Mark Cave-Ayland, le lun. 26 oct. 2020 08:33:59 +0000, a ecrit:
> Also implement the behaviour reported in Linux's ftdi_sio.c whereby if an
> invalid
> data_bits value is provided then the hardware defaults to using 8.
>
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thiba...@ens-lyon.org>
> ---
> hw/usb/dev-serial.c | 17 +++++++++++++++++
> hw/usb/trace-events | 1 +
> 2 files changed, 18 insertions(+)
>
> diff --git a/hw/usb/dev-serial.c b/hw/usb/dev-serial.c
> index 919e25e1d9..4c374d0790 100644
> --- a/hw/usb/dev-serial.c
> +++ b/hw/usb/dev-serial.c
> @@ -308,6 +308,23 @@ static void usb_serial_handle_control(USBDevice *dev,
> USBPacket *p,
> break;
> }
> case VendorDeviceOutRequest | FTDI_SET_DATA:
> + switch (value & 0xff) {
> + case 7:
> + s->params.data_bits = 7;
> + break;
> + case 8:
> + s->params.data_bits = 8;
> + break;
> + default:
> + /*
> + * According to a comment in Linux's ftdi_sio.c original FTDI
> + * chips fall back to 8 data bits for unsupported data_bits
> + */
> + trace_usb_serial_unsupported_data_bits(bus->busnr, dev->addr,
> + value & 0xff);
> + s->params.data_bits = 8;
> + }
> +
> switch (value & FTDI_PARITY) {
> case 0:
> s->params.parity = 'N';
> diff --git a/hw/usb/trace-events b/hw/usb/trace-events
> index 9e984b2e0c..0d0a3e5f2a 100644
> --- a/hw/usb/trace-events
> +++ b/hw/usb/trace-events
> @@ -327,6 +327,7 @@ usb_serial_handle_control(int bus, int addr, int request,
> int value) "dev %d:%d
> usb_serial_unsupported_parity(int bus, int addr, int value) "dev %d:%d
> unsupported parity %d"
> usb_serial_unsupported_stopbits(int bus, int addr, int value) "dev %d:%d
> unsupported stop bits %d"
> usb_serial_unsupported_control(int bus, int addr, int request, int value)
> "dev %d:%d got unsupported/bogus control 0x%x, value 0x%x"
> +usb_serial_unsupported_data_bits(int bus, int addr, int value) "dev %d:%d
> unsupported data bits %d, falling back to 8"
> usb_serial_bad_token(int bus, int addr) "dev %d:%d bad token"
> usb_serial_set_baud(int bus, int addr, int baud) "dev %d:%d baud rate %d"
> usb_serial_set_data(int bus, int addr, int parity, int data, int stop) "dev
> %d:%d parity %c, data bits %d, stop bits %d"
> --
> 2.20.1
>
--
Samuel
> Il [e2fsck] a bien démarré, mais il m'a rendu la main aussitot en me
> disant "houlala, c'est pas beau à voir votre truc, je préfèrerai que
> vous teniez vous même la tronçonneuse" (traduction libre)
NC in Guide du linuxien pervers : "Bien configurer sa tronçonneuse."
