[Qgis-user] Help for QGIS installation /Aide pour installer QGIS
Dear all, In case, you can write in French! I need a strong help for updating or installing last version of QGIS. Working in linus (Debian GNU/Linux 9 (stretch) 64 bits). In my computer I have a version of QGIS (2.4 ESSEN). In few days I will have my first training with QGIS and I must to install: QGIS 3.10.14 LTR. I would like to know what is the better way: 1)To update of QGIS 2.4 to 3.10.14 LTR, How to do it ? 2) To remove QGIS 2.4 and then re-install following the steps of QGIS site for linus ? I am so afraid of this last solution: if I remove and I cannot install the new QGIS. I administrator of my computer but I have also many proxis installed by my company, so I didn't try, I am waiting for advises. Thank you very much ! Gloria [X] Gloria SENFAUTE Ingénieur Chercheur, PhD Expert Aléa Sismique Département Electrotechnique et Mécanique des Structures - ERMES Groupe Séisme et Impacts, EDF Lab Paris-Saclay 7 Boulevard Gaspard Monge 91120 Palaiseau gloria.senfa...@edf.fr Tél. : 33 1 78193433 Un geste simple pour l'environnement, n'imprimez ce message que si vous en avez l'utilité. Ce message et toutes les pièces jointes (ci-après le 'Message') sont établis à l'intention exclusive des destinataires et les informations qui y figurent sont strictement confidentielles. Toute utilisation de ce Message non conforme à sa destination, toute diffusion ou toute publication totale ou partielle, est interdite sauf autorisation expresse. Si vous n'êtes pas le destinataire de ce Message, il vous est interdit de le copier, de le faire suivre, de le divulguer ou d'en utiliser tout ou partie. Si vous avez reçu ce Message par erreur, merci de le supprimer de votre système, ainsi que toutes ses copies, et de n'en garder aucune trace sur quelque support que ce soit. Nous vous remercions également d'en avertir immédiatement l'expéditeur par retour du message. Il est impossible de garantir que les communications par messagerie électronique arrivent en temps utile, sont sécurisées ou dénuées de toute erreur ou virus. This message and any attachments (the 'Message') are intended solely for the addressees. The information contained in this Message is confidential. Any use of information contained in this Message not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. If you are not the addressee, you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return message. E-mail communication cannot be guaranteed to be timely secure, error or virus-free. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Help for QGIS installation /Aide pour installer QGIS
Hi Gloria, You could install QGIS in a virtual machine using Virtual Box or in a container with Docker (https://github.com/qgis/QGIS/tree/master/.docker#running-qgis). This way you'll be safe of any bad changes. Le 23/02/2021 à 11:23, SENFAUTE Gloria a écrit : Dear all, In case, you can write in French! I need a strong help for updating or installing last version of QGIS. Working in linus (Debian GNU/Linux 9 (stretch) 64 bits). In my computer I have a version of QGIS (2.4 ESSEN). In few days I will have my first training with QGIS and I must to install: QGIS 3.10.14 LTR. I would like to know what is the better way: 1)To update of QGIS 2.4 to 3.10.14 LTR, *How to do it* ? 2) To remove QGIS 2.4 and then re-install following the steps of QGIS site for linus ? I am so afraid of this last solution: if I remove and I cannot install the new QGIS. I administrator of my computer but I have also many proxis installed by my company, so I didn’t try, I am waiting for advises. Thank you very much ! Gloria *Gloria SENFAUTE* *Ingénieur Chercheur, PhD* Expert Aléa Sismique Département Electrotechnique et Mécanique des Structures - ERMES Groupe Séisme et Impacts, EDF Lab Paris-Saclay 7 Boulevard Gaspard Monge 91120 Palaiseau *gloria.senfa...@edf.fr* Tél. : 33 1 78193433 Un geste simple pour l'environnement, n'imprimez ce message que si vous en avez l'utilité. Ce message et toutes les pièces jointes (ci-après le 'Message') sont établis à l'intention exclusive des destinataires et les informations qui y figurent sont strictement confidentielles. Toute utilisation de ce Message non conforme à sa destination, toute diffusion ou toute publication totale ou partielle, est interdite sauf autorisation expresse. Si vous n'êtes pas le destinataire de ce Message, il vous est interdit de le copier, de le faire suivre, de le divulguer ou d'en utiliser tout ou partie. Si vous avez reçu ce Message par erreur, merci de le supprimer de votre système, ainsi que toutes ses copies, et de n'en garder aucune trace sur quelque support que ce soit. Nous vous remercions également d'en avertir immédiatement l'expéditeur par retour du message. Il est impossible de garantir que les communications par messagerie électronique arrivent en temps utile, sont sécurisées ou dénuées de toute erreur ou virus. This message and any attachments (the 'Message') are intended solely for the addressees. The information contained in this Message is confidential. Any use of information contained in this Message not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. If you are not the addressee, you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return message. E-mail communication cannot be guaranteed to be timely secure, error or virus-free. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] snapping polygons together
I am making a grid layer and I want to copy/move some of them to 'lock' into adjacent ones perfectly. Trying to avoid messing with the vertex editor. zooming in close to the edges never gets it exact. I don't want to drag the corner vertices and snap, I just want to move the whole polygon and snap it to the edge of another. Maybe I'm missing something. -- Sincerely, Ryan ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Help for QGIS installation /Aide pour installer QGIS
Hi, 2.4 and 3.x can live together on the same machine in Windows. Is it the same in Linux? Probably... I figure you can install 3.10 without removing anything. Can a true Linux fan confirm? As for the Linux installation, I followed the instructions here on a Ubuntu machine and it worked well. https://www.qgis.org/fr/site/forusers/alldownloads.html Nicolas Cadieux https://gitlab.com/njacadieux > Le 23 févr. 2021 à 05:31, SENFAUTE Gloria a écrit : > > > Dear all, > In case, you can write in French! > I need a strong help for updating or installing last version of QGIS. > Working in linus (Debian GNU/Linux 9 (stretch) 64 bits). > In my computer I have a version of QGIS (2.4 ESSEN). > In few days I will have my first training with QGIS and I must to install: > QGIS 3.10.14 LTR. > > I would like to know what is the better way: > 1)To update of QGIS 2.4 to 3.10.14 LTR, How to do it ? > 2) To remove QGIS 2.4 and then re-install following the steps of QGIS site > for linus ? > I am so afraid of this last solution: if I remove and I cannot install the > new QGIS. > I administrator of my computer but I have also many proxis installed by my > company, so I didn’t try, I am waiting for advises. > > Thank you very much ! > > Gloria > > > > > > > Gloria SENFAUTE > Ingénieur Chercheur, PhD > Expert Aléa Sismique > Département Electrotechnique et Mécanique des Structures - ERMES > Groupe Séisme et Impacts, EDF Lab Paris-Saclay > 7 Boulevard Gaspard Monge > 91120 Palaiseau > > gloria.senfa...@edf.fr > Tél. : 33 1 78193433 > > Un geste simple pour l'environnement, n'imprimez ce message que si vous en > avez l'utilité. > > > Ce message et toutes les pièces jointes (ci-après le 'Message') sont établis > à l'intention exclusive des destinataires et les informations qui y figurent > sont strictement confidentielles. Toute utilisation de ce Message non > conforme à sa destination, toute diffusion ou toute publication totale ou > partielle, est interdite sauf autorisation expresse. > > Si vous n'êtes pas le destinataire de ce Message, il vous est interdit de le > copier, de le faire suivre, de le divulguer ou d'en utiliser tout ou partie. > Si vous avez reçu ce Message par erreur, merci de le supprimer de votre > système, ainsi que toutes ses copies, et de n'en garder aucune trace sur > quelque support que ce soit. Nous vous remercions également d'en avertir > immédiatement l'expéditeur par retour du message. > > Il est impossible de garantir que les communications par messagerie > électronique arrivent en temps utile, sont sécurisées ou dénuées de toute > erreur ou virus. > > > This message and any attachments (the 'Message') are intended solely for the > addressees. The information contained in this Message is confidential. Any > use of information contained in this Message not in accord with its purpose, > any dissemination or disclosure, either whole or partial, is prohibited > except formal approval. > > If you are not the addressee, you may not copy, forward, disclose or use any > part of it. If you have received this message in error, please delete it and > all copies from your system and notify the sender immediately by return > message. > > E-mail communication cannot be guaranteed to be timely secure, error or > virus-free. > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] snap after changing the datasource of a layer
Hi there, Using 3.10.7 and sometimes experience problems with snapping. Working with a shape I snap to a dxf file. When I change the data source of the dxf layer (from something.dxf to something2.dxf) it not always snap to the newly added or changed features. Seems like there is no update of the index? Is there a way to force the update of the index? Toggel layer off and on for snapping or change snappable layers and back did not help.___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS 3.18.0 and QGIS 3.14.4 (LTR) packages released and OSGeo4W reboot
Hi there, I'm happy to announce that the QGIS packages of 3.16.4 (LTR) 'Hannover' and the our latest release 3.18.0 'Zürich' are ready on https://qgis.org/de/site/forusers/download.html. This includes Linux, Mac and Windows packages. With the availability of a new regular release the current long-term release 3.16 replaces the previous long-term release 3.10 in the long term package repositories. The Windows standalone installer are as usual made from the OSGeo4W packages. In OSGeo4W there has lately been a big effort to reboot it, meaning that it has been completely rebuilt using newer source versions of mostly every package using a newer compiler. As this happened shortly before the QGIS release the new packages are still in a separate repository for testing. You can install them using the osgeo4w installer on http://download.osgeo.org/osgeo4w/testing/osgeo4w-setup.exe (note the testing - the old installer will also work, if you point it to the new site, but it will default to the old). Within the reboot a lot of old packages were dropped (including dependencies to old microsoft runtimes), new packages were introduced and also package names were revised. Long story short: you cannot upgrade from old installs and have to remove and reinstall or use a separate directory. As the new OSGeo4W only supports 64bit the default root directory was changed to C:\OSGeo4W, which might help with that if you were on 64bit earlier. Also note that it now only has one version of Python - namely 3.9, which doesn't support Windows 7 anymore. Other updates include Qt 5.15, GDAL 3.2, PROJ 7.2 and SAGA 7.8. It also has PDAL 2.2 which is required for native support of point clouds in QGIS - something that you find lacking in the "old" OSGeo4W repository and in turn in the current standalones. The new installer also doesn't require administrator privileges anymore. Unless you run it elevated (ie. as Administrator) the option to create shortcuts for all users will be unavailable. The testing repository will eventually replace the old repository and also be used to make standalone installers. As it has grown to exceed the 2GB limit of NSIS the standalone installers will then be switched to MSI. The package recipes currently reside at https://github.com/jef-n/OSGeo4W. Please test and report packaging issues to the OSGeo4W TRAC at https://trac.osgeo.org/osgeo4w. Jürgen -- Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-31 Dipl.-Inf. (FH) Rheinstraße 13 Fax. +49-4931-918175-50 Software Engineer D-26506 Nordenhttps://www.norbit.de QGIS release manager (PSC) GermanyIRC: jef on FreeNode signature.asc Description: PGP signature ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Broken download link
The link to download QGIS 3.18 64-bit windows is giving me a 404 ‘file not found’ error. Thanks, Brian Gilhuly From: Qgis-user On Behalf Of Jauk Hek Sent: February 23, 2021 10:46 To: qgis-user@lists.osgeo.org Subject: [Qgis-user] snap after changing the datasource of a layer Hi there, Using 3.10.7 and sometimes experience problems with snapping. Working with a shape I snap to a dxf file. When I change the data source of the dxf layer (from something.dxf to something2.dxf) it not always snap to the newly added or changed features. Seems like there is no update of the index? Is there a way to force the update of the index? Toggel layer off and on for snapping or change snappable layers and back did not help. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Help for QGIS installation /Aide pour installer QGIS
Hi Gloria, Not sure if you can pull up to 3.10 on Debian Stretch/9 (which is rather old). If I look here: https://qgis.org/debian/dists/stretch/main/binary-amd64/Packages it looks like that if you try to install QGIS in the normal/distro way, you will end up with QGIS 3.4 (I think, anybody can confirm ...) Isn't it possible to upgrade your machine to Debian 10/Buster? Then you can upgrade to 3.12 (which is 3.10 plus a little extra ;-) ) if you use the "Démarrage rapide" https://www.qgis.org/fr/site/forusers/alldownloads.html#quickstart Or even 3.14, 3.16 (tell your educator there is a newer LTR ;-) ) or higher? If all fails, you could try to install a flatpak (but not sure about that either for Debian 9): https://www.qgis.org/fr/site/forusers/alldownloads.html#flatpak And if even that fails... and you have some experience with compiling yourself, you could compile from source... But: Stretch is rather old, if you ask me: upgrade to Buster/10 first Good Luck & regards, Richard Duivenvoorde On 2/23/21 11:23 AM, SENFAUTE Gloria wrote: > Dear all, > > In case, you can write in French! > > I need a strong help for updating or installing last version of QGIS. > > Working in linus (Debian GNU/Linux 9 (stretch) 64 bits). > > In my computer I have a version of QGIS (2.4 ESSEN). > > In few days I will have my first training with QGIS and I must to install: > QGIS 3.10.14 LTR. > > > > I would like to know what is the better way: > > 1)To update of QGIS 2.4 to 3.10.14 LTR, *How to do it* ? > > 2) To remove QGIS 2.4 and then re-install following the steps of QGIS site > for linus ? > > I am so afraid of this last solution: if I remove and I cannot install the > new QGIS. > > I administrator of my computer but I have also many proxis installed by my > company, so I didn’t try, I am waiting for advises. > > > > Thank you very much ! > > > > Gloria > > > > > > > > > > > > > > *Gloria SENFAUTE* > *Ingénieur Chercheur, PhD* > Expert Aléa Sismique > Département Electrotechnique et Mécanique des Structures - ERMES > Groupe Séisme et Impacts, EDF Lab Paris-Saclay > 7 Boulevard Gaspard Monge > 91120 Palaiseau > > > > *gloria.senfa...@edf.fr* > > Tél. : 33 1 78193433 > > > > > > Un geste simple pour l'environnement, n'imprimez ce message que si vous en > avez l'utilité. > > > > > Ce message et toutes les pièces jointes (ci-après le 'Message') sont établis > à l'intention exclusive des destinataires et les informations qui y figurent > sont strictement confidentielles. Toute utilisation de ce Message non > conforme à sa destination, toute diffusion ou toute publication totale ou > partielle, est interdite sauf autorisation expresse. > > Si vous n'êtes pas le destinataire de ce Message, il vous est interdit de le > copier, de le faire suivre, de le divulguer ou d'en utiliser tout ou partie. > Si vous avez reçu ce Message par erreur, merci de le supprimer de votre > système, ainsi que toutes ses copies, et de n'en garder aucune trace sur > quelque support que ce soit. Nous vous remercions également d'en avertir > immédiatement l'expéditeur par retour du message. > > Il est impossible de garantir que les communications par messagerie > électronique arrivent en temps utile, sont sécurisées ou dénuées de toute > erreur ou virus. > > > This message and any attachments (the 'Message') are intended solely for the > addressees. The information contained in this Message is confidential. Any > use of information contained in this Message not in accord with its purpose, > any dissemination or disclosure, either whole or partial, is prohibited > except formal approval. > > If you are not the addressee, you may not copy, forward, disclose or use any > part of it. If you have received this message in error, please delete it and > all copies from your system and notify the sender immediately by return > message. > > E-mail communication cannot be guaranteed to be timely secure, error or > virus-free. > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Broken download link
On 2/23/21 5:39 PM, Brian Gilhuly wrote: > The link to download QGIS 3.18 64-bit windows is giving me a 404 ‘file not > found’ error. Please try again (or later)... I just checked and now it is available. (we do use some mirrors to spread the load... and maybe this one was not yet updated...) Regards, Richard Duivenvoorde ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Symbol lines every km, moving when changing scale or moving map
Hi, Not sure if/how I can help on this benchmark. If I understand well you want to know if disabling the simplification on the marker line symbol layer only would make a huge difference or not on rendering performance. But as far as I saw the option is only available for the whole layer at the moment. Jérémie. Le ven. 19 févr. 2021 à 22:25, Nyall Dawson a écrit : > On Fri, 19 Feb 2021 at 23:00, Andreas Neumann wrote: > > > > Hi Jérémie, > > > > Ah good to hear! > > > > I'm not a big fan of this fact that line simplification is turned on by > default in QGIS. I believe that users should consciously turn it on if they > want it! > > I'd be interested to see some benchmarks of disabling vs enabling > simplification for the marker line symbol layer alone. If it's not too > expensive, we could skip it automatically for line marker symbol > layers (it makes a HUGE difference to the rendering speed for simple > line layers and other symbol layer types, but the intention is that > the results should be visually identical to no simplification). > > Nyall > > > > > Your example shows that it can lead to confusion (understandably). > > > > Good that it works now. Note that you can override this setting on a per > layer base in the layer properties - so not all layers need to have the > same setting. > > > > Greetings, > > > > Andreas > > > > On 2021-02-19 13:40, Prud'homme Jérémie wrote: > > > > Hi, > > > > I had simplification turned on, indeed... > > > > I deactivated it : > > - in the Options as you mention, so that it is deactivated for newly > added layers > > - in my layer options (Rendering properties) > > > > And it is ok now. > > > > It makes sense that if the line is simplified the distance vary ! > > > > Thanks Andreas. > > > > > > Jérémie. > > > > Le ven. 19 févr. 2021 à 11:12, Andreas Neumann a > écrit : > > > > Hi Jérémie, > > > > Do you have geometry simplification turned off? See "Settings" --> > "Options" --> "Rendering" --> "Enable feature simplification ..." > > > > Make sure this is deactivated (I think it is enabled by default). > > > > Greetings, > > > > Andreas > > > > > > On 2021-02-19 11:05, Prud'homme Jérémie wrote: > > > > Tested too fast :( > > > > Behavior is ok when zooming in, but still problems when zooming out > (whereas the entire feature is visible !). > > See here : https://www.zupimages.net/viewer.php?id=21/07/ehlo.gif > > > > Circles should follow the strokes generated with the tool "Points along > geometry". > > > > > > Jérémie. > > > > Le ven. 19 févr. 2021 à 10:03, Prud'homme Jérémie > a écrit : > > > > Hi, > > > > Thank you very much Nyall, this one was pretty well hidden. > > > > With clipping unchecked, behavior is as expected for my use case. > > > > > > Jérémie. > > > > Le jeu. 18 févr. 2021 à 23:29, Nyall Dawson a > écrit : > > > > On Wed, 13 Jan 2021 at 06:33, Prud'homme Jérémie > wrote: > > > > > > Hi, > > > > > > I'm using QGIS 3.10. > > > > > > I tried to use only symbology to display a stroke every km along a > road. > > > The project CRS is 2154 (Lambert 93). > > > > > > When adding a ""symbol line" with an interval of 1000 map units (meter > for 2154) – or 1000 meters at scale, same result – I achieve to display > symbols every km. > > > > > > Problem is when I move the map or change scale, the symbols do not > always stay in place. They are sometimes misplaced. > > > > > > I've been told that problem can be that the first node of the line is > not always the reference to calculate the intervals. > > > > From the bottom of the symbol widget, click the "Advanced" button and > > uncheck "Clip features to canvas extent". > > > > Nyall > > > > > > > > > > > > You can find a GIF here that displays my problem : > https://zupimages.net/viewer.php?id=21/02/nvr2.gif > > > > > > Circles are symbols via Symbology. > > > Strokes are symbos on points generated vith the tool "Points along > geometry". > > > > > > You can see that circles are not always at the same place as the > strokes. > > > > > > Is it a "normal" behavior ? > > > Anyway as a user I would expect that symbols are always generated at > the same place from the starting node. > > > > > > Thanks for your enlightments on this. > > > > > > Jérémie. > > > ___ > > > Qgis-user mailing list > > > Qgis-user@lists.osgeo.org > > > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > > > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > > > > > > ___ > > Qgis-user mailing list > > Qgis-user@lists.osgeo.org > > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > > > > > > > > ___ > > Qgis-user mailing list > > Qgis-user@lists.osgeo.org > > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > __
Re: [Qgis-user] QGIS 3.18.0 and QGIS 3.14.4 (LTR) packages released and OSGeo4W reboot
Hi Jürgen Great - thanks a lot for all your efforts! As for PDAL / point clouds, during the development the initial requirement for PDAL 2.2 has been later dropped to PDAL >= 1.7: https://github.com/hobu/untwine/commit/5d83f32f81aa461a9b12f1084197aa7af5f8ec19 The current windows standalone QGIS installer is currently unable to open LAS/LAZ files, which is confusing to users... Would it be possible to compile QGIS with PDAL 1.8 (which is already included in osge4w packages) ? There should be hopefully no code changes necessary. Howard says PDAL 1.8 is quite old and has some bugs, but that's still better than no LAS/LAZ support at all :-) Regards Martin On Tue, Feb 23, 2021 at 5:37 PM Jürgen E. Fischer wrote: > Hi there, > > I'm happy to announce that the QGIS packages of 3.16.4 (LTR) 'Hannover' > and the > our latest release 3.18.0 'Zürich' are ready on > https://qgis.org/de/site/forusers/download.html. This includes Linux, > Mac and > Windows packages. With the availability of a new regular release the > current > long-term release 3.16 replaces the previous long-term release 3.10 in the > long > term package repositories. > > The Windows standalone installer are as usual made from the OSGeo4W > packages. > > In OSGeo4W there has lately been a big effort to reboot it, meaning that > it has > been completely rebuilt using newer source versions of mostly every > package > using a newer compiler. As this happened shortly before the QGIS release > the > new packages are still in a separate repository for testing. > > You can install them using the osgeo4w installer on > http://download.osgeo.org/osgeo4w/testing/osgeo4w-setup.exe (note the > testing - > the old installer will also work, if you point it to the new site, but it > will > default to the old). > > Within the reboot a lot of old packages were dropped (including > dependencies to > old microsoft runtimes), new packages were introduced and also package > names > were revised. > > Long story short: you cannot upgrade from old installs and have to remove > and > reinstall or use a separate directory. As the new OSGeo4W only supports > 64bit > the default root directory was changed to C:\OSGeo4W, which might help with > that if you were on 64bit earlier. > > Also note that it now only has one version of Python - namely 3.9, which > doesn't support Windows 7 anymore. Other updates include Qt 5.15, GDAL > 3.2, > PROJ 7.2 and SAGA 7.8. > > It also has PDAL 2.2 which is required for native support of point clouds > in > QGIS - something that you find lacking in the "old" OSGeo4W repository and > in > turn in the current standalones. > > The new installer also doesn't require administrator privileges anymore. > Unless you run it elevated (ie. as Administrator) the option to create > shortcuts for all users will be unavailable. > > The testing repository will eventually replace the old repository and also > be > used to make standalone installers. As it has grown to exceed the 2GB > limit > of NSIS the standalone installers will then be switched to MSI. > > The package recipes currently reside at https://github.com/jef-n/OSGeo4W. > > Please test and report packaging issues to the OSGeo4W TRAC at > https://trac.osgeo.org/osgeo4w. > > > > Jürgen > > -- > Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-31 > Dipl.-Inf. (FH) Rheinstraße 13 Fax. +49-4931-918175-50 > Software Engineer D-26506 Norden > https://www.norbit.de > QGIS release manager (PSC) GermanyIRC: jef on FreeNode > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [osgeo4w-dev] QGIS 3.18.0 and QGIS 3.14.4 (LTR) packages released and OSGeo4W reboot
Hi Jürgen! Thanks for all that great work! Are there any instructions on how to use the scripts to build the packages? Did you consider building a python gdal/proj package that could be installed on the normal python distribution as well as on OSGeo4W? Idan On Tue, 23 Feb 2021, 18:36 Jürgen E. Fischer, wrote: > Hi there, > > I'm happy to announce that the QGIS packages of 3.16.4 (LTR) 'Hannover' > and the > our latest release 3.18.0 'Zürich' are ready on > https://qgis.org/de/site/forusers/download.html. This includes Linux, > Mac and > Windows packages. With the availability of a new regular release the > current > long-term release 3.16 replaces the previous long-term release 3.10 in the > long > term package repositories. > > The Windows standalone installer are as usual made from the OSGeo4W > packages. > > In OSGeo4W there has lately been a big effort to reboot it, meaning that > it has > been completely rebuilt using newer source versions of mostly every > package > using a newer compiler. As this happened shortly before the QGIS release > the > new packages are still in a separate repository for testing. > > You can install them using the osgeo4w installer on > http://download.osgeo.org/osgeo4w/testing/osgeo4w-setup.exe (note the > testing - > the old installer will also work, if you point it to the new site, but it > will > default to the old). > > Within the reboot a lot of old packages were dropped (including > dependencies to > old microsoft runtimes), new packages were introduced and also package > names > were revised. > > Long story short: you cannot upgrade from old installs and have to remove > and > reinstall or use a separate directory. As the new OSGeo4W only supports > 64bit > the default root directory was changed to C:\OSGeo4W, which might help with > that if you were on 64bit earlier. > > Also note that it now only has one version of Python - namely 3.9, which > doesn't support Windows 7 anymore. Other updates include Qt 5.15, GDAL > 3.2, > PROJ 7.2 and SAGA 7.8. > > It also has PDAL 2.2 which is required for native support of point clouds > in > QGIS - something that you find lacking in the "old" OSGeo4W repository and > in > turn in the current standalones. > > The new installer also doesn't require administrator privileges anymore. > Unless you run it elevated (ie. as Administrator) the option to create > shortcuts for all users will be unavailable. > > The testing repository will eventually replace the old repository and also > be > used to make standalone installers. As it has grown to exceed the 2GB > limit > of NSIS the standalone installers will then be switched to MSI. > > The package recipes currently reside at https://github.com/jef-n/OSGeo4W. > > Please test and report packaging issues to the OSGeo4W TRAC at > https://trac.osgeo.org/osgeo4w. > > > > Jürgen > > -- > Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-31 > Dipl.-Inf. (FH) Rheinstraße 13 Fax. +49-4931-918175-50 > Software Engineer D-26506 Norden > https://www.norbit.de > QGIS release manager (PSC) GermanyIRC: jef on FreeNode > ___ > osgeo4w-dev mailing list > osgeo4w-...@lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/osgeo4w-dev > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] snapping polygons together
Hi Ryan, This would be clunky but should do what you want:0) turn on editing for your grid layer1) select the feature you want to 'move'2) use the Translate tool a) check the 'Selected features only' check box b) enter the desired offset distance for the x and y axis i) this will be easy to calculate if your grid is regular ii) otherwise use the measure tool3) if the new feature meets your requirements a) delete the original, selected, feature from the grid b) select, copy (control + c) and paste (control + v) the translated feature to the grid layer4) save the grid layer -Thayer > Date: Tue, 23 Feb 2021 10:02:33 -0500 > From: Ryan Peel > To: qgis-user@lists.osgeo.org > Subject: [Qgis-user] snapping polygons together > Message-ID: > > Content-Type: text/plain; charset="utf-8" >I am making a grid layer and I want to copy/move some of them to 'lock' > into adjacent ones perfectly. Trying to avoid messing with the vertex > editor. zooming in close to the edges never gets it exact. I don't want > to drag the corner vertices and snap, I just want to move the whole polygon > and snap it to the edge of another. Maybe I'm missing something. > Sincerely, > Ryan ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Training in Canada
I have been approach by a couple of groups looking for QGIS training in Vancouver. Does anyone have any contacts there that might be interested in running some training workshops for geologists? Grant Boxer Perth, Western Australia ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS 3.18.0 and QGIS 3.14.4 (LTR) packages released and OSGeo4W reboot
>Long story short: you cannot upgrade from old installs and have to remove and >reinstall or use a separate directory. To make it even shorter, can you make a recommendation of what to do? If we don't need point clouds, can we just wait and eventually OSGEO4W will catch up, or are we going to eventually have to uninstall and reinstall anyway. On past evidence windows 10 will screw up all the default apps and icons if I uninstall and reinstall, so I'll probably wait if that is going to work eventually. Michael Dufty Senior Environmental Engineer ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
