Re: [Qgis-user] Difference in Area/Perimeter calculations
calculations*. Result (area, perimeter) by using >>>>>>> project and layer CRS is same (it should be), but result from using >>>>>>> ellipsoid option is different than these two. Is this difference >>>>>>> justifiable or not? (brad is providing a justification). >>>>>>> Regards >>>>>>> Harish >>>>>>> >>>>>>> On Tue, Jul 10, 2012 at 7:27 PM, Brad Nesom < >>>>>>> kidsmake6until2...@gmail.com> wrote: >>>>>>> >>>>>>>> All crs are mathematic approximations of a surface. Each with an >>>>>>>> acceptable distortion of either measurement (with aesthetic >>>>>>>> distortion) or >>>>>>>> acceptable aesthetic distortion (with measured distortion). For these >>>>>>>> reasons you should not expect two different projection systems to >>>>>>>> produce >>>>>>>> exact duplicate measurements. That is. Unless both systems are >>>>>>>> designed for >>>>>>>> accuracy. >>>>>>>> >>>>>>>> Brad Nesom GISP >>>>>>>> 580-616-2029 >>>>>>>> >>>>>>>> >>>>>>>> On Jul 10, 2012, at 2:30 AM, "G. Allegri" >>>>>>>> wrote: >>>>>>>> >>>>>>>> Hi Harish, >>>>>>>> how did you calculate the area/perimeter values? >>>>>>>> Could you provide us an excerpt of your data to test it? >>>>>>>> >>>>>>>> giovanni >>>>>>>> >>>>>>>> 2012/7/10 Harish >>>>>>>> >>>>>>>>> Yes, when ellipsoid is same, why there is a difference. >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> >>>>>>>>> On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood < >>>>>>>>> alister.h...@synergine.com> wrote: >>>>>>>>> >>>>>>>>>> Hi Harish, >>>>>>>>>> It's a little unclear - are you asking for an explanation of why >>>>>>>>>> there is a difference? >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> Alister >>>>>>>>>> >>>>>>>>>> > Date: Mon, 9 Jul 2012 13:03:05 +0530 >>>>>>>>>> > From: Harish >>>>>>>>>> > To: Qgis-user@lists.osgeo.org >>>>>>>>>> > Subject: [Qgis-user] Difference in Area/Perimeter calculations >>>>>>>>>> > Message-ID: >>>>>>>>>> > >>>>>>>>> ldqoo43bbivapod6jox2nb...@mail.gmail.com> >>>>>>>>>> > Content-Type: text/plain; charset="iso-8859-1" >>>>>>>>>> > >>>>>>>>>> > There is difference between area/perimeter calculations with >>>>>>>>>> ellipsoid and >>>>>>>>>> > project CRS. Attached is a screenshot in which first area and >>>>>>>>>> perimeter >>>>>>>>>> > columns are generated with tool 'Export/Add geometry columns' >>>>>>>>>> using >>>>>>>>>> > 'Ellipsoid' and second area and perimeter with using 'Project >>>>>>>>>> CRS' (used >>>>>>>>>> > 32643: UTM zone 43 North/WGS1984). >>>>>>>>>> > >>>>>>>>>> > Ellipsoid/Spheroid used in both cases is WGS84. >>>>>>>>>> > >>>>>>>>>> > QGIS1.8, Windows7. >>>>>>>>>> > >>>>>>>>>> > Regards >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> >>>>>>>>> >>>>>>> >>>>> >>>>> >>>> >>> >>> >>> -- >>> Harish Kumar Solanki, Assistant Professor >>> National Institute of Rural Development (NIRD), >>> Ministry of Rural Development, Government of India >>> Jaipur, Rajasthan, India- Pin-302006 >>> >>> Email- hksola...@nird.gov.in, harry.om2...@gmail.com, >>> Tele-Fax-0141-2209905, Mo.- 09214446732, 09414291732 >>> Website- http://www.nird.org.in, >>> http://watershed.rajasthan.gov.in/<http://www.nird.org.in> >>> LinkedIn: www.linkedIn.com/in/hksolanki >>> <http://www.nird.org.in> >>> >> >> > > > -- > Harish Kumar Solanki, Assistant Professor > National Institute of Rural Development (NIRD), > Ministry of Rural Development, Government of India > Jaipur, Rajasthan, India- Pin-302006 > > Email- hksola...@nird.gov.in, harry.om2...@gmail.com, > Tele-Fax-0141-2209905, Mo.- 09214446732, 09414291732 > Website- http://www.nird.org.in, > http://watershed.rajasthan.gov.in/<http://www.nird.org.in> > LinkedIn: www.linkedIn.com/in/hksolanki > <http://www.nird.org.in> > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Difference in Area/Perimeter calculations
ximations of a surface. Each with an >>>>>>> acceptable distortion of either measurement (with aesthetic distortion) >>>>>>> or >>>>>>> acceptable aesthetic distortion (with measured distortion). For these >>>>>>> reasons you should not expect two different projection systems to >>>>>>> produce >>>>>>> exact duplicate measurements. That is. Unless both systems are designed >>>>>>> for >>>>>>> accuracy. >>>>>>> >>>>>>> Brad Nesom GISP >>>>>>> 580-616-2029 >>>>>>> >>>>>>> >>>>>>> On Jul 10, 2012, at 2:30 AM, "G. Allegri" >>>>>>> wrote: >>>>>>> >>>>>>> Hi Harish, >>>>>>> how did you calculate the area/perimeter values? >>>>>>> Could you provide us an excerpt of your data to test it? >>>>>>> >>>>>>> giovanni >>>>>>> >>>>>>> 2012/7/10 Harish >>>>>>> >>>>>>>> Yes, when ellipsoid is same, why there is a difference. >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood < >>>>>>>> alister.h...@synergine.com> wrote: >>>>>>>> >>>>>>>>> Hi Harish, >>>>>>>>> It's a little unclear - are you asking for an explanation of why >>>>>>>>> there is a difference? >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Alister >>>>>>>>> >>>>>>>>> > Date: Mon, 9 Jul 2012 13:03:05 +0530 >>>>>>>>> > From: Harish >>>>>>>>> > To: Qgis-user@lists.osgeo.org >>>>>>>>> > Subject: [Qgis-user] Difference in Area/Perimeter calculations >>>>>>>>> > Message-ID: >>>>>>>>> > >>>>>>>> ldqoo43bbivapod6jox2nb...@mail.gmail.com> >>>>>>>>> > Content-Type: text/plain; charset="iso-8859-1" >>>>>>>>> > >>>>>>>>> > There is difference between area/perimeter calculations with >>>>>>>>> ellipsoid and >>>>>>>>> > project CRS. Attached is a screenshot in which first area and >>>>>>>>> perimeter >>>>>>>>> > columns are generated with tool 'Export/Add geometry columns' >>>>>>>>> using >>>>>>>>> > 'Ellipsoid' and second area and perimeter with using 'Project >>>>>>>>> CRS' (used >>>>>>>>> > 32643: UTM zone 43 North/WGS1984). >>>>>>>>> > >>>>>>>>> > Ellipsoid/Spheroid used in both cases is WGS84. >>>>>>>>> > >>>>>>>>> > QGIS1.8, Windows7. >>>>>>>>> > >>>>>>>>> > Regards >>>>>>>>> > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> >>>>>>>> >>>>>> >>>> >>>> >>> >> >> >> -- >> Harish Kumar Solanki, Assistant Professor >> National Institute of Rural Development (NIRD), >> Ministry of Rural Development, Government of India >> Jaipur, Rajasthan, India- Pin-302006 >> >> Email- hksola...@nird.gov.in, harry.om2...@gmail.com, >> Tele-Fax-0141-2209905, Mo.- 09214446732, 09414291732 >> Website- http://www.nird.org.in, >> http://watershed.rajasthan.gov.in/<http://www.nird.org.in> >> LinkedIn: www.linkedIn.com/in/hksolanki >> <http://www.nird.org.in> >> > > -- Harish Kumar Solanki, Assistant Professor National Institute of Rural Development (NIRD), Ministry of Rural Development, Government of India Jaipur, Rajasthan, India- Pin-302006 Email- hksola...@nird.gov.in, harry.om2...@gmail.com, Tele-Fax-0141-2209905, Mo.- 09214446732, 09414291732 Website- http://www.nird.org.in, http://watershed.rajasthan.gov.in/<http://www.nird.org.in> LinkedIn: www.linkedIn.com/in/hksolanki <http://www.nird.org.in> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Difference in Area/Perimeter calculations
I confirm what I wrote before. Measurements on ellipsoid is different then on a planar projection. This is not an "error", this is how geodesy is :) giovanni PS: and this is why there's the option to choose the ellipsoid you want to work with... 2012/7/11 Harish > So, to elaborate the tool and discussion, I have prepared a brief document > in word format for *Export/Add geometry columns* tool for better > understanding of tool and question. > > Paragraph written in bold and italic in document give hint to the query I > am discussing. > > Hope this will sufficient to clear the problem/query from my side. > > Editing/comments on document are welcome. > > Regards > > harish > > > > > On Wed, Jul 11, 2012 at 2:26 PM, G. Allegri wrote: > >> I'm sorry Harish but I cannot understand what are the steps you're doing. >> Probably a language problem :) >> >> First question. You added the area/perimeter fields and then did you >> filled them with the Field calculator (Geometry->$area method)? >> The Ellipsoid for measurment must be set to WGS84. >> You are measuring with the Layer CRS, WGS84, WGS84 with on the fly >> projection? >> And, how do you measure area precisely with the Measure Tool??? >> >> giovanni >> >> >> >> >> 2012/7/11 Harish >> >>> OK, This is not a big issue but we use *'Ellipsoidal' *measurements >>> in*'Measure tool' >>> * available with* Attribute tool bar,* in all projections. >>> >>> This is to be checked later, what effect it may put on precise >>> measurements and choices of measurement methods. >>> >>> Regards >>> Harish >>> >>> On Wed, Jul 11, 2012 at 11:58 AM, G. Allegri wrote: >>> >>>> So, the differences are between using/not using the Ellipsoid option? >>>> It's normal. Measurements on the ellipsoid are different then on a >>>> projected CRS. The first use geodesic metrics while the latter is a planar >>>> metrics. >>>> >>>> Giovanni >>>> >>>> Inviato da dispositivo mobile >>>> Il giorno 11/lug/2012 07.40, "Harish" ha >>>> scritto: >>>> >>>> Shape file is attached as Zipped to use. >>>>> I have used "*Vector>Geometry Tools>Export/Add Geometry colum*n" on >>>>> this file using LayerCRS, ProjectCRS (Both are UTM Zone 43N/WGS84 code >>>>> 32643), and Ellipsoid option which is also WGS84 in >>>>> *settings>options>maptools>ellipsoid >>>>> for distance calculations*. Result (area, perimeter) by using project >>>>> and layer CRS is same (it should be), but result from using ellipsoid >>>>> option is different than these two. Is this difference justifiable or not? >>>>> (brad is providing a justification). >>>>> Regards >>>>> Harish >>>>> >>>>> On Tue, Jul 10, 2012 at 7:27 PM, Brad Nesom < >>>>> kidsmake6until2...@gmail.com> wrote: >>>>> >>>>>> All crs are mathematic approximations of a surface. Each with an >>>>>> acceptable distortion of either measurement (with aesthetic distortion) >>>>>> or >>>>>> acceptable aesthetic distortion (with measured distortion). For these >>>>>> reasons you should not expect two different projection systems to produce >>>>>> exact duplicate measurements. That is. Unless both systems are designed >>>>>> for >>>>>> accuracy. >>>>>> >>>>>> Brad Nesom GISP >>>>>> 580-616-2029 >>>>>> >>>>>> >>>>>> On Jul 10, 2012, at 2:30 AM, "G. Allegri" wrote: >>>>>> >>>>>> Hi Harish, >>>>>> how did you calculate the area/perimeter values? >>>>>> Could you provide us an excerpt of your data to test it? >>>>>> >>>>>> giovanni >>>>>> >>>>>> 2012/7/10 Harish >>>>>> >>>>>>> Yes, when ellipsoid is same, why there is a difference. >>>>>>> >>>>>>> Regards >>>>>>> >>>>>>> On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood < >>>>>>> alister.h...@synergine.com> wrote: >>>>>>> >>>>>>>&g
Re: [Qgis-user] Difference in Area/Perimeter calculations
I'm sorry Harish but I cannot understand what are the steps you're doing. Probably a language problem :) First question. You added the area/perimeter fields and then did you filled them with the Field calculator (Geometry->$area method)? The Ellipsoid for measurment must be set to WGS84. You are measuring with the Layer CRS, WGS84, WGS84 with on the fly projection? And, how do you measure area precisely with the Measure Tool??? giovanni 2012/7/11 Harish > OK, This is not a big issue but we use *'Ellipsoidal' *measurements > in*'Measure tool' > * available with* Attribute tool bar,* in all projections. > > This is to be checked later, what effect it may put on precise > measurements and choices of measurement methods. > > Regards > Harish > > On Wed, Jul 11, 2012 at 11:58 AM, G. Allegri wrote: > >> So, the differences are between using/not using the Ellipsoid option? >> It's normal. Measurements on the ellipsoid are different then on a >> projected CRS. The first use geodesic metrics while the latter is a planar >> metrics. >> >> Giovanni >> >> Inviato da dispositivo mobile >> Il giorno 11/lug/2012 07.40, "Harish" ha >> scritto: >> >> Shape file is attached as Zipped to use. >>> I have used "*Vector>Geometry Tools>Export/Add Geometry colum*n" on >>> this file using LayerCRS, ProjectCRS (Both are UTM Zone 43N/WGS84 code >>> 32643), and Ellipsoid option which is also WGS84 in >>> *settings>options>maptools>ellipsoid >>> for distance calculations*. Result (area, perimeter) by using project >>> and layer CRS is same (it should be), but result from using ellipsoid >>> option is different than these two. Is this difference justifiable or not? >>> (brad is providing a justification). >>> Regards >>> Harish >>> >>> On Tue, Jul 10, 2012 at 7:27 PM, Brad Nesom < >>> kidsmake6until2...@gmail.com> wrote: >>> >>>> All crs are mathematic approximations of a surface. Each with an >>>> acceptable distortion of either measurement (with aesthetic distortion) or >>>> acceptable aesthetic distortion (with measured distortion). For these >>>> reasons you should not expect two different projection systems to produce >>>> exact duplicate measurements. That is. Unless both systems are designed for >>>> accuracy. >>>> >>>> Brad Nesom GISP >>>> 580-616-2029 >>>> >>>> >>>> On Jul 10, 2012, at 2:30 AM, "G. Allegri" wrote: >>>> >>>> Hi Harish, >>>> how did you calculate the area/perimeter values? >>>> Could you provide us an excerpt of your data to test it? >>>> >>>> giovanni >>>> >>>> 2012/7/10 Harish >>>> >>>>> Yes, when ellipsoid is same, why there is a difference. >>>>> >>>>> Regards >>>>> >>>>> On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood < >>>>> alister.h...@synergine.com> wrote: >>>>> >>>>>> Hi Harish, >>>>>> It's a little unclear - are you asking for an explanation of why >>>>>> there is a difference? >>>>>> >>>>>> Regards, >>>>>> Alister >>>>>> >>>>>> > Date: Mon, 9 Jul 2012 13:03:05 +0530 >>>>>> > From: Harish >>>>>> > To: Qgis-user@lists.osgeo.org >>>>>> > Subject: [Qgis-user] Difference in Area/Perimeter calculations >>>>>> > Message-ID: >>>>>> > >>>>> ldqoo43bbivapod6jox2nb...@mail.gmail.com> >>>>>> > Content-Type: text/plain; charset="iso-8859-1" >>>>>> > >>>>>> > There is difference between area/perimeter calculations with >>>>>> ellipsoid and >>>>>> > project CRS. Attached is a screenshot in which first area and >>>>>> perimeter >>>>>> > columns are generated with tool 'Export/Add geometry columns' using >>>>>> > 'Ellipsoid' and second area and perimeter with using 'Project CRS' >>>>>> (used >>>>>> > 32643: UTM zone 43 North/WGS1984). >>>>>> > >>>>>> > Ellipsoid/Spheroid used in both cases is WGS84. >>>>>> > >>>>>> > QGIS1.8, Windows7. >>>>>> > >>>>>> > Regards >>>>>> > >>>>>> > >>>>>> > >>>>>> >>>>> >>> > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Difference in Area/Perimeter calculations
OK, This is not a big issue but we use *'Ellipsoidal' *measurements in*'Measure tool' * available with* Attribute tool bar,* in all projections. This is to be checked later, what effect it may put on precise measurements and choices of measurement methods. Regards Harish On Wed, Jul 11, 2012 at 11:58 AM, G. Allegri wrote: > So, the differences are between using/not using the Ellipsoid option? It's > normal. Measurements on the ellipsoid are different then on a projected > CRS. The first use geodesic metrics while the latter is a planar metrics. > > Giovanni > > Inviato da dispositivo mobile > Il giorno 11/lug/2012 07.40, "Harish" ha scritto: > > Shape file is attached as Zipped to use. >> I have used "*Vector>Geometry Tools>Export/Add Geometry colum*n" on this >> file using LayerCRS, ProjectCRS (Both are UTM Zone 43N/WGS84 code 32643), >> and Ellipsoid option which is also WGS84 in >> *settings>options>maptools>ellipsoid >> for distance calculations*. Result (area, perimeter) by using project >> and layer CRS is same (it should be), but result from using ellipsoid >> option is different than these two. Is this difference justifiable or not? >> (brad is providing a justification). >> Regards >> Harish >> >> On Tue, Jul 10, 2012 at 7:27 PM, Brad Nesom > > wrote: >> >>> All crs are mathematic approximations of a surface. Each with an >>> acceptable distortion of either measurement (with aesthetic distortion) or >>> acceptable aesthetic distortion (with measured distortion). For these >>> reasons you should not expect two different projection systems to produce >>> exact duplicate measurements. That is. Unless both systems are designed for >>> accuracy. >>> >>> Brad Nesom GISP >>> 580-616-2029 >>> >>> >>> On Jul 10, 2012, at 2:30 AM, "G. Allegri" wrote: >>> >>> Hi Harish, >>> how did you calculate the area/perimeter values? >>> Could you provide us an excerpt of your data to test it? >>> >>> giovanni >>> >>> 2012/7/10 Harish >>> >>>> Yes, when ellipsoid is same, why there is a difference. >>>> >>>> Regards >>>> >>>> On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood < >>>> alister.h...@synergine.com> wrote: >>>> >>>>> Hi Harish, >>>>> It's a little unclear - are you asking for an explanation of why there >>>>> is a difference? >>>>> >>>>> Regards, >>>>> Alister >>>>> >>>>> > Date: Mon, 9 Jul 2012 13:03:05 +0530 >>>>> > From: Harish >>>>> > To: Qgis-user@lists.osgeo.org >>>>> > Subject: [Qgis-user] Difference in Area/Perimeter calculations >>>>> > Message-ID: >>>>> > >>>> ldqoo43bbivapod6jox2nb...@mail.gmail.com> >>>>> > Content-Type: text/plain; charset="iso-8859-1" >>>>> > >>>>> > There is difference between area/perimeter calculations with >>>>> ellipsoid and >>>>> > project CRS. Attached is a screenshot in which first area and >>>>> perimeter >>>>> > columns are generated with tool 'Export/Add geometry columns' using >>>>> > 'Ellipsoid' and second area and perimeter with using 'Project CRS' >>>>> (used >>>>> > 32643: UTM zone 43 North/WGS1984). >>>>> > >>>>> > Ellipsoid/Spheroid used in both cases is WGS84. >>>>> > >>>>> > QGIS1.8, Windows7. >>>>> > >>>>> > Regards >>>>> > >>>>> > >>>>> > >>>>> >>>> >> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Difference in Area/Perimeter calculations
So, the differences are between using/not using the Ellipsoid option? It's normal. Measurements on the ellipsoid are different then on a projected CRS. The first use geodesic metrics while the latter is a planar metrics. Giovanni Inviato da dispositivo mobile Il giorno 11/lug/2012 07.40, "Harish" ha scritto: > Shape file is attached as Zipped to use. > I have used "*Vector>Geometry Tools>Export/Add Geometry colum*n" on this > file using LayerCRS, ProjectCRS (Both are UTM Zone 43N/WGS84 code 32643), > and Ellipsoid option which is also WGS84 in > *settings>options>maptools>ellipsoid > for distance calculations*. Result (area, perimeter) by using project and > layer CRS is same (it should be), but result from using ellipsoid option is > different than these two. Is this difference justifiable or not? (brad is > providing a justification). > Regards > Harish > > On Tue, Jul 10, 2012 at 7:27 PM, Brad Nesom > wrote: > >> All crs are mathematic approximations of a surface. Each with an >> acceptable distortion of either measurement (with aesthetic distortion) or >> acceptable aesthetic distortion (with measured distortion). For these >> reasons you should not expect two different projection systems to produce >> exact duplicate measurements. That is. Unless both systems are designed for >> accuracy. >> >> Brad Nesom GISP >> 580-616-2029 >> >> >> On Jul 10, 2012, at 2:30 AM, "G. Allegri" wrote: >> >> Hi Harish, >> how did you calculate the area/perimeter values? >> Could you provide us an excerpt of your data to test it? >> >> giovanni >> >> 2012/7/10 Harish >> >>> Yes, when ellipsoid is same, why there is a difference. >>> >>> Regards >>> >>> On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood < >>> alister.h...@synergine.com> wrote: >>> >>>> Hi Harish, >>>> It's a little unclear - are you asking for an explanation of why there >>>> is a difference? >>>> >>>> Regards, >>>> Alister >>>> >>>> > Date: Mon, 9 Jul 2012 13:03:05 +0530 >>>> > From: Harish >>>> > To: Qgis-user@lists.osgeo.org >>>> > Subject: [Qgis-user] Difference in Area/Perimeter calculations >>>> > Message-ID: >>>> > >>> ldqoo43bbivapod6jox2nb...@mail.gmail.com> >>>> > Content-Type: text/plain; charset="iso-8859-1" >>>> > >>>> > There is difference between area/perimeter calculations with >>>> ellipsoid and >>>> > project CRS. Attached is a screenshot in which first area and >>>> perimeter >>>> > columns are generated with tool 'Export/Add geometry columns' using >>>> > 'Ellipsoid' and second area and perimeter with using 'Project CRS' >>>> (used >>>> > 32643: UTM zone 43 North/WGS1984). >>>> > >>>> > Ellipsoid/Spheroid used in both cases is WGS84. >>>> > >>>> > QGIS1.8, Windows7. >>>> > >>>> > Regards >>>> > >>>> > >>>> > >>>> >>> > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Difference in Area/Perimeter calculations
Hi Harish, how did you calculate the area/perimeter values? Could you provide us an excerpt of your data to test it? giovanni 2012/7/10 Harish > Yes, when ellipsoid is same, why there is a difference. > > Regards > > On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood > wrote: > >> Hi Harish, >> It's a little unclear - are you asking for an explanation of why there is >> a difference? >> >> Regards, >> Alister >> >> > Date: Mon, 9 Jul 2012 13:03:05 +0530 >> > From: Harish >> > To: Qgis-user@lists.osgeo.org >> > Subject: [Qgis-user] Difference in Area/Perimeter calculations >> > Message-ID: >> > > ldqoo43bbivapod6jox2nb...@mail.gmail.com> >> > Content-Type: text/plain; charset="iso-8859-1" >> > >> > There is difference between area/perimeter calculations with ellipsoid >> and >> > project CRS. Attached is a screenshot in which first area and perimeter >> > columns are generated with tool 'Export/Add geometry columns' using >> > 'Ellipsoid' and second area and perimeter with using 'Project CRS' (used >> > 32643: UTM zone 43 North/WGS1984). >> > >> > Ellipsoid/Spheroid used in both cases is WGS84. >> > >> > QGIS1.8, Windows7. >> > >> > Regards >> > >> > >> > -- >> > Harish Kumar Solanki, Assistant Professor >> > National Institute of Rural Development (NIRD), >> > Ministry of Rural Development, Government of India >> > Jaipur, Rajasthan, India- Pin-302006 >> > > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Difference in Area/Perimeter calculations
Yes, when ellipsoid is same, why there is a difference. Regards On Tue, Jul 10, 2012 at 10:57 AM, Alister Hood wrote: > Hi Harish, > It's a little unclear - are you asking for an explanation of why there is > a difference? > > Regards, > Alister > > > Date: Mon, 9 Jul 2012 13:03:05 +0530 > > From: Harish > > To: Qgis-user@lists.osgeo.org > > Subject: [Qgis-user] Difference in Area/Perimeter calculations > > Message-ID: > > ldqoo43bbivapod6jox2nb...@mail.gmail.com> > > Content-Type: text/plain; charset="iso-8859-1" > > > > There is difference between area/perimeter calculations with ellipsoid > and > > project CRS. Attached is a screenshot in which first area and perimeter > > columns are generated with tool 'Export/Add geometry columns' using > > 'Ellipsoid' and second area and perimeter with using 'Project CRS' (used > > 32643: UTM zone 43 North/WGS1984). > > > > Ellipsoid/Spheroid used in both cases is WGS84. > > > > QGIS1.8, Windows7. > > > > Regards > > > > > > -- > > Harish Kumar Solanki, Assistant Professor > > National Institute of Rural Development (NIRD), > > Ministry of Rural Development, Government of India > > Jaipur, Rajasthan, India- Pin-302006 > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Difference in Area/Perimeter calculations
Hi Harish, It's a little unclear - are you asking for an explanation of why there is a difference? Regards, Alister > Date: Mon, 9 Jul 2012 13:03:05 +0530 > From: Harish > To: Qgis-user@lists.osgeo.org > Subject: [Qgis-user] Difference in Area/Perimeter calculations > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > There is difference between area/perimeter calculations with ellipsoid and > project CRS. Attached is a screenshot in which first area and perimeter > columns are generated with tool 'Export/Add geometry columns' using > 'Ellipsoid' and second area and perimeter with using 'Project CRS' (used > 32643: UTM zone 43 North/WGS1984). > > Ellipsoid/Spheroid used in both cases is WGS84. > > QGIS1.8, Windows7. > > Regards > > > -- > Harish Kumar Solanki, Assistant Professor > National Institute of Rural Development (NIRD), > Ministry of Rural Development, Government of India > Jaipur, Rajasthan, India- Pin-302006 ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
