Re: [Qgis-user] [QGIS 2.10.1-Pisa, OSX 10.10.4] Raster colormap does not work
Hi John, You might be running in the Mac-only issue http://hub.qgis.org/issues/13162 which has been discussed in http://gis.stackexchange.com/questions/156324/unable-to-stylize-as-pseudocolor-render-type-on-mac-osx/157911#157911 Best wishes, Anita On Sun, Aug 16, 2015 at 8:26 AM, John Helly hel...@ucsd.edu wrote: Hi. I've just installed QGIS 2.10.1-Pisa and find that the raster colormap does not work. I've tested the same dataset on 2.6.1-Brighton and it does work. Any ideas what might be wrong? This is the distro from Kyngchaos. J. -- John Helly, University of California, San Diego / San Diego Supercomputer Center / Scripps Institution of Oceanography / 760 840 8660 mobile / stonesteps (Skype) / stonesteps7 (iChat) / http://www.sdsc.edu/~hellyj ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] [QGIS 2.10.1-Pisa, OSX 10.10.4] Raster colormap does not work
Hi. I've just installed QGIS 2.10.1-Pisa and find that the raster colormap does not work. I've tested the same dataset on 2.6.1-Brighton and it does work. Any ideas what might be wrong? This is the distro from Kyngchaos. J. -- John Helly, University of California, San Diego / San Diego Supercomputer Center / Scripps Institution of Oceanography / 760 840 8660 mobile / stonesteps (Skype) / stonesteps7 (iChat) / http://www.sdsc.edu/~hellyj attachment: hellyj.vcf___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] ECW display
Hi Piotr, On Sun, 16. Aug 2015 at 12:17:41 +0200, Piotr Kania wrote: I noticed that ECW rendering is better in case of Qgis Standalone Installer than in OSGeo4W Network Installer (win 7 x64, home edition, both qgis 64 bit ver.). In OSGeo4W Qgis ECW rasters don't display immediately, as it is in Standalone Qgis - is it just in my laptop or Qgis behaves in such way everywhere? That's the reason I use only Qgis Standalone Installer as I work all the time with ECW images. Sounds very odd - as the standalone installer and OSGeo4W provide the same binaries. But the standalone installer is a snapshot of OSGeo4W from the time the when it was made - so there might be updates that could cause this. But I'm not aware of any. GDAL didn't change. Jürgen -- Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-31 Dipl.-Inf. (FH) Rheinstraße 13 Fax. +49-4931-918175-50 Software Engineer D-26506 Norden http://www.norbit.de QGIS release manager (PSC) GermanyIRC: jef on FreeNode signature.asc Description: Digital signature ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] ECW display
Hi, I noticed that ECW rendering is better in case of Qgis Standalone Installer than in OSGeo4W Network Installer (win 7 x64, home edition, both qgis 64 bit ver.). In OSGeo4W Qgis ECW rasters don't display immediately, as it is in Standalone Qgis - is it just in my laptop or Qgis behaves in such way everywhere? That's the reason I use only Qgis Standalone Installer as I work all the time with ECW images. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Reclass Vector
HELLO Guys!! I want to make a demarcation of a nature reserve area, considering the wealth of species and the conservation value of each. For this purpose in the area of study I designed a grilling in which I included the species richness and other gridding the area in which I included the conservative value species. What I do now is a relclasificación of these data as follows: For cells with conservative values [1-4) set the value of 1. For cells with conservative [4-32 values) set to 0. Once this is done, I want to make an intersection of information, to establish the relationship between the areas defined as priority and species richness. My problem starts to perform the mecionada reclassification, ie designate values of 0 and 1 at intervals raised. The other problem is how do I make the crossing of information? What function the qgis? Thank You I await your news PS: I speak Spanish. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Data Defined Properties in 2.8.3
Oh Thanks - Was used to the button - :-) Regards Lene -Oprindelig meddelelse- Fra: Nyall Dawson [mailto:nyall.daw...@gmail.com] Sendt: 16. august 2015 23:48 Til: Lene Fischer Cc: qgis-user@lists.osgeo.org Emne: Re: [Qgis-user] Data Defined Properties in 2.8.3 On 17 August 2015 at 07:33, Lene Fischer l...@ign.ku.dk wrote: Hi, I can´t find the Data Defined Properties in 2.8.3. Has it moved to somewhere else than Style-Tab ? Hi Lene, It was modified to follow the same style as labelling composer. Look for the little yellow buttons next to each of the symbol properties. Clicking that will allow you to specify the data defined field/expression relating to that particular property. Regards, Nyall Regards Lene Fischer Associate Professor Department of Geosciences and Natural Resource Management University of Copenhagen MOB +45 40115084 l...@ign.ku.dk ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Exporting a raster from WMS
Hi Rafal, You can right-click at your raster layer and choose Save As. You can choose both extent and resolution. Regards Lene Fischer Associate Professor Department of Geosciences and Natural Resource Management University of Copenhagen MOB +45 40115084 l...@ign.ku.dk -Oprindelig meddelelse- Fra: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] På vegne af Rafal JOnca Sendt: 16. august 2015 21:57 Til: qgis-user@lists.osgeo.org Emne: [Qgis-user] Exporting a raster from WMS Dear friends, I have one question. I am not a Qgis user. How can I export a map from WMS to GeoTIFF, but in size bigger than screen size ? Thank you, Rafal Jonca ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Exporting a raster from WMS
Dear friends, I have one question. I am not a Qgis user. How can I export a map from WMS to GeoTIFF, but in size bigger than screen size ? Thank you, Rafal Jonca ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Data Defined Properties in 2.8.3
On 17 August 2015 at 07:33, Lene Fischer l...@ign.ku.dk wrote: Hi, I can´t find the Data Defined Properties in 2.8.3. Has it moved to somewhere else than Style-Tab ? Hi Lene, It was modified to follow the same style as labelling composer. Look for the little yellow buttons next to each of the symbol properties. Clicking that will allow you to specify the data defined field/expression relating to that particular property. Regards, Nyall Regards Lene Fischer Associate Professor Department of Geosciences and Natural Resource Management University of Copenhagen MOB +45 40115084 l...@ign.ku.dk ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Georeferencing Vector Files
Hello Tom, Thanks for your note, sorry for the delay. Yes, the v.transform seems to work as advertised. Thanks for clarifying which XY columns are for which file. I want to do some more testing on some simple files just to confirm what is happening but it seems to be the correct tool for I'm trying to do. I agree that adding vector capability to the GeoReferencer would be great. I gather that some of these upgrades need to be funded somehow, not all of these features are free I guess. I'm fine with that concept if we know they will work when finished. The missing dependency problem seems to be persistent. I think it tends to blight an otherwise marvelous collection of very powerful GIS tools. Thanks Tom, Cheers . . . . . . . . Spring Harrison At 11-08-2015 01:17 Tuesday, Thomas Colley wrote: Glad youre making some progress. I must admit I didnt know about the simplified/advanced views in the processing toolbox, it must have been by luck that I got into the advanced bit! Have you had any luck with v.transform.pointsfile? Below is an example of the points text file that youd need to feed it. The first 2 columns are the x,y of your unreferenced drawing and the second 2 are the x,y of the correct location. I used the coordinate capture plugin to get these points. Hope this helps # Linear transformation from XY to UTM coordinates: # 4 maps corners defined # UL NW # UR NE # LR SW # LL SE -0.236 31.702 273503.909 193355.703 50.880 48.355 273554.880 193372.500 90.121 20.842 273594.121 193344.697 38.861 4.190 273542.816 193328.027 P.S. It would be REALLY amazing if support could be added to the Georeferencer for vector layers. It seems that just provides a really nice interface for getting these same coordinate pairs. I would have thought that it would be a simple thing to add vector support in there (big words from someone with no idea how to do it!) and would be massively useful for us at least. From: Springfield Harrison [ mailto:stellar...@gmail.com] Sent: 11 August 2015 07:28 To: Anita Graser Cc: Nathan Woodrow; Alex Mandel; Thomas Colley; qgis-user Subject: Re: [Qgis-user] Georeferencing Vector Files Thanks Anita, that hidden feature was pointed out and it did the trick. As I mentioned earlier, the option may not be a bad idea, it just needs to be put at the top and made more obvious. Thanks again, Cheers . . . . . . . . Spring Harrison At 10-08-2015 23:23 Monday, Anita Graser wrote: Most likely the algorithm is hidden by the simplified interface. Change to advanced using the drop down in the bottom of the toolbox. And yes, we are already discussing if this interface option makes sense. Best wishes Anita Hey Yourself,         Very interesting, this is what I get, bugger all:         So what accounts for the difference? Some installation quirk no doubt. I did select GRASS as an installation option. In 2.8.3 it was listed under plug-ins, but under 2.10.1 is no longer there. But it was installed as a standalone.         Consistency does not seem to be a strong point here.                 I do appreciate the help however, I'm sure there is an answer somewhere, Cheers . . . . . . . . Spring Harrison At 10-08-2015 22:10 Monday, Nathan Woodrow wrote: Hey, Did you do a search in the top part of the dock: Regards, Nathan ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Data Defined Properties in 2.8.3
Hi, I can´t find the Data Defined Properties in 2.8.3. Has it moved to somewhere else than Style-Tab ? Regards Lene Fischer Associate Professor Department of Geosciences and Natural Resource Management University of Copenhagen MOB +45 40115084 l...@ign.ku.dk ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
