Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
"Dr. David Alan Gilbert" writes: > * Don Slutz (dsl...@verizon.com) wrote: >> On 11/21/14 05:49, Dr. David Alan Gilbert wrote: >> >* Markus Armbruster (arm...@redhat.com) wrote: [...] >> >>Management tools should use -nodefaults. But if it mixes default and >> >>-nodefaults in migration, recreating the stuff it got by default but >> >>doesn't get with -nodefaults is its own responsibility. >> >> Yes. Since xen did not ask for a CD-ROM, it did not expect to need to create >> it. xen was "fixed" to use -nodefaults. >> >> >Well, mostly - we wouldn't expect a migration to work if the source/dest >> >didn't match exactly; but QEMU shouldn't seg. >> >> Well, this change prevents a seg. So you are in favor of having this >> backported? > > Yes. I gladly defer to Dave's judgement here.
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
* Don Slutz (dsl...@verizon.com) wrote:
> On 11/21/14 05:49, Dr. David Alan Gilbert wrote:
> >* Markus Armbruster (arm...@redhat.com) wrote:
> >>Don Slutz writes:
> >>
> >>>On 11/19/14 07:29, Markus Armbruster wrote:
> Don Slutz writes:
>
> >The other callers to blk_set_enable_write_cache() in this file
> >already check for s->blk == NULL.
> >
> >Signed-off-by: Don Slutz
> >---
> >
> >I think this is a bugfix that should be back ported to stable
> >releases.
> >
> >I also think this should be done in xen's copy of QEMU for 4.5 with
> >back port(s) to active stable releases.
> >
> >Note: In 2.1 and earlier the routine is
> >bdrv_set_enable_write_cache(); variable is s->bs.
> Got a reproducer?
> >>>yes. Migrating a guest from xen 4.2 or 4.3 to xen 4.4 (or 4.5-unstable) on
> >>>CentOS 6.3 with xen_emul_unplug=unnecessary and no cdrom defined.
> >>>
> >>>
> I'm asking because I believe s->identify_set implies s->blk.
> s->identify_set is initialized to zero, and gets set to non-zero exactly
> on the first successful IDENTIFY DEVICE or IDENTIFY PACKET DEVICE, in
> ide_identify(), ide_atapi_identify() or ide_cfata_identify(),
> respectively. Only called via cmd_identify() / cmd_identify_packet()
> via ide_exec_cmd(). The latter immediately fails when !s->blk:
>
> s = idebus_active_if(bus);
> /* ignore commands to non existent slave */
> if (s != bus->ifs && !s->blk) {
> return;
> }
> >>>I do think that you are right. I have now spent more time on why I am
> >>>seeing this.
> >>>
> >>>
> Even if I'm right, your patch is fine, because it makes this spot more
> obviously correct, and consistent with the other uses of
> blk_set_enable_write_cache(). The case for stable is weak, though.
>
> >>>I had not fully tracked down what is happening before sending the bugfix.
> >>>I have now done more debugging, and have tracked it down to xen 4.4
> >>>now using "-nodefaults" with QEMU.
> >>>
> >>>I needed to add output to QEMU to track this down because I have long
> >>>command lines...
> >>>
> >>>(all I get for ps -ef):
> >>[...]
> >>>Which is missing that option.
> >>>
> >>>The ide that was aborting in this case is the cdrom at hdc that is added
> >>>if you do not specify "-nodefaults".
> >>>
> >>>Since this is a "changed" machine config, I am no longer as sure as what
> >>>versions this needs to be in.
> >>>
> >>>If I put my QEMU hat on, it does not look like a back port is needed.
> >>>However
> >>>for xen it would be nice.
> >>>
> >>>I do not know how the QEMU community feels about migration from a config
> >>>without "-nodefaults" to one with "-nodefaults" as the only difference.
> >>So you have a CD-ROM on the source, but not on the destination?
>
> Yes, QEMU in the source has an empty CD-ROM, but not on the destination.
> xen
> does not know that QEMU added a CD-ROM drive in hdc by default.
>
> >>That can't work. I guess it broke for you in an unusual way (target
> >>crashes) rather than the usual way (target rejects migration data for a
> >>device it doesn't have) due to our convoluted IDE data structures. With
> >>your patch applied it should break the usual way. Does it?
>
> Nope. It does not break at all. The migration "works". The target accepts
> the hdc data.
> It looks like to me that all 4 IDE state data is sent.
>
>
> >>Management tools should use -nodefaults. But if it mixes default and
> >>-nodefaults in migration, recreating the stuff it got by default but
> >>doesn't get with -nodefaults is its own responsibility.
>
> Yes. Since xen did not ask for a CD-ROM, it did not expect to need to create
> it. xen was "fixed" to use -nodefaults.
>
> >Well, mostly - we wouldn't expect a migration to work if the source/dest
> >didn't match exactly; but QEMU shouldn't seg.
>
> Well, this change prevents a seg. So you are in favor of having this
> backported?
Yes.
Dave
>
>
>-Don Slutz
>
> >Dave
> >
> >--
> >Dr. David Alan Gilbert /dgilb...@redhat.com / Manchester, UK
>
--
Dr. David Alan Gilbert / dgilb...@redhat.com / Manchester, UK
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
On 11/21/14 05:49, Dr. David Alan Gilbert wrote:
* Markus Armbruster (arm...@redhat.com) wrote:
Don Slutz writes:
On 11/19/14 07:29, Markus Armbruster wrote:
Don Slutz writes:
The other callers to blk_set_enable_write_cache() in this file
already check for s->blk == NULL.
Signed-off-by: Don Slutz
---
I think this is a bugfix that should be back ported to stable
releases.
I also think this should be done in xen's copy of QEMU for 4.5 with
back port(s) to active stable releases.
Note: In 2.1 and earlier the routine is
bdrv_set_enable_write_cache(); variable is s->bs.
Got a reproducer?
yes. Migrating a guest from xen 4.2 or 4.3 to xen 4.4 (or 4.5-unstable) on
CentOS 6.3 with xen_emul_unplug=unnecessary and no cdrom defined.
I'm asking because I believe s->identify_set implies s->blk.
s->identify_set is initialized to zero, and gets set to non-zero exactly
on the first successful IDENTIFY DEVICE or IDENTIFY PACKET DEVICE, in
ide_identify(), ide_atapi_identify() or ide_cfata_identify(),
respectively. Only called via cmd_identify() / cmd_identify_packet()
via ide_exec_cmd(). The latter immediately fails when !s->blk:
s = idebus_active_if(bus);
/* ignore commands to non existent slave */
if (s != bus->ifs && !s->blk) {
return;
}
I do think that you are right. I have now spent more time on why I am
seeing this.
Even if I'm right, your patch is fine, because it makes this spot more
obviously correct, and consistent with the other uses of
blk_set_enable_write_cache(). The case for stable is weak, though.
I had not fully tracked down what is happening before sending the bugfix.
I have now done more debugging, and have tracked it down to xen 4.4
now using "-nodefaults" with QEMU.
I needed to add output to QEMU to track this down because I have long
command lines...
(all I get for ps -ef):
[...]
Which is missing that option.
The ide that was aborting in this case is the cdrom at hdc that is added
if you do not specify "-nodefaults".
Since this is a "changed" machine config, I am no longer as sure as what
versions this needs to be in.
If I put my QEMU hat on, it does not look like a back port is needed.
However
for xen it would be nice.
I do not know how the QEMU community feels about migration from a config
without "-nodefaults" to one with "-nodefaults" as the only difference.
So you have a CD-ROM on the source, but not on the destination?
Yes, QEMU in the source has an empty CD-ROM, but not on the
destination. xen
does not know that QEMU added a CD-ROM drive in hdc by default.
That can't work. I guess it broke for you in an unusual way (target
crashes) rather than the usual way (target rejects migration data for a
device it doesn't have) due to our convoluted IDE data structures. With
your patch applied it should break the usual way. Does it?
Nope. It does not break at all. The migration "works". The target
accepts the hdc data.
It looks like to me that all 4 IDE state data is sent.
Management tools should use -nodefaults. But if it mixes default and
-nodefaults in migration, recreating the stuff it got by default but
doesn't get with -nodefaults is its own responsibility.
Yes. Since xen did not ask for a CD-ROM, it did not expect to need to create
it. xen was "fixed" to use -nodefaults.
Well, mostly - we wouldn't expect a migration to work if the source/dest
didn't match exactly; but QEMU shouldn't seg.
Well, this change prevents a seg. So you are in favor of having this
backported?
-Don Slutz
Dave
--
Dr. David Alan Gilbert /dgilb...@redhat.com / Manchester, UK
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
* Markus Armbruster (arm...@redhat.com) wrote:
> Don Slutz writes:
>
> > On 11/19/14 07:29, Markus Armbruster wrote:
> >> Don Slutz writes:
> >>
> >>> The other callers to blk_set_enable_write_cache() in this file
> >>> already check for s->blk == NULL.
> >>>
> >>> Signed-off-by: Don Slutz
> >>> ---
> >>>
> >>> I think this is a bugfix that should be back ported to stable
> >>> releases.
> >>>
> >>> I also think this should be done in xen's copy of QEMU for 4.5 with
> >>> back port(s) to active stable releases.
> >>>
> >>> Note: In 2.1 and earlier the routine is
> >>> bdrv_set_enable_write_cache(); variable is s->bs.
> >> Got a reproducer?
> >
> > yes. Migrating a guest from xen 4.2 or 4.3 to xen 4.4 (or 4.5-unstable) on
> > CentOS 6.3 with xen_emul_unplug=unnecessary and no cdrom defined.
> >
> >
> >>
> >> I'm asking because I believe s->identify_set implies s->blk.
> >> s->identify_set is initialized to zero, and gets set to non-zero exactly
> >> on the first successful IDENTIFY DEVICE or IDENTIFY PACKET DEVICE, in
> >> ide_identify(), ide_atapi_identify() or ide_cfata_identify(),
> >> respectively. Only called via cmd_identify() / cmd_identify_packet()
> >> via ide_exec_cmd(). The latter immediately fails when !s->blk:
> >>
> >> s = idebus_active_if(bus);
> >> /* ignore commands to non existent slave */
> >> if (s != bus->ifs && !s->blk) {
> >> return;
> >> }
> >
> > I do think that you are right. I have now spent more time on why I am
> > seeing this.
> >
> >
> >> Even if I'm right, your patch is fine, because it makes this spot more
> >> obviously correct, and consistent with the other uses of
> >> blk_set_enable_write_cache(). The case for stable is weak, though.
> >>
> >
> > I had not fully tracked down what is happening before sending the bugfix.
> > I have now done more debugging, and have tracked it down to xen 4.4
> > now using "-nodefaults" with QEMU.
> >
> > I needed to add output to QEMU to track this down because I have long
> > command lines...
> >
> > (all I get for ps -ef):
> [...]
> >
> >
> > Which is missing that option.
> >
> > The ide that was aborting in this case is the cdrom at hdc that is added
> > if you do not specify "-nodefaults".
> >
> > Since this is a "changed" machine config, I am no longer as sure as what
> > versions this needs to be in.
> >
> > If I put my QEMU hat on, it does not look like a back port is needed.
> > However
> > for xen it would be nice.
> >
> > I do not know how the QEMU community feels about migration from a config
> > without "-nodefaults" to one with "-nodefaults" as the only difference.
>
> So you have a CD-ROM on the source, but not on the destination?
>
> That can't work. I guess it broke for you in an unusual way (target
> crashes) rather than the usual way (target rejects migration data for a
> device it doesn't have) due to our convoluted IDE data structures. With
> your patch applied it should break the usual way. Does it?
>
> Management tools should use -nodefaults. But if it mixes default and
> -nodefaults in migration, recreating the stuff it got by default but
> doesn't get with -nodefaults is its own responsibility.
Well, mostly - we wouldn't expect a migration to work if the source/dest
didn't match exactly; but QEMU shouldn't seg.
Dave
--
Dr. David Alan Gilbert / dgilb...@redhat.com / Manchester, UK
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
Don Slutz writes:
> On 11/19/14 07:29, Markus Armbruster wrote:
>> Don Slutz writes:
>>
>>> The other callers to blk_set_enable_write_cache() in this file
>>> already check for s->blk == NULL.
>>>
>>> Signed-off-by: Don Slutz
>>> ---
>>>
>>> I think this is a bugfix that should be back ported to stable
>>> releases.
>>>
>>> I also think this should be done in xen's copy of QEMU for 4.5 with
>>> back port(s) to active stable releases.
>>>
>>> Note: In 2.1 and earlier the routine is
>>> bdrv_set_enable_write_cache(); variable is s->bs.
>> Got a reproducer?
>
> yes. Migrating a guest from xen 4.2 or 4.3 to xen 4.4 (or 4.5-unstable) on
> CentOS 6.3 with xen_emul_unplug=unnecessary and no cdrom defined.
>
>
>>
>> I'm asking because I believe s->identify_set implies s->blk.
>> s->identify_set is initialized to zero, and gets set to non-zero exactly
>> on the first successful IDENTIFY DEVICE or IDENTIFY PACKET DEVICE, in
>> ide_identify(), ide_atapi_identify() or ide_cfata_identify(),
>> respectively. Only called via cmd_identify() / cmd_identify_packet()
>> via ide_exec_cmd(). The latter immediately fails when !s->blk:
>>
>> s = idebus_active_if(bus);
>> /* ignore commands to non existent slave */
>> if (s != bus->ifs && !s->blk) {
>> return;
>> }
>
> I do think that you are right. I have now spent more time on why I am
> seeing this.
>
>
>> Even if I'm right, your patch is fine, because it makes this spot more
>> obviously correct, and consistent with the other uses of
>> blk_set_enable_write_cache(). The case for stable is weak, though.
>>
>
> I had not fully tracked down what is happening before sending the bugfix.
> I have now done more debugging, and have tracked it down to xen 4.4
> now using "-nodefaults" with QEMU.
>
> I needed to add output to QEMU to track this down because I have long
> command lines...
>
> (all I get for ps -ef):
[...]
>
>
> Which is missing that option.
>
> The ide that was aborting in this case is the cdrom at hdc that is added
> if you do not specify "-nodefaults".
>
> Since this is a "changed" machine config, I am no longer as sure as what
> versions this needs to be in.
>
> If I put my QEMU hat on, it does not look like a back port is needed.
> However
> for xen it would be nice.
>
> I do not know how the QEMU community feels about migration from a config
> without "-nodefaults" to one with "-nodefaults" as the only difference.
So you have a CD-ROM on the source, but not on the destination?
That can't work. I guess it broke for you in an unusual way (target
crashes) rather than the usual way (target rejects migration data for a
device it doesn't have) due to our convoluted IDE data structures. With
your patch applied it should break the usual way. Does it?
Management tools should use -nodefaults. But if it mixes default and
-nodefaults in migration, recreating the stuff it got by default but
doesn't get with -nodefaults is its own responsibility.
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
On 11/19/14 07:29, Markus Armbruster wrote:
Don Slutz writes:
The other callers to blk_set_enable_write_cache() in this file
already check for s->blk == NULL.
Signed-off-by: Don Slutz
---
I think this is a bugfix that should be back ported to stable
releases.
I also think this should be done in xen's copy of QEMU for 4.5 with
back port(s) to active stable releases.
Note: In 2.1 and earlier the routine is
bdrv_set_enable_write_cache(); variable is s->bs.
Got a reproducer?
yes. Migrating a guest from xen 4.2 or 4.3 to xen 4.4 (or 4.5-unstable) on
CentOS 6.3 with xen_emul_unplug=unnecessary and no cdrom defined.
I'm asking because I believe s->identify_set implies s->blk.
s->identify_set is initialized to zero, and gets set to non-zero exactly
on the first successful IDENTIFY DEVICE or IDENTIFY PACKET DEVICE, in
ide_identify(), ide_atapi_identify() or ide_cfata_identify(),
respectively. Only called via cmd_identify() / cmd_identify_packet()
via ide_exec_cmd(). The latter immediately fails when !s->blk:
s = idebus_active_if(bus);
/* ignore commands to non existent slave */
if (s != bus->ifs && !s->blk) {
return;
}
I do think that you are right. I have now spent more time on why I am
seeing this.
Even if I'm right, your patch is fine, because it makes this spot more
obviously correct, and consistent with the other uses of
blk_set_enable_write_cache(). The case for stable is weak, though.
I had not fully tracked down what is happening before sending the bugfix.
I have now done more debugging, and have tracked it down to xen 4.4
now using "-nodefaults" with QEMU.
I needed to add output to QEMU to track this down because I have long
command lines...
(all I get for ps -ef):
root 14864 1 82 16:42 ?00:00:09
/usr/lib/xen/bin/qemu-system-i386 -xen-domid 20 -chardev
socket,id=libxl-cmd,path=/var/run/xen/qmp-libxl-20,server,nowait -mon
chardev=libxl-cmd,mode=control -name C63-min-tools -machine
xenfv,vmware_hw=7,xen_platform_pci=240 -hostbridge 82443 -device
agp-bridge,id=agp,msi=off,msi-x=off,addr=0x12.0 -monitor pty -monitor vc
-boot menu=on -device
vmware-pci-bridge,msi=on,msi-x=on,id=pciBridge1.0,addr=0x11.0 -device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.0,multifunction=on,addr=0x15.0
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.1,multifunction=on,addr=0x15.1
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.2,multifunction=on,addr=0x15.2
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.3,multifunction=on,addr=0x15.3
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.4,multifunction=on,addr=0x15.4
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.5,multifunction=on,addr=0x15.5
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.6,multifunction=on,addr=0x15.6
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge5.7,multifunction=on,addr=0x15.7
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.0,multifunction=on,addr=0x16.0
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.1,multifunction=on,addr=0x16.1
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.2,multifunction=on,addr=0x16.2
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.3,multifunction=on,addr=0x16.3
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.4,multifunction=on,addr=0x16.4
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.5,multifunction=on,addr=0x16.5
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.6,multifunction=on,addr=0x16.6
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge6.7,multifunction=on,addr=0x16.7
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.0,multifunction=on,addr=0x17.0
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.1,multifunction=on,addr=0x17.1
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.2,multifunction=on,addr=0x17.2
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.3,multifunction=on,addr=0x17.3
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.4,multifunction=on,addr=0x17.4
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.5,multifunction=on,addr=0x17.5
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.6,multifunction=on,addr=0x17.6
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge7.7,multifunction=on,addr=0x17.7
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge8.0,multifunction=on,addr=0x18.0
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge8.1,multifunction=on,addr=0x18.1
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge8.2,multifunction=on,addr=0x18.2
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge8.3,multifunction=on,addr=0x18.3
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge8.4,multifunction=on,addr=0x18.4
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge8.5,multifunction=on,addr=0x18.5
-device
vmware-pcie-bridge,msi=on,msi-x=on,id=pciBridge8.6,multifunction=on,ad
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
Don Slutz writes:
> The other callers to blk_set_enable_write_cache() in this file
> already check for s->blk == NULL.
>
> Signed-off-by: Don Slutz
> ---
>
> I think this is a bugfix that should be back ported to stable
> releases.
>
> I also think this should be done in xen's copy of QEMU for 4.5 with
> back port(s) to active stable releases.
>
> Note: In 2.1 and earlier the routine is
> bdrv_set_enable_write_cache(); variable is s->bs.
Got a reproducer?
I'm asking because I believe s->identify_set implies s->blk.
s->identify_set is initialized to zero, and gets set to non-zero exactly
on the first successful IDENTIFY DEVICE or IDENTIFY PACKET DEVICE, in
ide_identify(), ide_atapi_identify() or ide_cfata_identify(),
respectively. Only called via cmd_identify() / cmd_identify_packet()
via ide_exec_cmd(). The latter immediately fails when !s->blk:
s = idebus_active_if(bus);
/* ignore commands to non existent slave */
if (s != bus->ifs && !s->blk) {
return;
}
Even if I'm right, your patch is fine, because it makes this spot more
obviously correct, and consistent with the other uses of
blk_set_enable_write_cache(). The case for stable is weak, though.
>
> hw/ide/core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/ide/core.c b/hw/ide/core.c
> index 00e21cf..d4af5e2 100644
> --- a/hw/ide/core.c
> +++ b/hw/ide/core.c
> @@ -2401,7 +2401,7 @@ static int ide_drive_post_load(void *opaque, int
> version_id)
> {
> IDEState *s = opaque;
>
> -if (s->identify_set) {
> +if (s->blk && s->identify_set) {
> blk_set_enable_write_cache(s->blk, !!(s->identify_data[85] & (1 <<
> 5)));
> }
> return 0;
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
On 18 November 2014 11:41, Kevin Wolf wrote: > Am 17.11.2014 um 22:20 hat Don Slutz geschrieben: >> The other callers to blk_set_enable_write_cache() in this file >> already check for s->blk == NULL. >> >> Signed-off-by: Don Slutz >> --- >> >> I think this is a bugfix that should be back ported to stable >> releases. > > Please remember to include a 'Cc: qemu-sta...@nongnu.org' line in your > commit messages for such patches. I've added it and applied the patch to > my block branch, thanks. (Saw it too late for my -rc2 pull request, > though, so it'll have to wait for -rc3.) Now applied directly to master so it will make -rc2. thanks -- PMM
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
Konrad,
I think we should have this fix in Xen 4.5. Should I go ahead and
backport it?
On Mon, 17 Nov 2014, Don Slutz wrote:
> The other callers to blk_set_enable_write_cache() in this file
> already check for s->blk == NULL.
>
> Signed-off-by: Don Slutz
> ---
>
> I think this is a bugfix that should be back ported to stable
> releases.
>
> I also think this should be done in xen's copy of QEMU for 4.5 with
> back port(s) to active stable releases.
>
> Note: In 2.1 and earlier the routine is
> bdrv_set_enable_write_cache(); variable is s->bs.
>
> hw/ide/core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/ide/core.c b/hw/ide/core.c
> index 00e21cf..d4af5e2 100644
> --- a/hw/ide/core.c
> +++ b/hw/ide/core.c
> @@ -2401,7 +2401,7 @@ static int ide_drive_post_load(void *opaque, int
> version_id)
> {
> IDEState *s = opaque;
>
> -if (s->identify_set) {
> +if (s->blk && s->identify_set) {
> blk_set_enable_write_cache(s->blk, !!(s->identify_data[85] & (1 <<
> 5)));
> }
> return 0;
> --
> 1.8.4
>
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
Am 17.11.2014 um 22:20 hat Don Slutz geschrieben: > The other callers to blk_set_enable_write_cache() in this file > already check for s->blk == NULL. > > Signed-off-by: Don Slutz > --- > > I think this is a bugfix that should be back ported to stable > releases. Please remember to include a 'Cc: qemu-sta...@nongnu.org' line in your commit messages for such patches. I've added it and applied the patch to my block branch, thanks. (Saw it too late for my -rc2 pull request, though, so it'll have to wait for -rc3.) Kevin
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
On Mon, Nov 17, 2014 at 04:20:39PM -0500, Don Slutz wrote: > The other callers to blk_set_enable_write_cache() in this file > already check for s->blk == NULL. > > Signed-off-by: Don Slutz > --- > > I think this is a bugfix that should be back ported to stable > releases. > > I also think this should be done in xen's copy of QEMU for 4.5 with > back port(s) to active stable releases. > > Note: In 2.1 and earlier the routine is > bdrv_set_enable_write_cache(); variable is s->bs. > > hw/ide/core.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Reviewed-by: Stefan Hajnoczi pgp82QmAe9sMB.pgp Description: PGP signature
Re: [Qemu-devel] [BUGFIX][PATCH for 2.2 1/1] hw/ide/core.c: Prevent SIGSEGV during migration
On 17/11/2014 22:20, Don Slutz wrote:
> The other callers to blk_set_enable_write_cache() in this file
> already check for s->blk == NULL.
>
> Signed-off-by: Don Slutz
> ---
>
> I think this is a bugfix that should be back ported to stable
> releases.
>
> I also think this should be done in xen's copy of QEMU for 4.5 with
> back port(s) to active stable releases.
>
> Note: In 2.1 and earlier the routine is
> bdrv_set_enable_write_cache(); variable is s->bs.
>
> hw/ide/core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/hw/ide/core.c b/hw/ide/core.c
> index 00e21cf..d4af5e2 100644
> --- a/hw/ide/core.c
> +++ b/hw/ide/core.c
> @@ -2401,7 +2401,7 @@ static int ide_drive_post_load(void *opaque, int
> version_id)
> {
> IDEState *s = opaque;
>
> -if (s->identify_set) {
> +if (s->blk && s->identify_set) {
> blk_set_enable_write_cache(s->blk, !!(s->identify_data[85] & (1 <<
> 5)));
> }
> return 0;
>
Reviewed-by: Paolo Bonzini
