Re: [PATCH 0/5] s390x: Add Full Boot Order Support
On 6/7/24 2:19 AM, Thomas Huth wrote: On 06/06/2024 21.22, Jared Rossi wrote: On 6/5/24 4:02 AM, Thomas Huth wrote: On 29/05/2024 17.43, jro...@linux.ibm.com wrote: From: Jared Rossi This patch set primarily adds support for the specification of multiple boot devices, allowing for the guest to automatically use an alternative device on a failed boot without needing to be reconfigured. It additionally provides the ability to define the loadparm attribute on a per-device bases, which allows boot devices to use different loadparm values if needed. In brief, an IPLB is generated for each designated boot device (up to a maximum of 8) and stored in guest memory immediately before BIOS. If a device fails to boot, the next IPLB is retrieved and we jump back to the start of BIOS. Devices can be specified using the standard qemu device tag "bootindex" as with other architectures. Lower number indices are tried first, with "bootindex=0" indicating the first device to try. Is this supposed with multiple scsi-hd devices, too? I tried to boot a guest with two scsi disks (attached to a single virtio-scsi-ccw adapter) where only the second disk had a bootable installation, but that failed...? Thomas Hi Thomas, Yes, I would expect that to work. I tried to reproduce this using a non-bootable scsi disk as the first boot device and then a known-good bootable scsi disk as the second boot device, with one controller. In my instance the BIOS was not able to identify the first disk as bootable and so that device failed to IPL, but it did move on to the next disk after that, and the guest successfully IPL'd from the second device. When you say it failed, do you mean the first disk failed to boot (as expected), but then the guest died without attempting to boot from the second disk? Or did something else happen? I am either not understanding your configuration or I am not understanding your error. I did this: $ ./qemu-system-s390x -bios pc-bios/s390-ccw/s390-ccw.img -accel kvm \ -device virtio-scsi-ccw -drive if=none,id=d2,file=/tmp/bad.qcow2 \ -device scsi-hd,drive=d2,bootindex=2 \ -drive if=none,id=d8,file=/tmp/good.qcow2 \ -device scsi-hd,drive=d8,bootindex=3 -m 4G -nographic LOADPARM=[ ] Using virtio-scsi. Using guessed DASD geometry. Using ECKD scheme (block size 512), CDL No zIPL section in IPL2 record. zIPL load failed. Trying next boot device... LOADPARM=[ ] Using virtio-scsi. Using guessed DASD geometry. Using ECKD scheme (block size 512), CDL No zIPL section in IPL2 record. zIPL load failed. So it claims to try to load from the second disk, but it fails. If I change the "bootindex=3" of the second disk to "bootindex=1", it boots perfectly fine, so I'm sure that the installation on good.qcow2 is working fine. Thomas I am able to reproduce this now; I'll investigate the problem.
Re: [PATCH 0/5] s390x: Add Full Boot Order Support
On 06/06/2024 21.22, Jared Rossi wrote: On 6/5/24 4:02 AM, Thomas Huth wrote: On 29/05/2024 17.43, jro...@linux.ibm.com wrote: From: Jared Rossi This patch set primarily adds support for the specification of multiple boot devices, allowing for the guest to automatically use an alternative device on a failed boot without needing to be reconfigured. It additionally provides the ability to define the loadparm attribute on a per-device bases, which allows boot devices to use different loadparm values if needed. In brief, an IPLB is generated for each designated boot device (up to a maximum of 8) and stored in guest memory immediately before BIOS. If a device fails to boot, the next IPLB is retrieved and we jump back to the start of BIOS. Devices can be specified using the standard qemu device tag "bootindex" as with other architectures. Lower number indices are tried first, with "bootindex=0" indicating the first device to try. Is this supposed with multiple scsi-hd devices, too? I tried to boot a guest with two scsi disks (attached to a single virtio-scsi-ccw adapter) where only the second disk had a bootable installation, but that failed...? Thomas Hi Thomas, Yes, I would expect that to work. I tried to reproduce this using a non-bootable scsi disk as the first boot device and then a known-good bootable scsi disk as the second boot device, with one controller. In my instance the BIOS was not able to identify the first disk as bootable and so that device failed to IPL, but it did move on to the next disk after that, and the guest successfully IPL'd from the second device. When you say it failed, do you mean the first disk failed to boot (as expected), but then the guest died without attempting to boot from the second disk? Or did something else happen? I am either not understanding your configuration or I am not understanding your error. I did this: $ ./qemu-system-s390x -bios pc-bios/s390-ccw/s390-ccw.img -accel kvm \ -device virtio-scsi-ccw -drive if=none,id=d2,file=/tmp/bad.qcow2 \ -device scsi-hd,drive=d2,bootindex=2 \ -drive if=none,id=d8,file=/tmp/good.qcow2 \ -device scsi-hd,drive=d8,bootindex=3 -m 4G -nographic LOADPARM=[] Using virtio-scsi. Using guessed DASD geometry. Using ECKD scheme (block size 512), CDL No zIPL section in IPL2 record. zIPL load failed. Trying next boot device... LOADPARM=[] Using virtio-scsi. Using guessed DASD geometry. Using ECKD scheme (block size 512), CDL No zIPL section in IPL2 record. zIPL load failed. So it claims to try to load from the second disk, but it fails. If I change the "bootindex=3" of the second disk to "bootindex=1", it boots perfectly fine, so I'm sure that the installation on good.qcow2 is working fine. Thomas
Re: [PATCH 0/5] s390x: Add Full Boot Order Support
On 6/5/24 4:02 AM, Thomas Huth wrote: On 29/05/2024 17.43, jro...@linux.ibm.com wrote: From: Jared Rossi This patch set primarily adds support for the specification of multiple boot devices, allowing for the guest to automatically use an alternative device on a failed boot without needing to be reconfigured. It additionally provides the ability to define the loadparm attribute on a per-device bases, which allows boot devices to use different loadparm values if needed. In brief, an IPLB is generated for each designated boot device (up to a maximum of 8) and stored in guest memory immediately before BIOS. If a device fails to boot, the next IPLB is retrieved and we jump back to the start of BIOS. Devices can be specified using the standard qemu device tag "bootindex" as with other architectures. Lower number indices are tried first, with "bootindex=0" indicating the first device to try. Is this supposed with multiple scsi-hd devices, too? I tried to boot a guest with two scsi disks (attached to a single virtio-scsi-ccw adapter) where only the second disk had a bootable installation, but that failed...? Thomas Hi Thomas, Yes, I would expect that to work. I tried to reproduce this using a non-bootable scsi disk as the first boot device and then a known-good bootable scsi disk as the second boot device, with one controller. In my instance the BIOS was not able to identify the first disk as bootable and so that device failed to IPL, but it did move on to the next disk after that, and the guest successfully IPL'd from the second device. When you say it failed, do you mean the first disk failed to boot (as expected), but then the guest died without attempting to boot from the second disk? Or did something else happen? I am either not understanding your configuration or I am not understanding your error. Regards, Jared Rossi
Re: [PATCH 0/5] s390x: Add Full Boot Order Support
On 29/05/2024 17.43, jro...@linux.ibm.com wrote: From: Jared Rossi This patch set primarily adds support for the specification of multiple boot devices, allowing for the guest to automatically use an alternative device on a failed boot without needing to be reconfigured. It additionally provides the ability to define the loadparm attribute on a per-device bases, which allows boot devices to use different loadparm values if needed. In brief, an IPLB is generated for each designated boot device (up to a maximum of 8) and stored in guest memory immediately before BIOS. If a device fails to boot, the next IPLB is retrieved and we jump back to the start of BIOS. Devices can be specified using the standard qemu device tag "bootindex" as with other architectures. Lower number indices are tried first, with "bootindex=0" indicating the first device to try. Is this supposed with multiple scsi-hd devices, too? I tried to boot a guest with two scsi disks (attached to a single virtio-scsi-ccw adapter) where only the second disk had a bootable installation, but that failed...? Thomas
Re: [PATCH 0/5] s390x: Add Full Boot Order Support
On 29/05/2024 17.43, jro...@linux.ibm.com wrote: From: Jared Rossi This patch set primarily adds support for the specification of multiple boot devices, allowing for the guest to automatically use an alternative device on a failed boot without needing to be reconfigured. It additionally provides the ability to define the loadparm attribute on a per-device bases, which allows boot devices to use different loadparm values if needed. In brief, an IPLB is generated for each designated boot device (up to a maximum of 8) and stored in guest memory immediately before BIOS. If a device fails to boot, the next IPLB is retrieved and we jump back to the start of BIOS. Devices can be specified using the standard qemu device tag "bootindex" as with other architectures. Lower number indices are tried first, with "bootindex=0" indicating the first device to try. A subsequent Libvirt patch will be necessary to allow assignment of per-device loadparms in the guest XML Jared Rossi (5): Create include files for s390x IPL definitions Add loadparm to CcwDevice Build IPLB chain for multiple boot devices Add boot device fallback infrastructure Enable and document boot device fallback on panic docs/system/bootindex.rst | 7 +- docs/system/s390x/bootdevices.rst | 9 +- hw/s390x/ccw-device.h | 2 + hw/s390x/ipl.h| 117 +--- include/hw/s390x/ipl/qipl.h | 128 ++ pc-bios/s390-ccw/bootmap.h| 5 + pc-bios/s390-ccw/iplb.h | 108 +-- pc-bios/s390-ccw/s390-ccw.h | 6 ++ hw/s390x/ccw-device.c | 49 + hw/s390x/ipl.c| 170 ++ hw/s390x/s390-virtio-ccw.c| 18 +--- hw/s390x/sclp.c | 3 +- pc-bios/s390-ccw/bootmap.c| 41 --- pc-bios/s390-ccw/main.c | 25 +++-- pc-bios/s390-ccw/netmain.c| 4 + pc-bios/s390-ccw/Makefile | 2 +- Hi Jared! For v2, could you please add at least two tests: one that check booting from the second disk and one that checks booting from the last boot disk when the previous ones are invalid? I could think of two easy ways for adding such tests, up to you what you prefer: - Extend the tests/qtest/cdrom-test.c - see add_s390x_tests() there - Add an avocado test - see "grep -l s390 tests/avocado/*.py" for examples. Thomas
