Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view

[Alessio Degioannini]

It appears to be a problem with your Qgis installation.


You are right: it really is a problem with the installation of Qgis 
under Windows 8.1.
Now I am working with Qgis Brighton under Ubuntu and everything works 
perfectly!
I want to specify that, when I installed Windows Qgis Brighton, before I 
removed the previous version (Chugiak) and I deleted all folders and 
registry keys related to Qgis and, only later, I installed Brighton.
As soon as possible I'll just make the reinstallation in the same way 
and will inform you of the result.

Thanks again and best wishes.


Alessio

Il 21/12/2014 16:45, nicolas.cadi...@archeotec.ca ha scritto:

Hi,
It appears to be a problem with your Qgis installation.  I was able to 
open both file and modify them both ways.  I assumed the CRS was wgs84 
(it is not).  I would do a complete reinstall and make sure you remove 
the registry keys in the windows registry. You can also backup then 
erase the .qgis2 folder (your plugins).


I have sent you back both files plus a project plus file I did the 
"Save as" (they are in the wrong projection).  You can see that you 
are missing some files for yours layers but it does not appear to be a 
problem for now.  Did you try to modify the files on a server or from 
your hard drive?


Nicolas



Le 2014-12-21 07:16, Alessio Degioannini a écrit :

send me the files if you can

attached shapefiles:

  * target layer: where to past the new polygon
  * layer containing the polygon to be added to target layer.

Try to do, and wonder...
Thank you and best regards.
Alessio

Il 20/12/2014 17:32, Nicolas Cadieux ha scritto:


Yes that could be it...  Sometime simple is better... But if he did 
a cut in paste in an empty file, then the file should not have 
styling properties


Alessio, check out to make sure its not a styling issue an send me 
the files if you can.


Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995

Le 2014-12-20 08:21, "Joris Hintjens [via OSGeo.org]" <[hidden 
email] > a écrit :


Hi Nicolas,
 I have had same issues. In my case the problem was that the
target layer had styling properties. The new added elements had
no style and appeared blank. My advise; check the styling in the
layer properties.


Greets

Joris


Op 20-dec.-2014, om 11:22 heeft Alessio Degioannini <[hidden
email] > het
volgende geschreven:

Hi Nicolas,

Try copying the content of the second file to an empty file to
see what happens.  If that works, try copying the content of
the first file in that new file and see what happens.

Nothing Same issue: new record ok, no new entity in view.


Could it be a projection problem?  Look to see if both files
are in the same projection.  I usually use cut and paste
between two file with the same CRS. 

Every layer is in the same projection.
Every layer is polygonal.

Weird a lot!
Thank you,
Alessio

Il 19/12/2014 15:06, Nicolas Cadieux ha scritto:

Hi,
Sounds weird.  Try copying the content of the second file to an
empty file to see what happens.  If that works, try copying the
content of the first file in that new file and see what happens.

Could it be a projection problem?  Look to see if both files
are in the same projection.  I usually use cut and paste
between two file with the same CRS.

Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995

Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org
] " <[hidden
email]> a écrit :
Hi,
I've just copied an entity from a poligonal layer to another.
No geometry or topology error in the source layer, no geo/top
errror in
the target layer before pasting the new entity.
After pasting: in the target layer table appears the espected new
record, in the view: nothing. No reply to zoom to selected command.
Check geometry freezes. Check topology ok.
Help me, please.
Thanks in advance.
Alessio
___
Qgis-user mailing list
[hidden
email]
http://lists.osgeo.org/mailman/listinfo/qgis-user



If you reply to this email, your message will be added to the
discussion below:

http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
To start a new topic under Quantum GIS - User, email[hidden
email]
To unsubscribe from Quantum GIS - User,click here.
NAML

Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view

[Nicolas Cadieux]

Hi, 
I have seen this kind of funny stuff in AutoCAD 2014 export.  For each 
layer, the export only created 3 files and not 4 to 6.  I think I could 
edit the database but not the objects... This could be your problem.  I 
noticed that the editing tools where grey but the file was in editing mode. 
The first thing I would do is load them in a project and do a "save as" and 
change the name.  That should create the missing files and these should 
work for the cut and paste. 
Nicolas Cadieux M.Sc. 
Les Entreprises Archéotec inc.  
8548, rue Saint-Denis Montréal H2P 2H2 
Téléphone: 514.381.5112  Fax: 514.381.4995 
Le 2014-12-21 06:30, "Alessio Degioannini [via OSGeo.org]  " 
 a écrit : 


  

  
  
Thank you, Carlos 
  but the
  new polygon has no common borders with other
  polygons and option "avoid intersection" is not on. 
  Alessio 

  *
Alessio Degioannini - dottore forestale
PROTER - Studio Associato Agronomico e Forestale
C.so Stati Uniti, 27 - 10128 TORINO (ITALY)
Tel: +39 011 817 0767
Fax: +39 011 070 2382
Cell.: +39 329 211 2781
E-mail: [hidden email] 
P.E.C.: [hidden email] 
* 
  Il 20/12/2014 19:39, Carlos López PSIG ha scritto: 


  
Hi, 

  Be careful with the "Snapping Options..." (Menu
  Settings) , perhaps you have "Avoid intersection" in one
  layer. 
  

  Best regards, 

  
  

  

  

  

  Carlos López Quintanilla 
  
  
www.psig.es 
  [hidden email] 
+34 699.680.261 
  



  

  


2014-12-20 19:14 GMT+01:00 Alessio
  Degioannini < [hidden email] >: 
  


  
  check out to make sure its not
a styling issue an 
 No, it is not a styling issue. 
  
  send me the files if you can. 
 Ok. Tomorrow in the morning. 

Thank you, Nicolas. 

Alessio 

Il 20/12/2014 17:32, Nicolas Cadieux ha scritto: 
  
  

  
Yes that could be it...  Sometime
  simple is better... But if he did a cut in paste
  in an empty file, then the file should not have
  styling properties 
Alessio, check out to make sure its not
  a styling issue an send me the files if you can. 
Nicolas Cadieux M.Sc. 
  Les Entreprises Archéotec inc.  
  8548, rue Saint-Denis Montréal H2P 2H2 
  Téléphone: 514.381.5112  Fax: 514.381.4995 
Le 2014-12-20 08:21, "Joris Hintjens [via
  OSGeo.org]" < [hidden
email] > a écrit : 
  
 Hi Nicolas,
 I have had same issues. In my case the
  problem was that the target layer had styling
  properties. The new added elements had no
  style and appeared blank. My advise; check the
  styling in the layer properties. 




Greets 


Joris 
  
  

  Op 20-dec.-2014, om 11:22 heeft
Alessio Degioannini < [hidden email] >
het volgende geschreven: 
  
  
Hi

  Nicolas, 
  
Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-21

Thread
Alessio Degioannini


Thank you, Carlos
but the new polygon has no common borders with other polygons and option 
"avoid intersection" is not on.

Alessio

*
Alessio Degioannini - dottore forestale
PROTER - Studio Associato Agronomico e Forestale
C.so Stati Uniti, 27 - 10128 TORINO (ITALY)
Tel: +39 011 817 0767
Fax: +39 011 070 2382
Cell.: +39 329 211 2781
E-mail: a.degioann...@proterstudio.com
P.E.C.: a.degioann...@epap.conafpec.it
*

Il 20/12/2014 19:39, Carlos López PSIG ha scritto:

Hi,
Be careful with the "Snapping Options..." (Menu Settings) , perhaps 
you have "Avoid intersection" in one layer.


Best regards,

*
*
*
*
*Carlos López Quintanilla*

www.psig.es 
carlos.lo...@psig.es 
+34 699.680.261



2014-12-20 19:14 GMT+01:00 Alessio Degioannini 
mailto:a.degioann...@proterstudio.com>>:


check out to make sure its not a styling issue an 

No, it is not a styling issue.


send me the files if you can.

Ok. Tomorrow in the morning.

Thank you, Nicolas.

Alessio

Il 20/12/2014 17:32, Nicolas Cadieux ha scritto:


Yes that could be it...  Sometime simple is better... But if he
did a cut in paste in an empty file, then the file should not
have styling properties

Alessio, check out to make sure its not a styling issue an send
me the files if you can.

Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995

Le 2014-12-20 08:21, "Joris Hintjens [via OSGeo.org]" <[hidden
email] > a
écrit :

Hi Nicolas,
 I have had same issues. In my case the problem was that the
target layer had styling properties. The new added elements
had no style and appeared blank. My advise; check the styling
in the layer properties.


Greets

Joris


Op 20-dec.-2014, om 11:22 heeft Alessio Degioannini <[hidden
email]
> het
volgende geschreven:

Hi Nicolas,

Try copying the content of the second file to an empty file
to see what happens.  If that works, try copying the
content of the first file in that new file and see what
happens.

Nothing Same issue: new record ok, no new entity in view.


Could it be a projection problem?  Look to see if both
files are in the same projection.  I usually use cut and
paste between two file with the same CRS. 

Every layer is in the same projection.
Every layer is polygonal.

Weird a lot!
Thank you,
Alessio

Il 19/12/2014 15:06, Nicolas Cadieux ha scritto:

Hi,
Sounds weird.  Try copying the content of the second file to
an empty file to see what happens.  If that works, try
copying the content of the first file in that new file and
see what happens.

Could it be a projection problem?  Look to see if both files
are in the same projection.  I usually use cut and paste
between two file with the same CRS.

Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995

Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org
] " <[hidden email]> a écrit :
Hi,
I've just copied an entity from a poligonal layer to another.
No geometry or topology error in the source layer, no
geo/top errror in
the target layer before pasting the new entity.
After pasting: in the target layer table appears the
espected new
record, in the view: nothing. No reply to zoom to selected
command.
Check geometry freezes. Check topology ok.
Help me, please.
Thanks in advance.
Alessio
___
Qgis-user mailing list
[hidden email]
http://lists.osgeo.org/mailman/listinfo/qgis-user



If you reply to this email, your message will be added to
the discussion below:

http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
To start a new topic under Quantum GIS - User, email[hidden email]
To unsubscribe from Quantum GIS - User,click here.
NAML





Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-20

Thread
Carlos López PSIG

Hi,
Be careful with the "Snapping Options..." (Menu Settings) , perhaps you
have "Avoid intersection" in one layer.

Best regards,


* *

*Carlos López Quintanilla*

www.psig.es
carlos.lo...@psig.es
+34 699.680.261



2014-12-20 19:14 GMT+01:00 Alessio Degioannini <
a.degioann...@proterstudio.com>:

>  check out to make sure its not a styling issue an
>
> No, it is not a styling issue.
>
> send me the files if you can.
>
> Ok. Tomorrow in the morning.
>
> Thank you, Nicolas.
>
> Alessio
>
> Il 20/12/2014 17:32, Nicolas Cadieux ha scritto:
>
> Yes that could be it...  Sometime simple is better... But if he did a cut
> in paste in an empty file, then the file should not have styling
> properties
>
> Alessio, check out to make sure its not a styling issue an send me the
> files if you can.
>
> Nicolas Cadieux M.Sc.
> Les Entreprises Archéotec inc.
> 8548, rue Saint-Denis Montréal H2P 2H2
> Téléphone: 514.381.5112  Fax: 514.381.4995
> Le 2014-12-20 08:21, "Joris Hintjens [via OSGeo.org]" <[hidden email]
> > a écrit :
>
> Hi Nicolas,
>  I have had same issues. In my case the problem was that the target layer
> had styling properties. The new added elements had no style and appeared
> blank. My advise; check the styling in the layer properties.
>
>
>  Greets
>
>  Joris
>
>
> Op 20-dec.-2014, om 11:22 heeft Alessio Degioannini <[hidden email]
> > het volgende
> geschreven:
>
>  Hi Nicolas,
>
> Try copying the content of the second file to an empty file to see what
> happens.  If that works, try copying the content of the first file in that
> new file and see what happens.
>
> Nothing Same issue: new record ok, no new entity in view.
>
> Could it be a projection problem?  Look to see if both files are in the
> same projection.  I usually use cut and paste between two file with the
> same CRS.
>
> Every layer is in the same projection.
> Every layer is polygonal.
>
> Weird a lot!
> Thank you,
> Alessio
>
> Il 19/12/2014 15:06, Nicolas Cadieux ha scritto:
>
> Hi,
> Sounds weird.  Try copying the content of the second file to an empty file
> to see what happens.  If that works, try copying the content of the first
> file in that new file and see what happens.
>
> Could it be a projection problem?  Look to see if both files are in the
> same projection.  I usually use cut and paste between two file with the
> same CRS.
>
> Nicolas Cadieux M.Sc.
> Les Entreprises Archéotec inc.
> 8548, rue Saint-Denis Montréal H2P 2H2
> Téléphone: 514.381.5112  Fax: 514.381.4995
> Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org] " < moz-do-not-send="true"
> href="x-msg://3/user/SendEmail.jtp?type=node&node=5178555&i=0"
> target="_top" rel="nofollow" link="external" class="">[hidden email]> a
> écrit :
> Hi,
> I've just copied an entity from a poligonal layer to another.
> No geometry or topology error in the source layer, no geo/top errror in
> the target layer before pasting the new entity.
> After pasting: in the target layer table appears the espected new
> record, in the view: nothing. No reply to zoom to selected command.
> Check geometry freezes. Check topology ok.
> Help me, please.
> Thanks in advance.
> Alessio
> ___
> Qgis-user mailing list
>  href="x-msg://3/user/SendEmail.jtp?type=node&node=5178522&i=0"
> target="_top" rel="nofollow" link="external" class="">[hidden email]
> http://lists.osgeo.org/mailman/listinfo/qgis-user
>
>
> --
>  If you reply to this email, your message will be added to the discussion
> below:
>
> http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
> To start a new topic under Quantum GIS - User, email  moz-do-not-send="true"
> href="x-msg://3/user/SendEmail.jtp?type=node&node=5178555&i=1"
> target="_top" rel="nofollow" link="external" class="">[hidden email]
> To unsubscribe from Quantum GIS - User, click here.
> NAML
> 
>
>
> --
> View this message in context: Re: poligonal entity copied from a layer to
> another appears in the table, not in the view
> 
> Sent from the Quantum GIS - User mailing list archive
>  at
> Nabble.com.
>
>
> ___
> Qgis-user mailing



Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-20

Thread
Alessio Degioannini

check out to make sure its not a styling issue an 

No, it is not a styling issue.


send me the files if you can.

Ok. Tomorrow in the morning.

Thank you, Nicolas.

Alessio

Il 20/12/2014 17:32, Nicolas Cadieux ha scritto:


Yes that could be it...  Sometime simple is better... But if he did a 
cut in paste in an empty file, then the file should not have styling 
properties


Alessio, check out to make sure its not a styling issue an send me the 
files if you can.


Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995

Le 2014-12-20 08:21, "Joris Hintjens [via OSGeo.org]" <[hidden email] 
> a écrit :


Hi Nicolas,
 I have had same issues. In my case the problem was that the
target layer had styling properties. The new added elements had no
style and appeared blank. My advise; check the styling in the
layer properties.


Greets

Joris


Op 20-dec.-2014, om 11:22 heeft Alessio Degioannini <[hidden
email] > het
volgende geschreven:

Hi Nicolas,

Try copying the content of the second file to an empty file to
see what happens.  If that works, try copying the content of the
first file in that new file and see what happens.

Nothing Same issue: new record ok, no new entity in view.


Could it be a projection problem?  Look to see if both files are
in the same projection.  I usually use cut and paste between two
file with the same CRS. 

Every layer is in the same projection.
Every layer is polygonal.

Weird a lot!
Thank you,
Alessio

Il 19/12/2014 15:06, Nicolas Cadieux ha scritto:

Hi,
Sounds weird.  Try copying the content of the second file to an
empty file to see what happens.  If that works, try copying the
content of the first file in that new file and see what happens.

Could it be a projection problem?  Look to see if both files are
in the same projection.  I usually use cut and paste between two
file with the same CRS.

Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995

Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org
] " <[hidden
email]> a écrit :
Hi,
I've just copied an entity from a poligonal layer to another.
No geometry or topology error in the source layer, no geo/top
errror in
the target layer before pasting the new entity.
After pasting: in the target layer table appears the espected new
record, in the view: nothing. No reply to zoom to selected command.
Check geometry freezes. Check topology ok.
Help me, please.
Thanks in advance.
Alessio
___
Qgis-user mailing list
[hidden email]
http://lists.osgeo.org/mailman/listinfo/qgis-user



If you reply to this email, your message will be added to the
discussion below:

http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
To start a new topic under Quantum GIS - User, email[hidden email]
To unsubscribe from Quantum GIS - User,click here.
NAML





View this message in context:Re: poligonal entity copied from a
layer to another appears in the table, not in the view


Sent from theQuantum GIS - User mailing list archive
at
Nabble.com .


___
Qgis-user mailing list
[hidden email]  
http://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user


If you reply to this email, your message will be added to the 
discussion below:
http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view



Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-20

Thread
Nicolas Cadieux

Yes that could be it...  Sometime simple is better... But if he did a cut 
in paste in an empty file, then the file should not have styling properties 
Alessio, check out to make sure its not a styling issue an send me the files if 
you can. 
Nicolas Cadieux M.Sc. 
Les Entreprises Archéotec inc.  
8548, rue Saint-Denis Montréal H2P 2H2 
Téléphone: 514.381.5112  Fax: 514.381.4995 
Le 2014-12-20 08:21, "Joris Hintjens [via OSGeo.org]" 
 a écrit : 

Hi Nicolas,  I have had same issues. In my case the problem was 
that the target layer had styling properties. The new added elements had no 
style and appeared blank. My advise; check the styling in the layer properties. 
Greets Joris   Op 20-dec.-2014, om 11:22 heeft Alessio Degioannini < 
[hidden email] > het volgende geschreven: Hi Nicolas, Try copying the 
content of the second file to an empty file to see what happens.  If that 
works, try copying the content of the first file in that new file and see what 
happens. Nothing Same issue: new record ok, no new entity in view. Could it 
be a projection problem?  Look to see if both files are in the same 
projection.  I usually use cut and paste between two file with the same 
CRS.   Every layer is in the same projection. Every layer is 
polygonal. Weird a lot! Thank you, Alessio Il 19/12/2014 15:06, Nicolas Cadieux 
ha scritto: 
 Hi, Sounds weird.  Try copying the 
content of the second file to an empty file to see what happens.  If that 
works, try copying the content of the first file in that new file and see what 
happens. Could it be a projection problem?  Look to see if both files are 
in the same projection.  I usually use cut and paste between two file with 
the same CRS.   Nicolas Cadieux M.Sc. Les Entreprises Archéotec 
inc.  8548, rue Saint-Denis Montréal H2P 2H2 Téléphone: 514.381.5112 
 Fax: 514.381.4995 Le 2014-12-19 04:49, "Alessio Degioannini [via 
OSGeo.org ] " <[hidden email] > a écrit : 
Hi,  
I've just copied an entity from a poligonal layer to another.  No geometry 
or topology error in the source layer, no geo/top errror in  the target 
layer before pasting the new entity.  After pasting: in the target layer 
table appears the espected new  record, in the view: nothing. No reply to 
zoom to selected command.  Check geometry freezes. Check topology 
ok.  Help me, please.  Thanks in advance.  Alessio  
___  Qgis-user mailing 
list  [hidden email]   
http://lists.osgeo.org/mailman/listinfo/qgis-user If you reply to this email, 
your message will be added to the discussion below: 
http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
 To start a new topic under Quantum GIS - User, email [hidden email]   To unsubscribe from Quantum GIS - 
User,  click here . NAML View this message in context:  Re: poligonal 
entity copied from a layer to another appears in the table, not in the view 
Sent from the  Quantum GIS - User mailing list archive  at Nabble.com 
. ___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user 
___ Qgis-user mailing list [hidden 
email] http://lists.osgeo.org/mailman/listinfo/qgis-user 
___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user 








If you reply to this email, your message will be added to the 
discussion below: 

http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp517852



Re: [Qgis-user] poligonal entity copied from a layer to another	appears in the table, not in the view


2014-12-20

Thread
Joris Hintjens

Hi Nicolas,
 I have had same issues. In my case the problem was that the target layer had 
styling properties. The new added elements had no style and appeared blank. My 
advise; check the styling in the layer properties.


Greets

Joris
 
> Op 20-dec.-2014, om 11:22 heeft Alessio Degioannini 
>  het volgende geschreven:
> 
> Hi Nicolas,
>> Try copying the content of the second file to an empty file to see what 
>> happens.  If that works, try copying the content of the first file in that 
>> new file and see what happens.
> Nothing Same issue: new record ok, no new entity in view.
> 
>> Could it be a projection problem?  Look to see if both files are in the same 
>> projection.  I usually use cut and paste between two file with the same CRS. 
>>  
> Every layer is in the same projection.
> Every layer is polygonal.
> 
> Weird a lot!
> Thank you,
> Alessio
> 
> Il 19/12/2014 15:06, Nicolas Cadieux ha scritto:
>> Hi,
>> Sounds weird.  Try copying the content of the second file to an empty file 
>> to see what happens.  If that works, try copying the content of the first 
>> file in that new file and see what happens.
>> 
>> Could it be a projection problem?  Look to see if both files are in the same 
>> projection.  I usually use cut and paste between two file with the same CRS. 
>>  
>> 
>> Nicolas Cadieux M.Sc.
>> Les Entreprises Archéotec inc. 
>> 8548, rue Saint-Denis Montréal H2P 2H2
>> Téléphone: 514.381.5112  Fax: 514.381.4995
>> 
>> Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org] " <[hidden email] 
>> > a écrit :
>> Hi, 
>> I've just copied an entity from a poligonal layer to another. 
>> No geometry or topology error in the source layer, no geo/top errror in 
>> the target layer before pasting the new entity. 
>> After pasting: in the target layer table appears the espected new 
>> record, in the view: nothing. No reply to zoom to selected command. 
>> Check geometry freezes. Check topology ok. 
>> Help me, please. 
>> Thanks in advance. 
>> Alessio 
>> ___ 
>> Qgis-user mailing list 
>> [hidden email]  
>> http://lists.osgeo.org/mailman/listinfo/qgis-user 
>> 
>> 
>> 
>> If you reply to this email, your message will be added to the discussion 
>> below:
>> http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
>>  
>> 
>> To start a new topic under Quantum GIS - User, email [hidden email] 
>>  
>> To unsubscribe from Quantum GIS - User, click here 
>> .
>> NAML 
>> 
>> View this message in context: Re: poligonal entity copied from a layer to 
>> another appears in the table, not in the view 
>> 
>> Sent from the Quantum GIS - User mailing list archive 
>>  at 
>> Nabble.com.
>> 
>> 
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org 
>> http://lists.osgeo.org/mailman/listinfo/qgis-user 
>> 
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org 
> http://lists.osgeo.org/mailman/listinfo/qgis-user 
> 
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user




Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-20

Thread
Alessio Degioannini


Hi Nicolas,
Try copying the content of the second file to an empty file to see 
what happens.  If that works, try copying the content of the first 
file in that new file and see what happens.

Nothing Same issue: new record ok, no new entity in view.

Could it be a projection problem?  Look to see if both files are in 
the same projection.  I usually use cut and paste between two file 
with the same CRS. 

Every layer is in the same projection.
Every layer is polygonal.

Weird a lot!
Thank you,
Alessio

Il 19/12/2014 15:06, Nicolas Cadieux ha scritto:


Hi,
Sounds weird.  Try copying the content of the second file to an empty 
file to see what happens.  If that works, try copying the content of 
the first file in that new file and see what happens.


Could it be a projection problem?  Look to see if both files are in 
the same projection.  I usually use cut and paste between two file 
with the same CRS.


Nicolas Cadieux M.Sc.
Les Entreprises Archéotec inc.
8548, rue Saint-Denis Montréal H2P 2H2
Téléphone: 514.381.5112  Fax: 514.381.4995

Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org] " <[hidden 
email] > a écrit :


Hi,
I've just copied an entity from a poligonal layer to another.
No geometry or topology error in the source layer, no geo/top
errror in
the target layer before pasting the new entity.
After pasting: in the target layer table appears the espected new
record, in the view: nothing. No reply to zoom to selected command.
Check geometry freezes. Check topology ok.
Help me, please.
Thanks in advance.
Alessio
___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user



If you reply to this email, your message will be added to the
discussion below:

http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html

To start a new topic under Quantum GIS - User, email [hidden
email] 
To unsubscribe from Quantum GIS - User, click here.
NAML






View this message in context: Re: poligonal entity copied from a layer 
to another appears in the table, not in the view 

Sent from the Quantum GIS - User mailing list archive 
 
at Nabble.com.



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user




Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-19

Thread
Nicolas Cadieux

Hi again, 
You could also check to make sure if both file are polygons.  Maybe one is 
lines and the other polygons? 
Nicolas Cadieux M.Sc. 
Les Entreprises Archéotec inc.  
8548, rue Saint-Denis Montréal H2P 2H2 
Téléphone: 514.381.5112  Fax: 514.381.4995 
Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org]  " 
 a écrit : 

Hi,
I've just copied an entity from a poligonal layer to another.
No geometry or topology error in the source layer, no geo/top errror in 
the target layer before pasting the new entity.
After pasting: in the target layer table appears the espected new 
record, in the view: nothing. No reply to zoom to selected command. 
Check geometry freezes. Check topology ok.
Help me, please.
Thanks in advance.
Alessio
___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user 








If you reply to this email, your message will be added to the 
discussion below: 

http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
 


To start a new topic under Quantum GIS - User, email 
ml-node+s1560n4125267...@n6.nabble.com 
To unsubscribe from Quantum GIS - User, click here . 
NAML 




--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522p5178556.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user




Re: [Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-19

Thread
Nicolas Cadieux

Hi, 
Sounds weird.  Try copying the content of the second file to an empty file 
to see what happens.  If that works, try copying the content of the first 
file in that new file and see what happens. 
Could it be a projection problem?  Look to see if both files are in the 
same projection.  I usually use cut and paste between two file with the 
same CRS.  
Nicolas Cadieux M.Sc. 
Les Entreprises Archéotec inc.  
8548, rue Saint-Denis Montréal H2P 2H2 
Téléphone: 514.381.5112  Fax: 514.381.4995 
Le 2014-12-19 04:49, "Alessio Degioannini [via OSGeo.org]  " 
 a écrit : 

Hi,
I've just copied an entity from a poligonal layer to another.
No geometry or topology error in the source layer, no geo/top errror in 
the target layer before pasting the new entity.
After pasting: in the target layer table appears the espected new 
record, in the view: nothing. No reply to zoom to selected command. 
Check geometry freezes. Check topology ok.
Help me, please.
Thanks in advance.
Alessio
___
Qgis-user mailing list
[hidden email] 
http://lists.osgeo.org/mailman/listinfo/qgis-user 








If you reply to this email, your message will be added to the 
discussion below: 

http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522.html
 


To start a new topic under Quantum GIS - User, email 
ml-node+s1560n4125267...@n6.nabble.com 
To unsubscribe from Quantum GIS - User, click here . 
NAML 




--
View this message in context: 
http://osgeo-org.1560.x6.nabble.com/poligonal-entity-copied-from-a-layer-to-another-appears-in-the-table-not-in-the-view-tp5178522p5178555.html
Sent from the Quantum GIS - User mailing list archive at Nabble.com.___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user




[Qgis-user] poligonal entity copied from a layer to another appears in the table, not in the view


2014-12-19

Thread
Alessio Degioannini


Hi,
I've just copied an entity from a poligonal layer to another.
No geometry or topology error in the source layer, no geo/top errror in 
the target layer before pasting the new entity.
After pasting: in the target layer table appears the espected new 
record, in the view: nothing. No reply to zoom to selected command. 
Check geometry freezes. Check topology ok.

Help me, please.
Thanks in advance.
Alessio
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user