Re: [Qgis-user] Shapefiles

[Nicolas Cadieux]

I agree,

Unless someone actually when true the trouble of story the geometry in the 
database.  Look for x an y columns for point or a geometry column or a WKT 
format.  If so, you could recreate the geometry from that information.  But 
chances are you have no such data in the databas.

Nicolas Cadieux
https://gitlab.com/njacadieux

> Le 8 avr. 2021 à 08:14, Andreas Neumann  a écrit :
> 
> 
> Hi Paddy,
> 
> The .shp file contains the geometries. If your data contains no geometries, 
> then you might be fine with the .dbf file that contains the no-geometry part 
> of your data (attribute columns). No - it is not possible to recreate the 
> .shp file if it is missing.
> 
> Andreas
> 
>> On 2021-04-08 14:07, Pat Brown wrote:
>> 
>> Hi,
>>So, just to confirm what I already suspect? If you have the .shx and .dbf 
>> files but the .shp file is missing then you might as well get rid of them? 
>> It is not possible to recreate the .shp file?
>>  
>> Thanks,
>>  
>> Paddy 
>> 
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Shapefiles

[Andreas Neumann]

Hi Paddy,

The .shp file contains the geometries. If your data contains no 
geometries, then you might be fine with the .dbf file that contains the 
no-geometry part of your data (attribute columns). No - it is not 
possible to recreate the .shp file if it is missing.


Andreas

On 2021-04-08 14:07, Pat Brown wrote:


Hi,
So, just to confirm what I already suspect? If you have the .shx and 
.dbf files but the .shp file is missing then you might as well get rid 
of them? It is not possible to recreate the .shp file?


Thanks,

Paddy
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Shapefiles

[Pat Brown]

Hi,
   So, just to confirm what I already suspect? If you have the .shx and
.dbf files but the .shp file is missing then you might as well get rid of
them? It is not possible to recreate the .shp file?

Thanks,

Paddy
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Jim McGannon]

Thank you all for responding. I got it now.Jim From: Randal HaleSent: Tuesday, June 16, 2020 6:29 AMTo: qgis-user@lists.osgeo.org; forestermcgan...@gmail.comCc: r.nijs...@terglobo.nlSubject: Re: [Qgis-user] shapefiles Yeah - that's a layer order issue. Just drag that line above your ortho over in the layers panel. Select the layer and drag it up. You can move stuff around pretty easily in that panel. If you ever dump a shapefile out of some custom Forestry software it could (like something to COGO boundaries or do cruises) it can become a projection issue easily. BUT - you're on the right track! Randy On 6/16/20 2:08 AM, Raymond Nijssen wrote:> Ah, you'll need to change the layer order. Just drag and drop them at > the right spot in the layer panel, left from your map.> > This is actually quite basic qgis knowledge, so you might consider > following some (online) tutorials to get started quickly.> > Regards,> Raymond> > > > On 16-06-2020 07:55, forestermcgannon wrote:>> when I "uncheck" the ortho layer, the property boundary (the >> shapefile) appears. When I display the ortho imagery again, no >> boundary. It is like the shapefile is "under" the ortho image, when I >> of course want it to show "on" the ortho image. most seems like a >> vector display issue to me.>> What do you think?>> Thanks>> Jim>> >> >> >> Jim McGannon>> Forestry Landscape Consultant, LLC>> Coloradotreearborist.com>> 303-526-1118>> >> >>  Original message >> From: Raymond Nijssen >> Date: 6/15/20 11:35 PM (GMT-07:00)>> To: qgis-user@lists.osgeo.org>> Subject: Re: [Qgis-user] shapefiles>> >> Hi Jim,>> >> That sounds a lot like a projection issue.>> >> Are your layers completely misaligned, like not overlapping at all? Or>> are they overlapping but with just a few (hundred) meters shift?>> >> An easy trick is adding the world layer and see which of your layers>> appears at the expected spot. You can do this by typing "world" in the>> coordinate bar beneath the map.>> >> Good luck!>> >> Raymond>> >> >> On 16-06-2020 05:24, forestermcgannon wrote:>>  > Why is my shapefile that I imported into project, not showing up >> with my>>  > orthoimage. The shapefile is a property line boundary.>>  > Thanks>>  > Jim>>  >>>  >>>  >>>  > ___>>  > Qgis-user mailing list>>  > Qgis-user@lists.osgeo.org>>  > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user>>  > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user>>  >>> ___>> Qgis-user mailing list>> Qgis-user@lists.osgeo.org>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user> ___> Qgis-user mailing list> Qgis-user@lists.osgeo.org> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user -- Randal Halerjh...@northrivergeographic.com(p) 423.653.3611http://www.northrivergeographic.com  
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Jim McGannon]

I thought so…thank you all!  Jim McGannonForestry/Landscape Consultant, LLCFrom: Raymond NijssenSent: Tuesday, June 16, 2020 12:08 AMTo: forestermcgannon; qgis-user@lists.osgeo.orgSubject: Re: [Qgis-user] shapefiles Ah, you'll need to change the layer order. Just drag and drop them at the right spot in the layer panel, left from your map. This is actually quite basic qgis knowledge, so you might consider following some (online) tutorials to get started quickly. Regards,Raymond   On 16-06-2020 07:55, forestermcgannon wrote:> when I "uncheck" the ortho layer, the property boundary (the shapefile) > appears. When I display the ortho imagery again, no boundary. It is like > the shapefile is "under" the ortho image, when I of course want it to > show "on" the ortho image. most seems like a vector display issue to me.> What do you think?> Thanks> Jim> > > > Jim McGannon> Forestry Landscape Consultant, LLC> Coloradotreearborist.com> 303-526-1118> > >  Original message > From: Raymond Nijssen > Date: 6/15/20 11:35 PM (GMT-07:00)> To: qgis-user@lists.osgeo.org> Subject: Re: [Qgis-user] shapefiles> > Hi Jim,> > That sounds a lot like a projection issue.> > Are your layers completely misaligned, like not overlapping at all? Or> are they overlapping but with just a few (hundred) meters shift?> > An easy trick is adding the world layer and see which of your layers> appears at the expected spot. You can do this by typing "world" in the> coordinate bar beneath the map.> > Good luck!> > Raymond> > > On 16-06-2020 05:24, forestermcgannon wrote:>  > Why is my shapefile that I imported into project, not showing up with my>  > orthoimage. The shapefile is a property line boundary.>  > Thanks>  > Jim>  >>  >>  >>  > ___>  > Qgis-user mailing list>  > Qgis-user@lists.osgeo.org>  > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user>  > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user>  >> ___> Qgis-user mailing list> Qgis-user@lists.osgeo.org> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Randal Hale]

Yeah - that's a layer order issue. Just drag that line above your ortho 
over in the layers panel. Select the layer and drag it up. You can move 
stuff around pretty easily in that panel.


If you ever dump a shapefile out of some custom Forestry software it 
could (like something to COGO boundaries or do cruises) it can become a 
projection issue easily. BUT - you're on the right track!


Randy

On 6/16/20 2:08 AM, Raymond Nijssen wrote:
Ah, you'll need to change the layer order. Just drag and drop them at 
the right spot in the layer panel, left from your map.


This is actually quite basic qgis knowledge, so you might consider 
following some (online) tutorials to get started quickly.


Regards,
Raymond



On 16-06-2020 07:55, forestermcgannon wrote:
when I "uncheck" the ortho layer, the property boundary (the 
shapefile) appears. When I display the ortho imagery again, no 
boundary. It is like the shapefile is "under" the ortho image, when I 
of course want it to show "on" the ortho image. most seems like a 
vector display issue to me.

What do you think?
Thanks
Jim



Jim McGannon
Forestry Landscape Consultant, LLC
Coloradotreearborist.com
303-526-1118


 Original message 
From: Raymond Nijssen 
Date: 6/15/20 11:35 PM (GMT-07:00)
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] shapefiles

Hi Jim,

That sounds a lot like a projection issue.

Are your layers completely misaligned, like not overlapping at all? Or
are they overlapping but with just a few (hundred) meters shift?

An easy trick is adding the world layer and see which of your layers
appears at the expected spot. You can do this by typing "world" in the
coordinate bar beneath the map.

Good luck!

Raymond


On 16-06-2020 05:24, forestermcgannon wrote:
 > Why is my shapefile that I imported into project, not showing up 
with my

 > orthoimage. The shapefile is a property line boundary.
 > Thanks
 > Jim
 >
 >
 >
 > ___
 > Qgis-user mailing list
 > Qgis-user@lists.osgeo.org
 > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
 > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
 >
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Randal Hale
rjh...@northrivergeographic.com
(p) 423.653.3611
http://www.northrivergeographic.com

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[shrawan tripathi]

Dear jim, please keep shapefile layer above orthoimage in layer panel

On Tue, 16 Jun, 2020, 1:20 PM forestermcgannon, 
wrote:

> when I "uncheck" the ortho layer, the property boundary (the shapefile)
> appears. When I display the ortho imagery again, no boundary. It is like
> the shapefile is "under" the ortho image, when I of course want it to show
> "on" the ortho image. most seems like a vector display issue to me.
> What do you think?
> Thanks
> Jim
>
>
>
> Jim McGannon
> Forestry Landscape Consultant, LLC
> Coloradotreearborist.com
> 303-526-1118
>
>
>  Original message 
> From: Raymond Nijssen 
> Date: 6/15/20 11:35 PM (GMT-07:00)
> To: qgis-user@lists.osgeo.org
> Subject: Re: [Qgis-user] shapefiles
>
> Hi Jim,
>
> That sounds a lot like a projection issue.
>
> Are your layers completely misaligned, like not overlapping at all? Or
> are they overlapping but with just a few (hundred) meters shift?
>
> An easy trick is adding the world layer and see which of your layers
> appears at the expected spot. You can do this by typing "world" in the
> coordinate bar beneath the map.
>
> Good luck!
>
> Raymond
>
>
> On 16-06-2020 05:24, forestermcgannon wrote:
> > Why is my shapefile that I imported into project, not showing up with my
> > orthoimage. The shapefile is a property line boundary.
> > Thanks
> > Jim
> >
> >
> >
> > ___
> > Qgis-user mailing list
> > Qgis-user@lists.osgeo.org
> > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> >
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Jan-Eric Oskarsson]

Hi, Jim!

Is't in the same projection/coordinatesystem as the project?

If you rightclick on the layer and choose zoom to layer, is't showing then?

/Jan-Eric

Den 2020-06-16 kl. 05:24, skrev forestermcgannon:
Why is my shapefile that I imported into project, not showing up with 
my orthoimage. The shapefile is a property line boundary.

Thanks
Jim



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Raymond Nijssen]

Ah, you'll need to change the layer order. Just drag and drop them at 
the right spot in the layer panel, left from your map.


This is actually quite basic qgis knowledge, so you might consider 
following some (online) tutorials to get started quickly.


Regards,
Raymond



On 16-06-2020 07:55, forestermcgannon wrote:
when I "uncheck" the ortho layer, the property boundary (the shapefile) 
appears. When I display the ortho imagery again, no boundary. It is like 
the shapefile is "under" the ortho image, when I of course want it to 
show "on" the ortho image. most seems like a vector display issue to me.

What do you think?
Thanks
Jim



Jim McGannon
Forestry Landscape Consultant, LLC
Coloradotreearborist.com
303-526-1118


 Original message 
From: Raymond Nijssen 
Date: 6/15/20 11:35 PM (GMT-07:00)
To: qgis-user@lists.osgeo.org
Subject: Re: [Qgis-user] shapefiles

Hi Jim,

That sounds a lot like a projection issue.

Are your layers completely misaligned, like not overlapping at all? Or
are they overlapping but with just a few (hundred) meters shift?

An easy trick is adding the world layer and see which of your layers
appears at the expected spot. You can do this by typing "world" in the
coordinate bar beneath the map.

Good luck!

Raymond


On 16-06-2020 05:24, forestermcgannon wrote:
 > Why is my shapefile that I imported into project, not showing up with my
 > orthoimage. The shapefile is a property line boundary.
 > Thanks
 > Jim
 >
 >
 >
 > ___
 > Qgis-user mailing list
 > Qgis-user@lists.osgeo.org
 > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
 > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
 >
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[forestermcgannon]

when I "uncheck" the ortho layer, the property boundary (the shapefile) 
appears. When I display the ortho imagery again, no boundary. It is like the 
shapefile is "under" the ortho image, when I of course want it to show "on" the 
ortho image. most seems like a vector display issue to me.What do you 
think?ThanksJimJim McGannonForestry Landscape Consultant, 
LLCColoradotreearborist.com 303-526-1118
 Original message From: Raymond Nijssen  
Date: 6/15/20  11:35 PM  (GMT-07:00) To: qgis-user@lists.osgeo.org Subject: Re: 
[Qgis-user] shapefiles Hi Jim,That sounds a lot like a projection issue.Are 
your layers completely misaligned, like not overlapping at all? Or are they 
overlapping but with just a few (hundred) meters shift?An easy trick is adding 
the world layer and see which of your layers appears at the expected spot. You 
can do this by typing "world" in the coordinate bar beneath the map.Good 
luck!RaymondOn 16-06-2020 05:24, forestermcgannon wrote:> Why is my shapefile 
that I imported into project, not showing up with my > orthoimage. The 
shapefile is a property line boundary.> Thanks> Jim> > > > 
___> Qgis-user mailing list> 
Qgis-user@lists.osgeo.org> List info: 
https://lists.osgeo.org/mailman/listinfo/qgis-user> Unsubscribe: 
https://lists.osgeo.org/mailman/listinfo/qgis-user> 
___Qgis-user mailing 
listQgis-user@lists.osgeo.orgList info: 
https://lists.osgeo.org/mailman/listinfo/qgis-userUnsubscribe: 
https://lists.osgeo.org/mailman/listinfo/qgis-user___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Raymond Nijssen]

Hi Jim,

That sounds a lot like a projection issue.

Are your layers completely misaligned, like not overlapping at all? Or 
are they overlapping but with just a few (hundred) meters shift?


An easy trick is adding the world layer and see which of your layers 
appears at the expected spot. You can do this by typing "world" in the 
coordinate bar beneath the map.


Good luck!

Raymond


On 16-06-2020 05:24, forestermcgannon wrote:
Why is my shapefile that I imported into project, not showing up with my 
orthoimage. The shapefile is a property line boundary.

Thanks
Jim



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] shapefiles

[forestermcgannon]

Why is my shapefile that I imported into project, not showing up with my 
orthoimage. The shapefile is a property line boundary.ThanksJim___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Shapefiles with all numeric attribute names don't classify right?

[Philip Pierdomenico]

Agreed, don't start field names with numbers.

(from ESRI, but I think should apply equally to shapefiles used in QGIS):
http://support.esri.com/cn/knowledgebase/techarticles/detail/23087


Phil


On Tue, May 10, 2016 at 1:55 PM, Anita Graser  wrote:

> ​Hi Ian,
> If I remember correctly, Shapefile attribute names must not start with a
> number. Im not sure why this is but I think that could be part of the issue.
> Best wishes,
> Anita​
>
> On Tue, May 10, 2016 at 3:26 PM, Ian Turton  wrote:
>
>> I have a shapefile with a bunch of attributes called 1980,1990,2000, etc
>> to represent the years the data is for. They are integers (if that matters)
>> but when I try to use them in a Qgis (2.14.2-Essen) the styler recognises
>> them as numeric but when I try to produce a graduated style all the classes
>> are  set to -2147483648 - -2147483648. If I rename the attribute to
>> 1980_inc or inc1980 the classifier is happy and everything works as I
>> expect.
>>
>> Does anyone know what might be going on?
>>
>> Ian
>>
>> --
>> Ian Turton
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>>
>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Shapefiles with all numeric attribute names don't classify right?

[Anita Graser]

​Hi Ian,
If I remember correctly, Shapefile attribute names must not start with a
number. Im not sure why this is but I think that could be part of the issue.
Best wishes,
Anita​

On Tue, May 10, 2016 at 3:26 PM, Ian Turton  wrote:

> I have a shapefile with a bunch of attributes called 1980,1990,2000, etc
> to represent the years the data is for. They are integers (if that matters)
> but when I try to use them in a Qgis (2.14.2-Essen) the styler recognises
> them as numeric but when I try to produce a graduated style all the classes
> are  set to -2147483648 - -2147483648. If I rename the attribute to
> 1980_inc or inc1980 the classifier is happy and everything works as I
> expect.
>
> Does anyone know what might be going on?
>
> Ian
>
> --
> Ian Turton
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Shapefiles with all numeric attribute names don't classify right?

[Ian Turton]

I have a shapefile with a bunch of attributes called 1980,1990,2000, etc to
represent the years the data is for. They are integers (if that matters)
but when I try to use them in a Qgis (2.14.2-Essen) the styler recognises
them as numeric but when I try to produce a graduated style all the classes
are  set to -2147483648 - -2147483648. If I rename the attribute to
1980_inc or inc1980 the classifier is happy and everything works as I
expect.

Does anyone know what might be going on?

Ian

-- 
Ian Turton
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: http://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Shapefiles in ArcPad

[AntonioLocandro]

Hi John,

Do you have a sample APL? If is text based maybe you can see with things
need to be changed to work with your particular shapefile and maybe create a
python script or plugin to be used in QGIS



--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/Shapefiles-in-ArcPad-tp5161058p5162765.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Shapefiles in ArcPad

[John Freestone]

Can anyone help me when saving shapefiles to use in ArcPad, can I create an APL 
file or similar so that the styles are copied in ArcPad?

I need to use multiple coloured points in one shape file - can do it in QGIS 
but no facility in ArcPad.

John.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] shapefiles to postgresql conversion

[chathura silva]

hi all,

when I try to connect postgresQL via Quantumgis (for import shapefiles into
postgresql  using spit)  , it asks for a service field to connect to the
server. What is the value of the field service ??

thank you
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles to postgresql conversion

[Giuseppe Sucameli]

Hi,

On Thu, Oct 11, 2012 at 7:59 PM, chathura silva chathur...@gmail.comwrote:

 when I try to connect postgresQL via Quantumgis (for import shapefiles
 into postgresql  using spit)  , it asks for a service field to connect to
 the server. What is the value of the field service ??


just leave it empty, it's a special connection param
but you don't need it to connect to a standard
postgresql installation.


 thank you

 ___
 Qgis-user mailing list
 Qgis-user@lists.osgeo.org
 http://lists.osgeo.org/mailman/listinfo/qgis-user




-- 
Giuseppe Sucameli - Faunalia
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Richard Duivenvoorde]

john wrote:
hello all, I'm new to qgis and am having a problem getting a tiff file 
to display with all vector files at the same time. I'm using 1.5.0 on 
windows vista. also can any one tell me how to get all the layers' 
co-ordinates to display in longitude and latitude? I've tried changing 
all to wgs 84 in each layer's properties-general-specify crs but can not 
get co-ord capture to display in long,lat.  any suggestions will be 
greatly appreciated.  


Hi John,
did you already succeed?

Are you sure your data and your project share the same crs?
I think QGIS is not able to reproject your raster (tiff) files, but it 
can reproject your vector files.


So setting your PROJECT crs to the crs of your tiff, and (if vectors are 
in other crs) enable 'on the fly projection' and set the right crs for 
the vectors should do the trick.


What kind of coordinates are show below your map near 'Coordinate:' are 
these in the crs you expect? It should be the crs of your tiffs.
You can then set the coordinate capture plugin to show you 
wgs84/epsg:4326 coords.


If not clear, please give some more info about your data files (or sent 
me a set offline)


Regards,

Richard






___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] shapefiles

[Benoit EXIGE]

Hi,

In QGIS the project CRS must be the same as all the rasters crs you  
want to display. Furthermore you need to enable on-the-fly projection  
to be able to display vector layers in different crs.


To display lat-lon I think the project crs must be one of the lat-lon  
crs. This will imply that all your rasters must be in the same lat-lon  
crs.

There is no, yet, on-the-fly projection for raster.

Also note that what you've done was only cosmetic and did not  
reproject the vector files to the intended projection. For that you  
need to explicitely reproject the vector files using the reproject  
option of the vector menu.


Hope this help.
Benoit

Sent from my iPod

On 07 Aug 2010, at 1:37, john jera...@hotmail.com wrote:

hello all, I'm new to qgis and am having a problem getting a tiff  
file to display with all vector files at the same time. I'm using  
1.5.0 on windows vista. also can any one tell me how to get all the  
layers' co-ordinates to display in longitude and latitude? I've  
tried changing all to wgs 84 in each layer's properties-general- 
specify crs but can not get co-ord capture to display in long,lat.   
any suggestions will be greatly appreciated.

thanks in advance,
j. rask
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] shapefiles

[john]

hello all, I'm new to qgis and am having a problem getting a tiff file to 
display with all vector files at the same time. I'm using 1.5.0 on windows 
vista. also can any one tell me how to get all the layers' co-ordinates to 
display in longitude and latitude? I've tried changing all to wgs 84 in each 
layer's properties-general-specify crs but can not get co-ord capture to 
display in long,lat.  any suggestions will be greatly appreciated.  
thanks in advance, 
j. rask___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user