Re: [PATCH for-7.2 v3 10/20] hw/ppc: set machine->fdt in spapr machine
On 8/17/22 23:07, David Gibson wrote: On Tue, Aug 16, 2022 at 02:34:18PM -0300, Daniel Henrique Barboza wrote: The pSeries machine never bothered with the common machine->fdt attribute. We do all the FDT related work using spapr->fdt_blob. We're going to introduce HMP commands to read and save the FDT, which will rely on setting machine->fdt properly to work across all machine archs/types. Let's set machine->fdt in the two places where we manipulate the FDT: spapr_machine_reset() and CAS. So, there's a third place where fdt_blob is updated, in h_update_dt(); that happens because SLOF can make some updates to the DT that qemu needs to be aware of. It's kinda ugly, and is a consequence of the fact that qemu and SLOF kind of share the role of "platform firmware" for spapr. But.. it's worse than that. Those are the only 3 places we actually alter fdt_blob, but not the only places we logically update the device tree. Up until now there wasn't a way to introspect the DT, and so we didn't bother keeping spapr->fdt_blob update. Essentially, we considered maintaining the DT image the job of the guest after CAS. Specifically, every dynamic reconfiguration event (hotplug or unplug) alters the device tree. We generate an fdt fragment for the new device then stream that as an update to the guest using the PAPR specified interface (rtas_ibm_configure_connector). As noted we currently don't update qemu's global fdt image based on that. On hot unplug logically we need to revert those changes, which is actually pretty tricky, but currently the guest's job. Really, the trouble is that just dumping or viewing the dt is only simple in an "embedded" style environment where the fdt is generate then spit into the guest. In an actual open firmware environment like spapr, the DT is logically a dynamic thing maintained by firmware - but because "firmware"'s responsibility is split between SLOF and RTAS/qemu, keeping track of that is pretty nasty. For an environment like this, the flat tree format isn't really suited either - we'd want a dynamic representation of the tree. We get away with flat trees for now (barely) only because we mostly delegate the responsibility for managing the tree to SLOF and/or the OS kernel, both of which do use non-flat representations of the tree. Thanks for the explanation, but I'm not sure what to do with this patch now. Should I amend the commit msg to reflect what you explained, mentioning that we're missing a handful of places where the FDT is updated? We can then come back at a later time and update ms->fdt in those places as well. This would be a good follow-up to do after we get rid of spapr->fdt_blob and use ms->fdt only. Another alternative is to drop this patch and do spapr in separate later on. I can live with that, but I'd rather have something for spapr even under the disclaimer that "this might be not the most up to date FDT the guest is using". Thanks, Daniel spapr->fdt_blob is left untouched for now. To replace it with machine->fdt, since we're migrating spapr->fdt_blob, we would need to migrate machine->fdt as well. This is something that we would like to to do keep our code simpler but it's a work we'll do another day. Cc: Cédric Le Goater Cc: qemu-...@nongnu.org Signed-off-by: Daniel Henrique Barboza --- hw/ppc/spapr.c | 6 ++ hw/ppc/spapr_hcall.c | 8 2 files changed, 14 insertions(+) diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c index bc9ba6e6dc..7031cf964a 100644 --- a/hw/ppc/spapr.c +++ b/hw/ppc/spapr.c @@ -1713,6 +1713,12 @@ static void spapr_machine_reset(MachineState *machine) spapr->fdt_initial_size = spapr->fdt_size; spapr->fdt_blob = fdt; +/* + * Set the common machine->fdt pointer to enable support + * for 'dumpdtb' and 'info fdt' QMP/HMP commands. + */ +machine->fdt = fdt; + /* Set up the entry state */ first_ppc_cpu->env.gpr[5] = 0; diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c index a8d4a6bcf0..a53bfd76f4 100644 --- a/hw/ppc/spapr_hcall.c +++ b/hw/ppc/spapr_hcall.c @@ -1256,6 +1256,14 @@ target_ulong do_client_architecture_support(PowerPCCPU *cpu, spapr->fdt_initial_size = spapr->fdt_size; spapr->fdt_blob = fdt; +/* + * Set the machine->fdt pointer again since we just freed + * it above (by freeing spapr->fdt_blob). We set this + * pointer to enable support for 'dumpdtb' and 'info fdt' + * QMP/HMP commands. + */ +MACHINE(spapr)->fdt = fdt; + return H_SUCCESS; }
Re: [PATCH for-7.2 v3 10/20] hw/ppc: set machine->fdt in spapr machine
On Tue, Aug 16, 2022 at 02:34:18PM -0300, Daniel Henrique Barboza wrote: > The pSeries machine never bothered with the common machine->fdt > attribute. We do all the FDT related work using spapr->fdt_blob. > > We're going to introduce HMP commands to read and save the FDT, which > will rely on setting machine->fdt properly to work across all machine > archs/types. > > Let's set machine->fdt in the two places where we manipulate the FDT: > spapr_machine_reset() and CAS. So, there's a third place where fdt_blob is updated, in h_update_dt(); that happens because SLOF can make some updates to the DT that qemu needs to be aware of. It's kinda ugly, and is a consequence of the fact that qemu and SLOF kind of share the role of "platform firmware" for spapr. But.. it's worse than that. Those are the only 3 places we actually alter fdt_blob, but not the only places we logically update the device tree. Up until now there wasn't a way to introspect the DT, and so we didn't bother keeping spapr->fdt_blob update. Essentially, we considered maintaining the DT image the job of the guest after CAS. Specifically, every dynamic reconfiguration event (hotplug or unplug) alters the device tree. We generate an fdt fragment for the new device then stream that as an update to the guest using the PAPR specified interface (rtas_ibm_configure_connector). As noted we currently don't update qemu's global fdt image based on that. On hot unplug logically we need to revert those changes, which is actually pretty tricky, but currently the guest's job. Really, the trouble is that just dumping or viewing the dt is only simple in an "embedded" style environment where the fdt is generate then spit into the guest. In an actual open firmware environment like spapr, the DT is logically a dynamic thing maintained by firmware - but because "firmware"'s responsibility is split between SLOF and RTAS/qemu, keeping track of that is pretty nasty. For an environment like this, the flat tree format isn't really suited either - we'd want a dynamic representation of the tree. We get away with flat trees for now (barely) only because we mostly delegate the responsibility for managing the tree to SLOF and/or the OS kernel, both of which do use non-flat representations of the tree. > spapr->fdt_blob is left untouched for now. To replace it with > machine->fdt, since we're migrating spapr->fdt_blob, we would need to > migrate machine->fdt as well. This is something that we would like to to > do keep our code simpler but it's a work we'll do another day. > > Cc: Cédric Le Goater > Cc: qemu-...@nongnu.org > Signed-off-by: Daniel Henrique Barboza > --- > hw/ppc/spapr.c | 6 ++ > hw/ppc/spapr_hcall.c | 8 > 2 files changed, 14 insertions(+) > > diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c > index bc9ba6e6dc..7031cf964a 100644 > --- a/hw/ppc/spapr.c > +++ b/hw/ppc/spapr.c > @@ -1713,6 +1713,12 @@ static void spapr_machine_reset(MachineState *machine) > spapr->fdt_initial_size = spapr->fdt_size; > spapr->fdt_blob = fdt; > > +/* > + * Set the common machine->fdt pointer to enable support > + * for 'dumpdtb' and 'info fdt' QMP/HMP commands. > + */ > +machine->fdt = fdt; > + > /* Set up the entry state */ > first_ppc_cpu->env.gpr[5] = 0; > > diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c > index a8d4a6bcf0..a53bfd76f4 100644 > --- a/hw/ppc/spapr_hcall.c > +++ b/hw/ppc/spapr_hcall.c > @@ -1256,6 +1256,14 @@ target_ulong do_client_architecture_support(PowerPCCPU > *cpu, > spapr->fdt_initial_size = spapr->fdt_size; > spapr->fdt_blob = fdt; > > +/* > + * Set the machine->fdt pointer again since we just freed > + * it above (by freeing spapr->fdt_blob). We set this > + * pointer to enable support for 'dumpdtb' and 'info fdt' > + * QMP/HMP commands. > + */ > +MACHINE(spapr)->fdt = fdt; > + > return H_SUCCESS; > } > -- David Gibson| I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson signature.asc Description: PGP signature
[PATCH for-7.2 v3 10/20] hw/ppc: set machine->fdt in spapr machine
The pSeries machine never bothered with the common machine->fdt attribute. We do all the FDT related work using spapr->fdt_blob. We're going to introduce HMP commands to read and save the FDT, which will rely on setting machine->fdt properly to work across all machine archs/types. Let's set machine->fdt in the two places where we manipulate the FDT: spapr_machine_reset() and CAS. spapr->fdt_blob is left untouched for now. To replace it with machine->fdt, since we're migrating spapr->fdt_blob, we would need to migrate machine->fdt as well. This is something that we would like to to do keep our code simpler but it's a work we'll do another day. Cc: Cédric Le Goater Cc: qemu-...@nongnu.org Signed-off-by: Daniel Henrique Barboza --- hw/ppc/spapr.c | 6 ++ hw/ppc/spapr_hcall.c | 8 2 files changed, 14 insertions(+) diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c index bc9ba6e6dc..7031cf964a 100644 --- a/hw/ppc/spapr.c +++ b/hw/ppc/spapr.c @@ -1713,6 +1713,12 @@ static void spapr_machine_reset(MachineState *machine) spapr->fdt_initial_size = spapr->fdt_size; spapr->fdt_blob = fdt; +/* + * Set the common machine->fdt pointer to enable support + * for 'dumpdtb' and 'info fdt' QMP/HMP commands. + */ +machine->fdt = fdt; + /* Set up the entry state */ first_ppc_cpu->env.gpr[5] = 0; diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c index a8d4a6bcf0..a53bfd76f4 100644 --- a/hw/ppc/spapr_hcall.c +++ b/hw/ppc/spapr_hcall.c @@ -1256,6 +1256,14 @@ target_ulong do_client_architecture_support(PowerPCCPU *cpu, spapr->fdt_initial_size = spapr->fdt_size; spapr->fdt_blob = fdt; +/* + * Set the machine->fdt pointer again since we just freed + * it above (by freeing spapr->fdt_blob). We set this + * pointer to enable support for 'dumpdtb' and 'info fdt' + * QMP/HMP commands. + */ +MACHINE(spapr)->fdt = fdt; + return H_SUCCESS; } -- 2.37.2