Re: [Qgis-user] QGIS 6.3 for macOS 10.14.5 : HELP

2019-05-21 Thread Ramon Andinach 
Hi Nuno,

Glad it’s mostly working.

QGIS (and its tools) slowly gets better at noticing invalid layers, and there 
are a lot of changes between these two versions. I’d  run one of the geometry 
checkers over your layer, eg.  Vector -> Geometry Tools -> Check Validity, and 
see if that shows up anything.
If that doesn’t show anything I'm probably out, but maybe one of the others 
could help as this isn’t a Mac specific error.

Regards,
Ramon.

> On 22 May 2019, at 09:07, Nuno Manuel de Figueiredo de Santos Loureiro 
>  wrote:
> 
> Hi Ramon,
> 
> Many thanks.
> I followed your recommendations.
> However a few issues remain.
> William wrotes:
> /Library/Frameworks/Python.framework/Versions/3.6/bin:/Library/Frameworks/GDAL.framework/Versions/2.3/Programs:
> in the step by step
> But he also says that GDAL is 2.4 and not 2.3.
> 
> I checked in my computar and I have GDAL 1.11, 2.1, GDAL 2.2 and GDAL 2.4.
> I believe that GDAL 1.11 and 2.1 is needed for QGIS 2.18.23, that GDAL 2.2 is 
> not needed and that GDAL 2.4 is needed for QGIS 3.6.2.
> Is this true?
> 
> After, I changed the above line to
> /Library/Frameworks/Python.framework/Versions/3.6/bin:/Library/Frameworks/GDAL.framework/Versions/2.4/Programs:
> (only 2.3 to 2.4)
> 
> Finally the Merge a few rasters works well ;-)
> 
> But the following step, the Clip a raster using a mask layer is not working.
> Instead I received the following message:
> 
> ERROR 1: Cutline polygon is invalid.
> 
> Note that the same task (Clip a raster using a mask layer) in QGIS 2.18.23 
> (using the same input layers) runs without any kind of troubles.
> 
> Ramon, have you any additional suggestions???
> 
> many thanks for your attention,
> 
> Nuno
>  
> -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
> Nuno de Santos Loureiro (PhD)
> Faculdade de Ciências e Tecnologia - DCTMA - Ed. 8
> Universidade do Algarve
> Campus de Gambelas
> 8005-139 FARO   (Portugal)
> -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
> From: Ramon Andinach 
> Sent: 22 May 2019 00:43
> To: Nuno Manuel de Figueiredo de Santos Loureiro
> Cc: qgis-user
> Subject: Re: [Qgis-user] QGIS 6.3 for macOS 10.14.5 : HELP
>  
> Hi Nuno,
> 
> You need to set some environmental variables, so that the GDAL binaries can 
> be found.
> William provides a nice step by step in file Read Me.txt
> 
> If you’ve already deleted the dmg I’ll paste it into a reply, but you should 
> read Read Me.txt because it contains other useful bits of information besides 
> the answer to your question.
> 
> Regards,
> Ramon.
> 
>> On 22 May 2019, at 07:14, Nuno Manuel de Figueiredo de Santos Loureiro 
>> mailto:nlou...@ualg.pt>> wrote:
>> 
>> Hi all,
>> 
>> I'm a very regular (happy) user of QGIS 2.18.23.
>> Recently I installed QGIS 6.3.2 on my Mac with macOS 10.14.5.
>> Several tasks are running very well but when I tried to merge a few rasters 
>> I was not able to do that and I received the following message:
>> 
>> GDAL command output:
>> /bin/sh: gdal_merge.py: command not found
>> 
>> Also, when I tried to clip a raster using a mask layer I was not able to do 
>> that and I received the following message:
>> 
>> GDAL command output:
>> /bin/sh: gdalwarp: command not found
>> 
>> What is missing or wrong?
>> Can somebody help me with some tips to fix this issue?
>> 
>> Many thanks in advance, 
>> 
>> Nuno
>>  
>> -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
>> Nuno de Santos Loureiro (PhD)
>> Faculdade de Ciências e Tecnologia - DCTMA - Ed. 8
>> Universidade do Algarve
>> Campus de Gambelas
>> 8005-139 FARO   (Portugal)
>> -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org <mailto:Qgis-user@lists.osgeo.org>
>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user 
>> <https://lists.osgeo.org/mailman/listinfo/qgis-user>
>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user 
>> <https://lists.osgeo.org/mailman/listinfo/qgis-user>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 6.3 for macOS 10.14.5 : HELP

2019-05-21 Thread Nuno Manuel de Figueiredo de Santos Loureiro 
Hi Ramon,

Many thanks.
I followed your recommendations.
However a few issues remain.
William wrotes:

/Library/Frameworks/Python.framework/Versions/3.6/bin:/Library/Frameworks/GDAL.framework/Versions/2.3/Programs:

in the step by step
But he also says that GDAL is 2.4 and not 2.3.

I checked in my computar and I have GDAL 1.11, 2.1, GDAL 2.2 and GDAL 2.4.
I believe that GDAL 1.11 and 2.1 is needed for QGIS 2.18.23, that GDAL 2.2 is 
not needed and that GDAL 2.4 is needed for QGIS 3.6.2.
Is this true?

After, I changed the above line to

/Library/Frameworks/Python.framework/Versions/3.6/bin:/Library/Frameworks/GDAL.framework/Versions/2.4/Programs:

(only 2.3 to 2.4)

Finally the Merge a few rasters works well ;-)

But the following step, the Clip a raster using a mask layer is not working.
Instead I received the following message:

ERROR 1: Cutline polygon is invalid.


Note that the same task (Clip a raster using a mask layer) in QGIS 2.18.23 
(using the same input layers) runs without any kind of troubles.


Ramon, have you any additional suggestions???


many thanks for your attention,


Nuno



-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-

Nuno de Santos Loureiro (PhD)

Faculdade de Ciências e Tecnologia - DCTMA - Ed. 8

Universidade do Algarve

Campus de Gambelas

8005-139 FARO   (Portugal)

-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-


From: Ramon Andinach 
Sent: 22 May 2019 00:43
To: Nuno Manuel de Figueiredo de Santos Loureiro
Cc: qgis-user
Subject: Re: [Qgis-user] QGIS 6.3 for macOS 10.14.5 : HELP

Hi Nuno,

You need to set some environmental variables, so that the GDAL binaries can be 
found.
William provides a nice step by step in file Read Me.txt

If you’ve already deleted the dmg I’ll paste it into a reply, but you should 
read Read Me.txt because it contains other useful bits of information besides 
the answer to your question.

Regards,
Ramon.

On 22 May 2019, at 07:14, Nuno Manuel de Figueiredo de Santos Loureiro 
mailto:nlou...@ualg.pt>> wrote:

Hi all,

I'm a very regular (happy) user of QGIS 2.18.23.
Recently I installed QGIS 6.3.2 on my Mac with macOS 10.14.5.
Several tasks are running very well but when I tried to merge a few rasters I 
was not able to do that and I received the following message:

GDAL command output:
/bin/sh: gdal_merge.py: command not found

Also, when I tried to clip a raster using a mask layer I was not able to do 
that and I received the following message:

GDAL command output:
/bin/sh: gdalwarp: command not found

What is missing or wrong?
Can somebody help me with some tips to fix this issue?

Many thanks in advance,

Nuno



-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
Nuno de Santos Loureiro (PhD)
Faculdade de Ciências e Tecnologia - DCTMA - Ed. 8
Universidade do Algarve
Campus de Gambelas
8005-139 FARO   (Portugal)
-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org<mailto:Qgis-user@lists.osgeo.org>
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS 6.3 for macOS 10.14.5 : HELP

2019-05-21 Thread Ramon Andinach 
Hi Nuno,

You need to set some environmental variables, so that the GDAL binaries can be 
found.
William provides a nice step by step in file Read Me.txt

If you’ve already deleted the dmg I’ll paste it into a reply, but you should 
read Read Me.txt because it contains other useful bits of information besides 
the answer to your question.

Regards,
Ramon.

> On 22 May 2019, at 07:14, Nuno Manuel de Figueiredo de Santos Loureiro 
>  wrote:
> 
> Hi all,
> 
> I'm a very regular (happy) user of QGIS 2.18.23.
> Recently I installed QGIS 6.3.2 on my Mac with macOS 10.14.5.
> Several tasks are running very well but when I tried to merge a few rasters I 
> was not able to do that and I received the following message:
> 
> GDAL command output:
> /bin/sh: gdal_merge.py: command not found
> 
> Also, when I tried to clip a raster using a mask layer I was not able to do 
> that and I received the following message:
> 
> GDAL command output:
> /bin/sh: gdalwarp: command not found
> 
> What is missing or wrong?
> Can somebody help me with some tips to fix this issue?
> 
> Many thanks in advance, 
> 
> Nuno
>  
> -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
> Nuno de Santos Loureiro (PhD)
> Faculdade de Ciências e Tecnologia - DCTMA - Ed. 8
> Universidade do Algarve
> Campus de Gambelas
> 8005-139 FARO   (Portugal)
> -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org 
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user 
> 
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user 
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] QGIS 6.3 for macOS 10.14.5 : HELP

2019-05-21 Thread Nuno Manuel de Figueiredo de Santos Loureiro 
Hi all,

I'm a very regular (happy) user of QGIS 2.18.23.
Recently I installed QGIS 6.3.2 on my Mac with macOS 10.14.5.
Several tasks are running very well but when I tried to merge a few rasters I 
was not able to do that and I received the following message:

GDAL command output:
/bin/sh: gdal_merge.py: command not found

Also, when I tried to clip a raster using a mask layer I was not able to do 
that and I received the following message:

GDAL command output:
/bin/sh: gdalwarp: command not found


What is missing or wrong?

Can somebody help me with some tips to fix this issue?


Many thanks in advance,


Nuno



-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-

Nuno de Santos Loureiro (PhD)

Faculdade de Ciências e Tecnologia - DCTMA - Ed. 8

Universidade do Algarve

Campus de Gambelas

8005-139 FARO   (Portugal)

-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user