Re: [qmailtoaster] New Packages Available - spamassassin, simscan, autorespond, control-panel
Dnia 2012-07-26, czw o godzinie 18:33 -0700, Eric Shubert pisze: [...] sa-update now also runs on an hourly basis (give or take a few minutes to give the servers a break), [...] There is only one place where script /usr/share/spamassassin/sa-update.cron is started - /etc/cron.d/sa-update In this file line executing script is commented out. This line executes update script ones a day at 4:10 am, not every hour. IMHO old script /etc/cron.daily/qtp-sa-update should be removed, if exists. -- Pozdrawiam/Regards, mgr inż. Aleksander Podsiadły st. informatyk gminy Urząd Gminy w Mniowie ul. Centralna 9 26-080 Mniów tel: +48 413737002 fax: +48 413737024 mail: a...@mniow.pl jid: a...@jabber.mniow.pl gg: 9150578 - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] New Packages Available - spamassassin, simscan, autorespond, control-panel
Hi folks, Just tried again and still get this error... Hi folks, I am still getting this error every time I try to qtp-newmodel. Getting source packages ...(this may take a while) Downloading autorespond-toaster-2.0.5-1.4.0.src.rpm --2012-07-29 10:28:45-- http://mirrors.qmailtoaster.com/autorespond-toaster-2.0.5-1.4.0.src.rpm Resolving mirrors.qmailtoaster.com... 109.74.205.92, 96.228.219.83, 96.228.219.84, ... Connecting to mirrors.qmailtoaster.com|109.74.205.92|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-07-29 10:28:45 ERROR 404: Not Found. best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 29/07/2012 02:14, Aleksander Podsiadły wrote: Dnia 2012-07-26, czw o godzinie 18:33 -0700, Eric Shubert pisze: [...] sa-update now also runs on an hourly basis (give or take a few minutes to give the servers a break), [...] There is only one place where script /usr/share/spamassassin/sa-update.cron is started - /etc/cron.d/sa-update In this file line executing script is commented out. This line executes update script ones a day at 4:10 am, not every hour. IMHO old script /etc/cron.daily/qtp-sa-update should be removed, if exists. - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] New Packages Available - spamassassin, simscan, autorespond, control-panel
Hi , An update on this issue... I ended up downloading the two files autoresponder and spamassassin using a web browser on my windows machine then ftp'ed them to the qmail box. Running qtp-newmodel allowed the build to complete. qtp-ami-up2date showed another version of spamassassin was available which did not download properly either. I retrieved this using a browser as well. This last package will not install, see text below for output of qtp-newmodel. Obsoletes: perl-Mail-SpamAssassin spamassassin perl-spamassassin Checking for unpackaged file(s): /usr/lib/rpm/check-files /var/tmp/spamassassin-toaster-root Wrote: /usr/src/redhat/RPMS/x86_64/spamassassin-toaster-3.3.2-1.4.2.x86_64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.49280 + umask 022 + cd /usr/src/redhat/BUILD + cd Mail-SpamAssassin-3.3.2 + '[' -n /var/tmp/spamassassin-toaster-root -a /var/tmp/spamassassin-toaster-root '!=' / ']' + rm -rf /var/tmp/spamassassin-toaster-root + '[' -d /usr/src/redhat/BUILD/Mail-SpamAssassin-3.3.2 ']' + rm -rf /usr/src/redhat/BUILD/Mail-SpamAssassin-3.3.2 + '[' -f /var/tmp/spamassassin-3.3.2-gcc ']' + rm -f /var/tmp/spamassassin-3.3.2-gcc + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.49280 + umask 022 + cd /usr/src/redhat/BUILD + rm -rf Mail-SpamAssassin-3.3.2 + exit 0 Installing spamassassin-toaster-3.3.2-1.4.2 in the sandbox ... Preparing... ## error: %pre(spamassassin-toaster-3.3.2-1.4.2.x86_64) scriptlet failed, exit status 1 error: install: %pre scriptlet failed (2), skipping spamassassin-toaster-3.3.2-1.4.2 end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details thanks, I hope someone can see what is wrong here? best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 29/07/2012 10:30, Tony White wrote: Hi folks, Just tried again and still get this error... Hi folks, I am still getting this error every time I try to qtp-newmodel. Getting source packages ...(this may take a while) Downloading autorespond-toaster-2.0.5-1.4.0.src.rpm --2012-07-29 10:28:45-- http://mirrors.qmailtoaster.com/autorespond-toaster-2.0.5-1.4.0.src.rpm Resolving mirrors.qmailtoaster.com... 109.74.205.92, 96.228.219.83, 96.228.219.84, ... Connecting to mirrors.qmailtoaster.com|109.74.205.92|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-07-29 10:28:45 ERROR 404: Not Found. best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 29/07/2012 02:14, Aleksander Podsiadły wrote: Dnia 2012-07-26, czw o godzinie 18:33 -0700, Eric Shubert pisze: [...] sa-update now also runs on an hourly basis (give or take a few minutes to give the servers a break), [...] There is only one place where script /usr/share/spamassassin/sa-update.cron is started - /etc/cron.d/sa-update In this file line executing script is
Re: [qmailtoaster] New Packages Available - spamassassin, simscan, autorespond, control-panel
On 07/26/2012 06:33 PM, Eric Shubert wrote: Thanks to Bharath for updating autorespond and control-panel. Autorespond is an upstream version upgrade, and control-panel has had short tags and some extra html removed in preparation for COS6. Simscan has a new update-simscan script, which allows clamav and spamassassin to update their versions in simscan when they're upgraded. This happens in the rpm now, so it works if you don't use qtp-newmodel (which has taken care of this in the past, and still does). Spamassassin is the biggest change by far. We're going from 3.2.5 to 3.3.2, which is pretty big. You should probably have a look at http://svn.apache.org/repos/asf/spamassassin/branches/3.3/build/announcements/3.3.0.txt to see what's in store. Like clamav, SA now does not include rules in the basic package, and relies on sa-update to populate them. In addition, a whole new rule base is used in each minor release (3.2 to 3.3), so sa-update will run as part of the %post install process. This runs pretty quickly so long as things (network and servers) are working properly. sa-update now also runs on an hourly basis (give or take a few minutes to give the servers a break), so SA's rules will now automatically be kept up to date. This only used to happen if you had set up sa-update yourself (or you had run qtp-sa-update). If you used qtp-sa-update in the past to install rules from openprotect.com channel (formerly rules-du-jour), you *DO NOT* want to run that script again. It will be modified soon, but the change to use these rules is simple. Just edit the /usr/share/spamassassin/sa-update.cron file uncomment the openprotect line, and move it down one line, before the spamassassin.org line. That's all there is to it. The rules will be downloaded and activated with the next sa-update cycle. FWIW, this brings us nearly current. The only packages left are vpopmail, qmailadmin and vqadmin. I hope to get those tested soon. That's all for now. Please post here if you have a problem. Fabulous, everyone! Thanks for your hard work. Brent Gardner - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] New Packages Available - spamassassin, simscan, autorespond, control-panel
Thanks to Bharath for updating autorespond and control-panel. Autorespond is an upstream version upgrade, and control-panel has had short tags and some extra html removed in preparation for COS6. Simscan has a new update-simscan script, which allows clamav and spamassassin to update their versions in simscan when they're upgraded. This happens in the rpm now, so it works if you don't use qtp-newmodel (which has taken care of this in the past, and still does). Spamassassin is the biggest change by far. We're going from 3.2.5 to 3.3.2, which is pretty big. You should probably have a look at http://svn.apache.org/repos/asf/spamassassin/branches/3.3/build/announcements/3.3.0.txt to see what's in store. Like clamav, SA now does not include rules in the basic package, and relies on sa-update to populate them. In addition, a whole new rule base is used in each minor release (3.2 to 3.3), so sa-update will run as part of the %post install process. This runs pretty quickly so long as things (network and servers) are working properly. sa-update now also runs on an hourly basis (give or take a few minutes to give the servers a break), so SA's rules will now automatically be kept up to date. This only used to happen if you had set up sa-update yourself (or you had run qtp-sa-update). If you used qtp-sa-update in the past to install rules from openprotect.com channel (formerly rules-du-jour), you *DO NOT* want to run that script again. It will be modified soon, but the change to use these rules is simple. Just edit the /usr/share/spamassassin/sa-update.cron file uncomment the openprotect line, and move it down one line, before the spamassassin.org line. That's all there is to it. The rules will be downloaded and activated with the next sa-update cycle. FWIW, this brings us nearly current. The only packages left are vpopmail, qmailadmin and vqadmin. I hope to get those tested soon. That's all for now. Please post here if you have a problem. -- -Eric 'shubes' - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
