Re: [Qgis-user] Fwd: Importing Mapinfo Layers
If I had Mapinfo that would've been a good solution Thanks all the same Noli. On 5/08/2010 10:38 AM, Noli Sicad wrote: Brett, Try opening these files in MapInfo and then saving them with different names, then open again in QGIS. I just did this process (above) in MapInfo 8.5 and it works. I could open the new file in QGIS. Noli On 8/5/10, Noli Sicad wrote: Brett, It is not working in Qgis 1.5 windows xp as well. However, I have no problem with my MapInfo files. Try opening these files in MapInfo and then saving them with different names, then open again QGIS. Noli On 8/5/10, Brett Adams wrote: Hi Folks, Having some issues importing certain MapInfo layers. I've attached the file in question if that helps. Realise I can simply import the txt file, but I have hundreds of these files so I'm not keen on that idea. Currently running Version 1.4.0 Thanks in advance -- Brett Adams Spinifex Geophysics 0438 861 974 SKYPE:brettadams_spinifex -- Brett Adams Spinifex Geophysics 0438 861 974 SKYPE:brettadams_spinifex ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Fwd: Importing Mapinfo Layers
Brett, Try opening these files in MapInfo and then saving them with different names, then open again in QGIS. I just did this process (above) in MapInfo 8.5 and it works. I could open the new file in QGIS. Noli On 8/5/10, Noli Sicad wrote: > Brett, > > It is not working in Qgis 1.5 windows xp as well. > > However, I have no problem with my MapInfo files. > > Try opening these files in MapInfo and then saving them with different > names, then open again QGIS. > > Noli > > On 8/5/10, Brett Adams wrote: >> Hi Folks, >> >> Having some issues importing certain MapInfo layers. I've attached the >> file in question if that helps. >> >> Realise I can simply import the txt file, but I have hundreds of these >> files so I'm not keen on that idea. >> >> Currently running Version 1.4.0 >> >> Thanks in advance >> >> -- >> Brett Adams >> Spinifex Geophysics >> 0438 861 974 >> SKYPE:brettadams_spinifex >> >> >> >> > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Fwd: Importing Mapinfo Layers
Brett, It is not working in Qgis 1.5 windows xp as well. However, I have no problem with my MapInfo files. Try opening these files in MapInfo and then saving them with different names, then open again QGIS. Noli On 8/5/10, Brett Adams wrote: > Hi Folks, > > Having some issues importing certain MapInfo layers. I've attached the > file in question if that helps. > > Realise I can simply import the txt file, but I have hundreds of these > files so I'm not keen on that idea. > > Currently running Version 1.4.0 > > Thanks in advance > > -- > Brett Adams > Spinifex Geophysics > 0438 861 974 > SKYPE:brettadams_spinifex > > > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: Res: [Qgis-user] management tables
Dnia środa 04 sierpnia 2010 o 16:05:07 Giovanni Manghi napisał(a): > Hi Dario, > > please keep the conversation on-list, it can be useful to others. > > On Wed, 2010-08-04 at 07:00 -0700, Dario wrote: > > mean the following: > > > > a field where you can insert a hyperlink to a picture or pdf or doc. > > > > For example, to view a photo of a building. > > > > Just as is done in gvSIG or KOSMOS > > try the edit widgets, especially the "file name" one. You find the > widgets in the vector properties, attributes panel. You can be also interested in setting an action on desired field. The action could e.g. call image or pdf browser. Look in layer properties. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Re: Installing QGIS 1.5 on Debian Squeeze
Niccolo, A further update. Immediately after sending the previous mail I realised that the installed version was not Tethys. It seems that the Lenny & Squeeze repositories on http://debian.gfoss.it/ are not synchronised. I cannot select the Lenny repository with a standard sources.list file as Synaptic gives preference to the version 1.4.0 in the Debian Squeeze repository. So I temporarily disabled the Debian repository in the sources.list file and enabled the gfossit repository as follows: #deb ftp://ftp.is.co.za/debian testing main contrib non-free #deb http://security.debian.org testing/updates main contrib non-free deb http://debian.gfoss.it/ lenny main I purged the prior qgis installation and reinstalled. Now it is Tethys again. I still have the crash that I reported yesterday at the same point of loading but it is now *not a segmentation fault *- see below: AspireOne:/home/gary# qgis Warning: Qt: Session management error: None of the authentication protocols specified are supported AspireOne:/home/gary# Regards Gary On 04/08/2010 12:22, Niccolo Rigacci wrote: On Tue, Aug 03, 2010 at 07:25:01PM +0200, Gary Smith wrote: Nicollo, I get a segmentation fault. This occurs immediately the "Starting Python" message is displayed on the Splash screen. Also, there also appears to be a dependency problem with the grass plugin. Check all the old packages/libraries you have installed and remove them manually: dpk --list | grep qgis dpkg --purge... Then re-do the apt-get install. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Re: Installing QGIS 1.5 on Debian Squeeze
Niccolo, My previous mail describes the error reported as: AspireOne:/home/gary# qgis Warning: Qt: Session management error: *None of the authentication protocols specified are supported* AspireOne:/home/gary# As you may have noticed that this is run as su. When I run as normal user I still get the original segmentation fault. g...@aspireone:~$ qgis *Segmentation fault* g...@aspireone:~$ I hope that this information is helpful. Rgds Gary On 04/08/2010 20:35, Gary Smith wrote: Niccolo, A further update. Immediately after sending the previous mail I realised that the installed version was not Tethys. It seems that the Lenny & Squeeze repositories on http://debian.gfoss.it/ are not synchronised. I cannot select the Lenny repository with a standard sources.list file as Synaptic gives preference to the version 1.4.0 in the Debian Squeeze repository. So I temporarily disabled the Debian repository in the sources.list file and enabled the gfossit repository as follows: #deb ftp://ftp.is.co.za/debian testing main contrib non-free #deb http://security.debian.org testing/updates main contrib non-free deb http://debian.gfoss.it/ lenny main I purged the prior qgis installation and reinstalled. Now it is Tethys again. I still have the crash that I reported yesterday at the same point of loading but it is now *not a segmentation fault *- see below: AspireOne:/home/gary# qgis Warning: Qt: Session management error: None of the authentication protocols specified are supported AspireOne:/home/gary# Regards Gary On 04/08/2010 12:22, Niccolo Rigacci wrote: On Tue, Aug 03, 2010 at 07:25:01PM +0200, Gary Smith wrote: Nicollo, I get a segmentation fault. This occurs immediately the "Starting Python" message is displayed on the Splash screen. Also, there also appears to be a dependency problem with the grass plugin. Check all the old packages/libraries you have installed and remove them manually: dpk --list | grep qgis dpkg --purge... Then re-do the apt-get install. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Re: Installing QGIS 1.5 on Debian Lenny / Squeeze
Niccolo, Thanks for the response. I am trying to install on Squeeze. I have included Squeeze in the sources.list file. I usually use Synaptic but in order to present information for debugging I have used apt-get install. See below: AspireOne:/home/gary# apt-get install qgis Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libqgis1.5.0 python-qgis python-qgis-common qgis-common qgis-plugin-grass-common Recommended packages: qgis-plugin-grass The following NEW packages will be installed: libqgis1.5.0 python-qgis python-qgis-common qgis qgis-common qgis-plugin-grass-common 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/13.9MB of archives. After this operation, 44.8MB of additional disk space will be used. Do you want to continue [Y/n]? y Selecting previously deselected package libqgis1.5.0. (Reading database ... 323370 files and directories currently installed.) Unpacking libqgis1.5.0 (from .../libqgis1.5.0_1.5.0~svn20100411+gfossit60-2_i386.deb) ... Selecting previously deselected package python-qgis-common. Unpacking python-qgis-common (from .../python-qgis-common_1.5.0~svn20100411+gfossit60-2_all.deb) ... Selecting previously deselected package python-qgis. Unpacking python-qgis (from .../python-qgis_1.5.0~svn20100411+gfossit60-2_i386.deb) ... Selecting previously deselected package qgis-common. Unpacking qgis-common (from .../qgis-common_1.5.0~svn20100411+gfossit60-2_all.deb) ... Selecting previously deselected package qgis. Unpacking qgis (from .../qgis_1.5.0~svn20100411+gfossit60-2_i386.deb) ... Selecting previously deselected package qgis-plugin-grass-common. Unpacking qgis-plugin-grass-common (from .../qgis-plugin-grass-common_1.5.0~svn20100411+gfossit60-2_all.deb) ... Processing triggers for man-db ... Processing triggers for menu ... Processing triggers for gnome-menus ... Processing triggers for desktop-file-utils ... Processing triggers for shared-mime-info ... Setting up libqgis1.5.0 (1.5.0~svn20100411+gfossit60-2) ... Setting up python-qgis-common (1.5.0~svn20100411+gfossit60-2) ... Setting up python-qgis (1.5.0~svn20100411+gfossit60-2) ... Setting up qgis-plugin-grass-common (1.5.0~svn20100411+gfossit60-2) ... Setting up qgis-common (1.5.0~svn20100411+gfossit60-2) ... Setting up qgis (1.5.0~svn20100411+gfossit60-2) ... Processing triggers for menu ... AspireOne:/home/gary# Everything goes well except now when I run QGIS I get my old friend ... Couldn't load PyQGIS. Python support will be disabled. Traceback (most recent call last): File "", line 1, in RuntimeError: the sip module implements API v7.0 to v7.1 but the qgis.core module requires API v6.0 Python version: 2.5.5 (r255:77872, Apr 21 2010, 09:27:14) [GCC 4.4.3] QGIS version: 1.5.0-Trunk 'Trunk', exported Python path: ['/usr/share/qgis/python', '/home/gary/.qgis/python', '/home/gary/.qgis/python/plugins', '/usr/share/qgis/python/plugins', '/usr/lib/python2.5/site-packages/SQLAlchemy-0.5.4p2-py2.5.egg', '/usr/lib/python2.5/site-packages/Shapely-1.0.12-py2.5.egg', '/usr/lib/python2.5/site-packages/rpy2-2.0.7-py2.5-linux-i686.egg', '/usr/lib/python2.5', '/usr/lib/python2.5/plat-linux2', '/usr/lib/python2.5/lib-tk', '/usr/lib/python2.5/lib-dynload', '/usr/local/lib/python2.5/site-packages', '/usr/lib/python2.5/site-packages', '/usr/lib/python2.5/site-packages/PIL', '/usr/lib/python2.5/site-packages/gst-0.10', '/usr/lib/pymodules/python2.5', '/usr/lib/pymodules/python2.5/gtk-2.0', '/usr/lib/python2.5/site-packages/wx-2.8-gtk2-unicode'] I have Python 2.5 installed but the default python version is 2.6. I cannot revert python to 2.5. Again QGIS 1.4.0 from the Debian repository installs fine. Also, note from the above that "qgis-plugin-grass" is not a dependency, it is a recommended package only. That is despite "qgis-plugin-grass-common" being a dependency. Is that correct? I appreciate the assistance. Rgds Gary On 04/08/2010 12:22, Niccolo Rigacci wrote: On Tue, Aug 03, 2010 at 07:25:01PM +0200, Gary Smith wrote: Nicollo, I get a segmentation fault. This occurs immediately the "Starting Python" message is displayed on the Splash screen. Also, there also appears to be a dependency problem with the grass plugin. Check all the old packages/libraries you have installed and remove them manually: dpk --list | grep qgis dpkg --purge... Then re-do the apt-get install. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] GeoWebCache in QGIS 1.5...
This url of WMT-S seems to create problem in QGIS : http://v2.suite.opengeo.org/geoserver/gwc/service/wmts?REQUEST=getcapabilities With this url : http://apps.esdi-humboldt.cz/cgi-bin/tilecache/tilecache.cgi It seems slow to read the tiles in QGIS, does the WMS-C reader in QGIS is powerful enough like Openlayers? Cheers, Nicolas 2010/8/4 Nicolas Gignac > Ok, thanks but could someoane has tested with GeoWebCache in QGIS 1.5? > > > 2010/8/3 Jürgen E. > > Hi Nicolas, >> >> On Tue, 03. Aug 2010 at 16:19:57 -0400, Nicolas Gignac wrote: >> >I have downloaded the new version of QGIS 1.5 Tehtys and I try the >> new >> >feature WMS-C reader of tile service, such as Tilecache. >> >However, I was not able to connected properly to GeoWebCache tile >> service >> >such as this one: >> >[1] >> http://maps.opengeo.org/geowebcache/service/wms?request=GetCapabilities >> >> Works fine for me as WMS, but it doesn't advertise any tilesets. >> >> >> Jürgen >> >> >> -- >> Jürgen E. Fischer norBIT GmbH Tel. >> +49-4931-918175-20 >> Dipl.-Inf. (FH) Rheinstraße 13Fax. >> +49-4931-918175-50 >> Software Engineer D-26506 Norden >> http://www.norbit.de >> >> -- >> norBIT Gesellschaft fuer Unternehmensberatung und Informationssysteme mbH >> Rheinstrasse 13, 26506 Norden >> GF: Jelto Buurman, HR: Amtsgericht Emden, HRB 5502 >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> http://lists.osgeo.org/mailman/listinfo/qgis-user >> > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] GeoWebCache in QGIS 1.5...
Ok, thanks but could someoane has tested with GeoWebCache in QGIS 1.5? 2010/8/3 Jürgen E. > Hi Nicolas, > > On Tue, 03. Aug 2010 at 16:19:57 -0400, Nicolas Gignac wrote: > >I have downloaded the new version of QGIS 1.5 Tehtys and I try the new > >feature WMS-C reader of tile service, such as Tilecache. > >However, I was not able to connected properly to GeoWebCache tile > service > >such as this one: > >[1] > http://maps.opengeo.org/geowebcache/service/wms?request=GetCapabilities > > Works fine for me as WMS, but it doesn't advertise any tilesets. > > > Jürgen > > > -- > Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-20 > Dipl.-Inf. (FH) Rheinstraße 13Fax. +49-4931-918175-50 > Software Engineer D-26506 Norden > http://www.norbit.de > > -- > norBIT Gesellschaft fuer Unternehmensberatung und Informationssysteme mbH > Rheinstrasse 13, 26506 Norden > GF: Jelto Buurman, HR: Amtsgericht Emden, HRB 5502 > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: Res: [Qgis-user] management tables
Hi Dario, please keep the conversation on-list, it can be useful to others. On Wed, 2010-08-04 at 07:00 -0700, Dario wrote: > mean the following: > > a field where you can insert a hyperlink to a picture or pdf or doc. > > For example, to view a photo of a building. > > Just as is done in gvSIG or KOSMOS try the edit widgets, especially the "file name" one. You find the widgets in the vector properties, attributes panel. cheers -- Giovanni -- ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] management tables
> You can make a union of tables in qgis? Union/merge/etc. tools are in the vector menu > it is possible to "join" table in qgis? vector -> data management tools -> join attributes it is actually being developed a new branch of qgis that will include a more advanced way to join tables > How to insert field "hiperlink" in table in qgis? what do you mean exactly, adding hyperlinks in table of attributes cells? cheers! -- Giovanni -- ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] management tables
Hello friends list, I would like to know: You can make a union of tables in qgis? it is possible to "join" table in qgis? How to insert field "hiperlink" in table in qgis? Thank you. De: "qgis-user-requ...@lists.osgeo.org" Para: qgis-user@lists.osgeo.org Enviadas: Quarta-feira, 4 de Agosto de 2010 8:01:03 Assunto: Qgis-user Digest, Vol 54, Issue 5 Send Qgis-user mailing list submissions to qgis-user@lists.osgeo.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.osgeo.org/mailman/listinfo/qgis-user or, via email, send a message with subject or body 'help' to qgis-user-requ...@lists.osgeo.org You can reach the person managing the list at qgis-user-ow...@lists.osgeo.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Qgis-user digest..." Today's Topics: 1. Re: Qgis-user Digest, Vol 54, Issue 4 (Gary Smith) 2. check Qgis version (Brad Nesom) 3. postgis problem 1.5 (Brad Nesom) 4. GeoWebCache in QGIS 1.5... (Nicolas Gignac) 5. Re: GeoWebCache in QGIS 1.5... (J?rgen E. Fischer) 6. Compile problem? (M?ri Cedric) 7. Installing QGIS 1.5 on Debian Lenny (Niccolo Rigacci) 8. Re: Compile problem? (J?rgen E. Fischer) 9. AW: [Qgis-user] Compile problem? (M?ri Cedric) -- Message: 1 Date: Tue, 03 Aug 2010 19:25:01 +0200 From: Gary Smith Subject: [Qgis-user] Re: Qgis-user Digest, Vol 54, Issue 4 To: qgis-user@lists.osgeo.org Message-ID: <4c5850ed.3020...@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Nicollo, I get a segmentation fault. This occurs immediately the "Starting Python" message is displayed on the Splash screen. Also, there also appears to be a dependency problem with the grass plugin. I get the following message when I try to upgrade the "qgis-grass-plugin-common" package: "qgis-plugin-grass-common: Depends: qgis-plugin-grass but it is not going to be installed" The "qgis-plugin-grass" package does not have a 1.5 candidate. I hope that you can resolve this shortly as I am now without a working QGIS :-( I could revert to 1.4 but I am really keen to review 1.5. Thanks all! Gary On 03/08/2010 18:00, qgis-user-requ...@lists.osgeo.org wrote: > Send Qgis-user mailing list submissions to > qgis-user@lists.osgeo.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.osgeo.org/mailman/listinfo/qgis-user > or, via email, send a message with subject or body 'help' to > qgis-user-requ...@lists.osgeo.org > > You can reach the person managing the list at > qgis-user-ow...@lists.osgeo.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Qgis-user digest..." > > > Today's Topics: > > 1. Problem with WMS-C (Dominik Helle) > 2. eVis: Making connections permanent? (Timmie) > 3. QGIS version 1.5 packaged for Debian Lenny (Niccolo Rigacci) > 4. Re: Re: Release version 1.5 (Giovanni Manghi) > 5. Re: Re: compiled qgis1.5 but have no Python support >(Harry G McGavran Jr) > 6. Re: Problem with WMS-C (Jürgen E. Fischer) > 7. Re: Error upgrading to 1.5 Ubuntu 10.04 (NoOp) > 8. Re: Problem with WMS-C (Dominik Helle) > 9. MRsid/ ECW (Doug Lane) > > > -- > > Message: 1 > Date: Mon, 2 Aug 2010 17:48:46 +0200 > From: Dominik Helle > Subject: [Qgis-user] Problem with WMS-C > To: qgis-user@lists.osgeo.org > Message-ID:<33aedae6-f89d-4275-b06b-805e4c360...@der-helle.de> > Content-Type: text/plain; charset=us-ascii > > Hey list, > > i was pleased to read that QGIS now supports WMS-C. > So I tried it, but I had unfortunately no success. > > I used a WMS that supports WMS-C and added it with the option tiled=true to >QGIS. > > (e.g. http://localhost:8181/service?TILED=true - as it is specified in the > WMS >Tiling Recommendation >http://wiki.osgeo.org/wiki/WMS_Tiling_Client_Recommendation ) > > QGIS add the WMS, and show a map. But QGIS only send one request to the WMS. > So >it is like using a normal WMS and not a WMS-C. Is there a trick how i can use >a >WMS-C with QGIS? > > Thanks in advance. > > Best regards, > > Dominik > > -- > > Message: 2 > Date: Mon, 2 Aug 2010 16:20:01 + (UTC) > From: Timmie > Subject: [Qgis-user] eVis: Making connections permanent? > To: qgis-user@lists.osgeo.org > Message-ID: > Content-Type: text/plain; charset=us-ascii > > Dear all, > I am just discovering eVis. > > Really a great tool visualising points of interest. > > Is there a option to make a ODBC connection to -- for example -- MS Excel > permanent so that I do not need to reconnect after the project is re-opened? > > Currently, when I save a project with an event layer and re-open it, I am asked > to identify a missing layer. > > I welcome any help. > > Best
AW: [Qgis-user] Compile problem?
Hi Jürgen in /usr/local/foo/lib are also libs from a former 1.5.0. On the same machine are also two other installations of qgis (r13851) both also with prefixes. They work properly. So yes, there is stuff from other/older installations. Is that what you mean? Any idea how to identfiy the 'bad' libs or headers? regards/beste Grüsse Cédric mit freundlichen Grüssen Cédric Möri GIS-Informatiker -- Kanton Solothurn Bau- und Justizdepartement Amt für Geoinformation Rötistrasse 4 4501 Solothurn Telefon: +41 (0)32 627 24 75 Telefax: +41 (0)32 627 22 14 mailto:cedric.mo...@bd.so.ch http://www.agi.so.ch - Originalnachricht - Von: "Jürgen E. Fischer" Gesendet: Mit, 4.8.2010 12:36 An: qgis-user@lists.osgeo.org Betreff: Re: [Qgis-user] Compile problem? Hi Cédric, On Wed, 04. Aug 2010 at 12:19:31 +0200, Möri Cedric wrote: > I just compiled r14004 on RedHat-Linux. Everything seems to go fine, but when > I now start the new qgis, it says > Warning: Couldn't load Python support library: Cannot load library > /lib/qgispython: (/lib/libqgispython.so: Kann die Shared-Object-Datei nicht > öffnen: Datei oder Verzeichnis nicht gefunden) (the german reads: Cannot open > shared object file: File or directory not found) Do you have old QGIS libraries or headers around? Jürgen -- Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-20 Dipl.-Inf. (FH) Rheinstraße 13Fax. +49-4931-918175-50 Software Engineer D-26506 Norden http://www.norbit.de -- norBIT Gesellschaft fuer Unternehmensberatung und Informationssysteme mbH Rheinstrasse 13, 26506 Norden GF: Jelto Buurman, HR: Amtsgericht Emden, HRB 5502 ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Compile problem?
Hi Cédric, On Wed, 04. Aug 2010 at 12:19:31 +0200, Möri Cedric wrote: > I just compiled r14004 on RedHat-Linux. Everything seems to go fine, but when > I now start the new qgis, it says > Warning: Couldn't load Python support library: Cannot load library > /lib/qgispython: (/lib/libqgispython.so: Kann die Shared-Object-Datei nicht > öffnen: Datei oder Verzeichnis nicht gefunden) (the german reads: Cannot open > shared object file: File or directory not found) Do you have old QGIS libraries or headers around? Jürgen -- Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-20 Dipl.-Inf. (FH) Rheinstraße 13Fax. +49-4931-918175-50 Software Engineer D-26506 Norden http://www.norbit.de -- norBIT Gesellschaft fuer Unternehmensberatung und Informationssysteme mbH Rheinstrasse 13, 26506 Norden GF: Jelto Buurman, HR: Amtsgericht Emden, HRB 5502 ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Installing QGIS 1.5 on Debian Lenny
On Tue, Aug 03, 2010 at 07:25:01PM +0200, Gary Smith wrote: > Nicollo, > > I get a segmentation fault. This occurs immediately the "Starting > Python" message is displayed on the Splash screen. > > Also, there also appears to be a dependency problem with the grass plugin. Check all the old packages/libraries you have installed and remove them manually: dpk --list | grep qgis dpkg --purge ... Then re-do the apt-get install. -- Niccolo Rigacci Firenze - Italy ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Compile problem?
Hi all I just compiled r14004 on RedHat-Linux. Everything seems to go fine, but when I now start the new qgis, it says Warning: Couldn't load Python support library: Cannot load library /lib/qgispython: (/lib/libqgispython.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden) (the german reads: Cannot open shared object file: File or directory not found) I'm using a CMAKE_INSTALL_PREFIX which points to /usr/local/foo In fact /lib/libqgispython.so doesn't exist, but with the prefix I'm expecting the so-file in /usr/local/foo/lib. And that's where I found libqgispython.so which links to libqgispython.so.1.6.0 in the same directory. I did also a make clean, but the same result. Has anybody a hint for me, what I'm missing? Do I have some misconfiguration in my ccmake or what else could be wrong? Regards Cédric mit freundlichen Grüssen Cédric Möri GIS-Informatiker -- Kanton Solothurn Bau- und Justizdepartement Amt für Geoinformation Rötistrasse 4 4501 Solothurn Telefon: +41 (0)32 627 24 75 Telefax: +41 (0)32 627 22 14 mailto:cedric.mo...@bd.so.ch http://www.agi.so.ch ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user