[Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31
Using 1.7.2, the scale bar is on degrees while project and layer CRS are projected. See screenshot here: https://sites.google.com/site/filestemp2/home/scalebar.jpeg?attredirects=0 Agus ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31
Oh look, I just had that happen on an osgeo install. -ramon. On 29/11/2011, at 14:51, Agustin Lobo wrote: > Using 1.7.2, the scale bar is on degrees while project and > layer CRS are projected. See screenshot here: > https://sites.google.com/site/filestemp2/home/scalebar.jpeg?attredirects=0 > > Agus > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31
It is a known issue in 1.7.2. It was already fixed in master/trunk and the fix should be backported to next release. cheers -- Giovanni -- On Tue, 2011-11-29 at 15:17 +0800, Ramon Andiñach wrote: > Oh look, I just had that happen on an osgeo install. > > -ramon. > > On 29/11/2011, at 14:51, Agustin Lobo wrote: > > > Using 1.7.2, the scale bar is on degrees while project and > > layer CRS are projected. See screenshot here: > > https://sites.google.com/site/filestemp2/home/scalebar.jpeg?attredirects=0 > > > > Agus > > ___ > > Qgis-user mailing list > > Qgis-user@lists.osgeo.org > > http://lists.osgeo.org/mailman/listinfo/qgis-user > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
RE: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31
The same happened to me in a win stadnallone install on xp, vista and 7 and ubuntu. Main thing, scale bar seem not to work well on 1.72. Nevertheless, I check if I coul use the measure tool and make a reprojection of som layers in UTM wgs84 14N and both procedures work ok. Then, Qgis recognizes my CRS, but the scale bar does not work. I get around this by getting rid off the scale bar. Not a total solution but it works. and the only thing is to get use to work without the scale bar in the data frame. Hope it helps Gerardo Jiménez Delgado Instituto de Investigaciones Antropológicas Universidad Nacional Autónoma de México Ciudad Universitaria s/n Coyoacan 04510 Mexico City Mexico 56 22 95 16 > Date: Tue, 29 Nov 2011 07:51:27 +0100 > From: alobolis...@gmail.com > To: qgis-user@lists.osgeo.org > Subject: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31 > > Using 1.7.2, the scale bar is on degrees while project and > layer CRS are projected. See screenshot here: > https://sites.google.com/site/filestemp2/home/scalebar.jpeg?attredirects=0 > > Agus > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31
Hi, you could try to set Layer Units in menu Settings -> Project Properties -> General tab to Meters. Usually this should be done automatically, based on the units of the CRS you select. Maybe that doesn't work? Regards Otto Am Tue, 29 Nov 2011 09:13:48 -0500 schrieb Gerardo Jimenez : > > The same happened to me in a win stadnallone install on xp, vista and 7 > and ubuntu. Main thing, scale bar seem not to work well on 1.72. > Nevertheless, I check if I coul use the measure tool and make a > reprojection of som layers in UTM wgs84 14N and both procedures work ok. > Then, Qgis recognizes my CRS, but the scale bar does not work. I get > around this by getting rid off the scale bar. Not a total solution but it > works. and the only thing is to get use to work without the scale bar in > the data frame. > > Hope it helps > > Gerardo Jiménez Delgado > Instituto de Investigaciones Antropológicas > Universidad Nacional Autónoma de México > Ciudad Universitaria s/n > Coyoacan 04510 > Mexico City > Mexico > > 56 22 95 16 > > > Date: Tue, 29 Nov 2011 07:51:27 +0100 > > From: alobolis...@gmail.com > > To: qgis-user@lists.osgeo.org > > Subject: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31 > > > > Using 1.7.2, the scale bar is on degrees while project and > > layer CRS are projected. See screenshot here: > > https://sites.google.com/site/filestemp2/home/scalebar.jpeg?attredirects=0 > > > > Agus > > ___ > > Qgis-user mailing list > > Qgis-user@lists.osgeo.org > > http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31
It works here (on ubuntu). It seems the only bug is just that the units are not automatically set to the units of the CRS. Agus 2011/11/29 Otto Dassau : > Hi, > > you could try to set Layer Units in menu Settings -> Project Properties -> > General tab to Meters. Usually this should be done automatically, based on > the units of the CRS you select. Maybe that doesn't work? > > Regards > Otto > > Am Tue, 29 Nov 2011 09:13:48 -0500 > schrieb Gerardo Jimenez : > >> >> The same happened to me in a win stadnallone install on xp, vista and 7 >> and ubuntu. Main thing, scale bar seem not to work well on 1.72. >> Nevertheless, I check if I coul use the measure tool and make a >> reprojection of som layers in UTM wgs84 14N and both procedures work ok. >> Then, Qgis recognizes my CRS, but the scale bar does not work. I get >> around this by getting rid off the scale bar. Not a total solution but it >> works. and the only thing is to get use to work without the scale bar in >> the data frame. >> >> Hope it helps >> >> Gerardo Jiménez Delgado >> Instituto de Investigaciones Antropológicas >> Universidad Nacional Autónoma de México >> Ciudad Universitaria s/n >> Coyoacan 04510 >> Mexico City >> Mexico >> >> 56 22 95 16 >> >> > Date: Tue, 29 Nov 2011 07:51:27 +0100 >> > From: alobolis...@gmail.com >> > To: qgis-user@lists.osgeo.org >> > Subject: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31 >> > >> > Using 1.7.2, the scale bar is on degrees while project and >> > layer CRS are projected. See screenshot here: >> > https://sites.google.com/site/filestemp2/home/scalebar.jpeg?attredirects=0 >> > >> > Agus >> > ___ >> > Qgis-user mailing list >> > Qgis-user@lists.osgeo.org >> > http://lists.osgeo.org/mailman/listinfo/qgis-user > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
RE: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31
Works on windows too!!! Thanks for the advice! Gerardo Jiménez Delgado Instituto de Investigaciones Antropológicas Universidad Nacional Autónoma de México Ciudad Universitaria s/n Coyoacan 04510 Mexico City Mexico 56 22 95 16 > Date: Tue, 29 Nov 2011 15:33:17 +0100 > Subject: Re: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31 > From: alobolis...@gmail.com > To: das...@gbd-consult.de > CC: qgis-user@lists.osgeo.org > > It works here (on ubuntu). It seems the only bug is just that the > units are not automatically set to > the units of the CRS. > Agus > > 2011/11/29 Otto Dassau : > > Hi, > > > > you could try to set Layer Units in menu Settings -> Project Properties -> > > General tab to Meters. Usually this should be done automatically, based on > > the units of the CRS you select. Maybe that doesn't work? > > > > Regards > > Otto > > > > Am Tue, 29 Nov 2011 09:13:48 -0500 > > schrieb Gerardo Jimenez : > > > >> > >> The same happened to me in a win stadnallone install on xp, vista and 7 > >> and ubuntu. Main thing, scale bar seem not to work well on 1.72. > >> Nevertheless, I check if I coul use the measure tool and make a > >> reprojection of som layers in UTM wgs84 14N and both procedures work ok. > >> Then, Qgis recognizes my CRS, but the scale bar does not work. I get > >> around this by getting rid off the scale bar. Not a total solution but it > >> works. and the only thing is to get use to work without the scale bar in > >> the data frame. > >> > >> Hope it helps > >> > >> Gerardo Jiménez Delgado > >> Instituto de Investigaciones Antropológicas > >> Universidad Nacional Autónoma de México > >> Ciudad Universitaria s/n > >> Coyoacan 04510 > >> Mexico City > >> Mexico > >> > >> 56 22 95 16 > >> > >> > Date: Tue, 29 Nov 2011 07:51:27 +0100 > >> > From: alobolis...@gmail.com > >> > To: qgis-user@lists.osgeo.org > >> > Subject: [Qgis-user] Scale bar on degrees with project CRS on ED50 UTM31 > >> > > >> > Using 1.7.2, the scale bar is on degrees while project and > >> > layer CRS are projected. See screenshot here: > >> > https://sites.google.com/site/filestemp2/home/scalebar.jpeg?attredirects=0 > >> > > >> > Agus > >> > ___ > >> > Qgis-user mailing list > >> > Qgis-user@lists.osgeo.org > >> > http://lists.osgeo.org/mailman/listinfo/qgis-user > > > > ___ > > Qgis-user mailing list > > Qgis-user@lists.osgeo.org > > http://lists.osgeo.org/mailman/listinfo/qgis-user > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user