2007-01-21 18:34:44.134538500 8139too 0000:00:03.0: This (id 10ec:8139 rev 20)
is an enhanced 8139C+ chip
2007-01-21 18:34:44.134539500 8139too 0000:00:03.0: Use the "8139cp" driver for
improved performance and stability.
2007-01-21 18:34:44.134541500 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
2007-01-21 18:34:44.134541500 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link
[LNKC] -> GSI 10 (level, low) -> IRQ 10
2007-01-21 18:34:44.134543500 eth0: RealTek RTL8139 at 0xffffc2000000c000,
f2:85:2d:e1:df:b8, IRQ 10
2007-01-21 18:34:44.134565500 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22,
2004)
2007-01-21 18:34:44.134566500 hda: max request size: 512KiB
2007-01-21 18:34:44.134567500 hda: 32768 sectors (16 MB) w/256KiB Cache,
CHS=32/255/63, (U)DMA
2007-01-21 18:34:44.134568500 hda: set_multmode: status=0x41 { DriveReady Error
}
2007-01-21 18:34:44.134569500 hda: set_multmode: error=0x04 { DriveStatusError }
2007-01-21 18:34:44.134570500 ide: failed opcode was: 0xef
2007-01-21 18:34:44.134574500 hda: cache flushes supported
2007-01-21 18:34:44.134574500 hda: hda1
2007-01-21 18:34:44.716987500 hdb: max request size: 512KiB
2007-01-21 18:34:44.716989500 hdb: 1649999872 sectors (844799 MB) w/256KiB
Cache, CHS=65535/255/63, (U)DMA
2007-01-21 18:34:44.716991500 hdb: set_multmode: status=0x41 { DriveReady Error
}
2007-01-21 18:34:44.716992500 hdb: set_multmode: error=0x04 { DriveStatusError }
2007-01-21 18:34:44.716993500 ide: failed opcode was: 0xef
2007-01-21 18:34:44.716993500 hdb: cache flushes supported
2007-01-21 18:34:44.716994500 hdb: unknown partition table
2007-01-21 18:34:44.716995500 hdc: max request size: 512KiB
2007-01-21 18:34:44.717016500 hdc: 819200 sectors (419 MB) w/256KiB Cache,
CHS=812/255/63, (U)DMA
2007-01-21 18:34:44.717017500 hdc: set_multmode: status=0x41 { DriveReady Error
}
2007-01-21 18:34:44.717018500 hdc: set_multmode: error=0x04 { DriveStatusError }
2007-01-21 18:34:44.717019500 ide: failed opcode was: 0xef
2007-01-21 18:34:44.717019500 hdc: cache flushes supported
2007-01-21 18:34:44.717020500 hdc: unknown partition table
2007-01-21 18:34:45.891272500 Done.
2007-01-21 18:34:45.891274500 Begin: Mounting root file system... ...
2007-01-21 18:34:45.891275500 Begin: Running /scripts/local-top ...
2007-01-21 18:34:46.806869500 Done.
2007-01-21 18:34:46.976012500 Begin: Running /scripts/local-premount ...
2007-01-21 18:34:47.213847500 kinit: name_to_dev_t(/dev/hdc) = hdc(22,0)
2007-01-21 18:34:47.216723500 kinit: trying to resume from /dev/hdc
2007-01-21 18:34:47.218751500 Attempting manual resume
2007-01-21 18:34:47.221365500 kinit: No resume image, doing normal boot...
2007-01-21 18:34:47.294143500 Done.
2007-01-21 18:34:47.545398500 kjournald starting. Commit interval 5 seconds
2007-01-21 18:34:47.548560500 EXT3-fs: mounted filesystem with ordered data
mode.
2007-01-21 18:34:47.618835500 Begin: Running /scripts/local-bottom ...
2007-01-21 18:34:47.717782500 Done.
2007-01-21 18:34:47.814154500 Done.
2007-01-21 18:34:47.936679500 Begin: Running /scripts/init-bottom ...
2007-01-21 18:34:48.688970500 Done.
2007-01-21 18:34:49.226273500
INIT: version 2.86 booting
2007-01-21 18:34:50.350392500 Setting hostname to 'blue-lines'...done.
2007-01-21 18:34:51.341944500 Starting the hotplug events dispatcher: udevd.
2007-01-21 18:34:51.647406500 Synthesizing the initial hotplug events...done.
2007-01-21 18:34:52.267425500 Waiting for /dev to be fully populated... RAM
(4096 kB) at 0xxe0000000, Cirrus Logic chipset on PCI bus
2007-01-21 18:34:55.148038500 cirrusfb: Driver for Cirrus Logic based graphic
boards, v2.0-pre2
2007-01-21 18:34:55.390415500 Console: switching to colour frame buffer device
80x30
2007-01-21 18:34:55.420648500 piix4_smbus 0000:00:01.3: Found 0000:00:01.3
device
2007-01-21 18:34:55.423938500 piix4_smbus 0000:00:01.3: SMB base address
uninitialized - upgrade BIOS or use force_addr=0xaddr
2007-01-21 18:34:55.801387500 input: ImExPS/2 Generic Explorer Mouse as
/class/input/input1
2007-01-21 18:34:55.812521500 input: PC Speaker as /class/input/input2
2007-01-21 18:34:56.337253500 parport: PnPBIOS parport detected.
2007-01-21 18:34:56.342257500 parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
2007-01-21 18:34:56.559550500 ts: Compaq touchscreen protocol output
2007-01-21 18:34:56.970733500 done.
2007-01-21 18:34:58.065742500 Activating swap:swapon on /dev/hdc
2007-01-21 18:34:58.118265500 Adding 409592k swap on /dev/hdc. Priority:-1
extents:1 across:409592k
2007-01-21 18:34:58.219137500 .
2007-01-21 18:34:58.336275500 Will now check root file system:fsck 1.40-WIP
(14-Nov-2006)
2007-01-21 18:34:58.471863500 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0
/dev/hdb
2007-01-21 18:34:58.564725500 /dev/hdb: clean, 3622061/103137280 files,
204408136/206249984 blocks
2007-01-21 18:34:58.697286500 .
2007-01-21 18:34:58.733722500 EXT3 FS on hdb, internal journal
2007-01-21 18:34:58.987484500 Setting the system clock again..
2007-01-21 18:34:59.253058500 System Clock set. Local time: Mon Jan 22 02:34:58
UTC 2007.
2007-01-21 18:35:00.406467500 Cleaning up ifupdown....
2007-01-21 18:35:00.656355500 Loading kernel module 8139cp.
2007-01-21 18:35:00.840976500 [33m*[39;49m /etc/modprobe.conf exists but does
not include /etc/modprobe.d/!
2007-01-21 18:35:00.957078500 Loading device-mapper supportdevice-mapper:
ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED]
2007-01-21 18:35:01.198136500 .
2007-01-21 18:35:01.398735500 Will now check all file systems.
2007-01-21 18:35:01.469069500 fsck 1.40-WIP (14-Nov-2006)
2007-01-21 18:35:01.470475500 Checking all file systems.
2007-01-21 18:35:01.472229500 [/sbin/fsck.ext2 (1) -- /boot] fsck.ext2 -a -C0
/dev/hda1
2007-01-21 18:35:01.520861500 /dev/hda1: clean, 28/4016 files, 8223/16033 blocks
2007-01-21 18:35:01.529363500 Done checking file systems.
2007-01-21 18:35:01.530908500 A log is being saved in /var/log/fsck/checkfs if
that location is writable.
2007-01-21 18:35:01.646338500 Setting kernel variables...error:
"fs.nfs.nlm_udpport" is an unknown key
2007-01-21 18:35:01.689676500 error: "fs.nfs.nlm_tcpport" is an unknown key
2007-01-21 18:35:01.801458500 [31mfailed.[39;49m
2007-01-21 18:35:01.986910500 Will now mount local filesystems:.
2007-01-21 18:35:02.309896500 Will now activate swapfile swap:done.
2007-01-21 18:35:02.483088500 + . /lib/init/vars.sh
2007-01-21 18:35:02.485680500 ++ '[' -f /etc/default/rcS ']'
2007-01-21 18:35:02.488073500 ++ . /etc/default/rcS
2007-01-21 18:35:02.489975500 +++ TMPTIME=0
2007-01-21 18:35:02.490901500 +++ SULOGIN=no
2007-01-21 18:35:02.492400500 +++ DELAYLOGIN=yes
2007-01-21 18:35:02.493446500 +++ UTC=yes
2007-01-21 18:35:02.494182500 +++ VERBOSE=yes
2007-01-21 18:35:02.495081500 +++ EDITMOTD=yes
2007-01-21 18:35:02.496639500 +++ FSCKFIX=no
2007-01-21 18:35:02.497585500 ++ '[' '!' -e /proc/cmdline ']'
2007-01-21 18:35:02.500007500 ++ egrep -qw quiet /proc/cmdline
2007-01-21 18:35:02.554940500 ++ '[' '' ']'
2007-01-21 18:35:02.556715500 + . /lib/lsb/init-functions
2007-01-21 18:35:02.564479500 ++ FANCYTTY=
2007-01-21 18:35:02.565377500 ++ '[' -e /etc/lsb-base-logging.sh ']'
2007-01-21 18:35:02.569450500 ++ true
2007-01-21 18:35:02.573136500 + which find
2007-01-21 18:35:02.638656500 + which xargs
2007-01-21 18:35:02.684514500 + for D in /tmp /var/run /var/lock
2007-01-21 18:35:02.686553500 + '[' -f /tmp/.clean ']'
2007-01-21 18:35:02.688713500 + for D in /tmp /var/run /var/lock
2007-01-21 18:35:02.690473500 + '[' -f /var/run/.clean ']'
2007-01-21 18:35:02.692933500 + for D in /tmp /var/run /var/lock
2007-01-21 18:35:02.694704500 + '[' -f /var/lock/.clean ']'
2007-01-21 18:35:02.709158500 + '[' -f /tmp/.clean ']'
2007-01-21 18:35:02.710740500 + ES=0
2007-01-21 18:35:02.714854500 + '[' -d /tmp ']'
2007-01-21 18:35:02.716651500 + '[' -f /tmp/.clean ']'
2007-01-21 18:35:02.718136500 + clean_tmp
2007-01-21 18:35:02.721279500 + cd /tmp
2007-01-21 18:35:02.728694500 ++ find . -maxdepth 0 -perm -002
2007-01-21 18:35:02.776842500 + '[' . = . ']'
2007-01-21 18:35:02.778265500 + '[' '!' 0 ']'
2007-01-21 18:35:02.780029500 + '[' yes = no ']'
2007-01-21 18:35:02.781272500 + log_action_begin_msg 'Cleaning /tmp'
2007-01-21 18:35:02.783834500 + echo -n 'Cleaning /tmp...'
2007-01-21 18:35:02.785687500 Cleaning /tmp...+ rm -f '.X*-lock'
2007-01-21 18:35:02.806481500 + case "$TMPTIME" in
2007-01-21 18:35:02.809040500 + '[' 0 = 0 ']'
2007-01-21 18:35:02.810034500 + TEXPR=
2007-01-21 18:35:02.810610500 + DEXPR=
2007-01-21 18:35:02.812884500 + EXCEPT='! -name .
2007-01-21 18:35:02.813969500 ! ( -path ./lost+found -uid 0 )
2007-01-21 18:35:02.817001500 ! ( -path ./quota.user -uid 0 )
2007-01-21 18:35:02.818644500 ! ( -path ./aquota.user -uid 0 )
2007-01-21 18:35:02.821730500 ! ( -path ./quota.group -uid 0 )
2007-01-21 18:35:02.824835500 ! ( -path ./aquota.group -uid 0 )
2007-01-21 18:35:02.826564500 ! ( -path ./.journal -uid 0 )
2007-01-21 18:35:02.829539500 ! ( -path ./.clean -uid 0 )
2007-01-21 18:35:02.831134500 ! ( -path ./...security* -uid 0 )'
2007-01-21 18:35:02.834478500 + mkflagfile /tmp/.clean
2007-01-21 18:35:02.837550500 + '[' -L /tmp/.clean ']'
2007-01-21 18:35:02.840422500 + rm -f /tmp/.clean
2007-01-21 18:35:02.857082500 RAX=00002b03e193ab10 RBX=000000006ffffeff
RCX=00002b03e16044f0 RDX=00002b03e1704000
2007-01-21 18:35:02.857085500 RSI=00002b03e193ac40 RDI=00002b03e193d000
RBP=00007fffc94bc7a0 RSP=00007fffc94bc630
2007-01-21 18:35:02.857086500 R8 =000000006fffffff R9 =0000000070000021
R10=000000006ffffdff R11=000000006ffffe34
2007-01-21 18:35:02.857087500 R12=00002b03e16044b0 R13=000000006fffff40
R14=00007fffc94bc848 R15=00002b03e193c4e0
2007-01-21 18:35:02.857088500 RIP=00002b03e15f1588 RFL=00010202 [-------] CPL=3
II=0 A20=1 HLT=0
2007-01-21 18:35:02.857120500 ES =0000 0000000000000000 00000000 00000000
2007-01-21 18:35:02.857132500 CS =0033 0000000000000000 ffffffff 00affa00
2007-01-21 18:35:02.857143500 SS =002b 0000000000000000 ffffffff 00cff200
2007-01-21 18:35:02.857154500 DS =0000 0000000000000000 00000000 00000000
2007-01-21 18:35:02.857184500 FS =0000 0000000000000000 00000000 00000000
2007-01-21 18:35:02.857195500 GS =0000 0000000000000000 00000000 00000000
2007-01-21 18:35:02.857206500 LDT=0000 0000000000000000 00000000 00008000
2007-01-21 18:35:02.857217500 TR =0040 ffff810001003000 0000206f 01008900
2007-01-21 18:35:02.857228500 GDT= ffffffff80530000 00000080
2007-01-21 18:35:02.857239500 IDT= ffffffff804c6000 00000fff
2007-01-21 18:35:02.857250500 CR0=8005003b CR2=00002b03e193ab18
CR3=000000000571d000 CR4=000006e0
2007-01-21 18:35:02.857261500 Unsupported return value: 0xffffffff
2007-01-21 18:35:05.885048500 qemu_manager.py: child terminated with exit code
1.
2007-01-21 18:35:05.885051500 qemu_manager.py: waiting for signal before
terminating.
2007-01-21 18:35:05.885052500 ### sleeping.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16.38-custom-qemu
# Mon Jan 22 17:20:27 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_LBD=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=y
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_UNORDERED_IO=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=y
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
CONFIG_SCSI_SATA_NV=y
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=y
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=y
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8XX_TCO is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
CONFIG_OBSOLETE_OSS_DRIVER=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
CONFIG_SOUND_ICH=y
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
_______________________________________________
Qemu-devel mailing list
Qemu-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/qemu-devel
