Hi Simon,
On 12/4/19 2:55 PM, Simon Veith wrote:
> Per the specification, and as observed in hardware, the SMMUv3 aligns
> the SMMU_STRTAB_BASE address to the size of the table by masking out the
> respective least significant bits in the ADDR field.
>
> Apply this masking logic to our smmu_find_ste() lookup function per the
> specification.
>
> ref. ARM IHI 0070C, section 6.3.23.
>
> Signed-off-by: Simon Veith
> Cc: Eric Auger
> Cc: qemu-devel@nongnu.org
> Cc: qemu-...@nongnu.org
> ---
> hw/arm/smmuv3.c | 29 +
> 1 file changed, 25 insertions(+), 4 deletions(-)
>
> diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
> index aad4639..2d6c275 100644
> --- a/hw/arm/smmuv3.c
> +++ b/hw/arm/smmuv3.c
> @@ -376,8 +376,9 @@ bad_ste:
> static int smmu_find_ste(SMMUv3State *s, uint32_t sid, STE *ste,
> SMMUEventInfo *event)
> {
> -dma_addr_t addr;
> +dma_addr_t addr, strtab_base;
> uint32_t log2size;
> +int strtab_size_shift;
> int ret;
>
> trace_smmuv3_find_ste(sid, s->features, s->sid_split);
> @@ -391,10 +392,23 @@ static int smmu_find_ste(SMMUv3State *s, uint32_t sid,
> STE *ste,
> }
> if (s->features & SMMU_FEATURE_2LVL_STE) {
> int l1_ste_offset, l2_ste_offset, max_l2_ste, span;
> -dma_addr_t strtab_base, l1ptr, l2ptr;
> +dma_addr_t l1ptr, l2ptr;
> STEDesc l1std;
>
> -strtab_base = s->strtab_base & SMMU_BASE_ADDR_MASK;
> +/*
> + * Align strtab base address to table size. For this purpose, assume
> it
> + * is not bounded by SMMU_IDR1_SIDSIZE.
> + */
> +strtab_size_shift = log2size - s->sid_split - 1 + 3;
Maybe just as the spec use MAX(5, (LOG2SIZE-SPLIT-1+3))?
> +if (strtab_size_shift < DMA_ADDR_BITS) {
> +if (strtab_size_shift < 5) {
> +strtab_size_shift = 5;
> +}
> +strtab_base = s->strtab_base & SMMU_BASE_ADDR_MASK &
> + ~((1ULL << strtab_size_shift) - 1);
nit: you may use ~MAKE_64BIT_MASK(0, strtab_size_shift)
> +} else {
see below
> +strtab_base = 0;
> +}
> l1_ste_offset = sid >> s->sid_split;
> l2_ste_offset = sid & ((1 << s->sid_split) - 1);
> l1ptr = (dma_addr_t)(strtab_base + l1_ste_offset * sizeof(l1std));
> @@ -433,7 +447,14 @@ static int smmu_find_ste(SMMUv3State *s, uint32_t sid,
> STE *ste,
> }
> addr = l2ptr + l2_ste_offset * sizeof(*ste);
> } else {
> -addr = (s->strtab_base & SMMU_BASE_ADDR_MASK) + sid * sizeof(*ste);
> +strtab_size_shift = log2size + 5;
> +if (strtab_size_shift < DMA_ADDR_BITS) {
> +strtab_base = s->strtab_base & SMMU_BASE_ADDR_MASK &
> + ~((1ULL << strtab_size_shift) - 1);
> +} else {
Can it happen? I understand LOG2SIZE <= SMMU_S_IDR_5.SIDSIZE
and SIDSIZE is max 32. Same above?
> +strtab_base = 0;
> +}
> +addr = strtab_base + sid * sizeof(*ste);
> }
>
> if (smmu_get_ste(s, addr, ste, event)) {
>
Thank you for those series fixes.
Best Regards
Eric
