RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
So Scott... Did you use any of these scripts? Did they work? Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 9:10 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Thanks!! On Mar 23, 2011, at 10:37 AM, Michael J. Colvin mcol...@norcalisp.com wrote: Take a look at migrateIMAP.pl. You can find it here: http://www.athensfbc.com/imap_tools/, not to mention a lot of other IMAP tools. I've used this specific script to migrate users from a competitors mail servers to mine when moving a virtual ISP. Worked like a charm. That time, I ran it on my server and pulled the mail, folders and read status over. The customer's never knew they moved... I've used it to move from one server to another on the same network too. Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 4:07 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Yes, they both support imap. On Mar 22, 2011, at 8:07 PM, Michael J. Colvin mcol...@norcalisp.com wrote: Scott: I may have missed what you are trying to do, but I think you're trying to move actual mail folder content from one server to another, one being a QMT and one Modus. Is that right? If so, do they both support IMAP? Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available To run rsync on windoze, you can install cygwin, and then rsync for cygwin. This would only work with maildir mailboxes. No telling what dovecot would do with that junk once it got into the maildirs on QMT. You might still have a problem there. I'd lean toward fetchmail. Fetchmail will retrieve messages via pop3 or imap, and pass them on to qmail-smtpd for scanning and delivery. It's really pretty easy to set up. Here's a sample /root/.fetchmailrc (config) file: [root@tacs-wan ~]# cat .fetchmailrc # These are global options set no bouncemail set postmaster postmas...@mydomain.com set syslog # These are server/user options poll remote.domain.com \ protocol pop3 \ timeout 120 username myuser there \ is myu...@mydomain.com here \ antispam 554 \ fetchall \ password mypass \ smtphost localhost \ ssl \ sslcertck We should have a wiki page on using fetchmail, if we don't already. It's really pretty versatile. -- -Eric 'shubes' On 03/22/2011 02:43 PM, Scott Hughes wrote: My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need
Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
The HDD on my laptop died an ugly death mid last week, so I've had to take care of that first. I hope to be back into this by mid to late this week. Thanks for again for the link and for checking back! Scott On Mar 28, 2011, at 4:44 PM, Michael J. Colvin mcol...@norcalisp.com wrote: So Scott... Did you use any of these scripts? Did they work? Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 9:10 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Thanks!! On Mar 23, 2011, at 10:37 AM, Michael J. Colvin mcol...@norcalisp.com wrote: Take a look at migrateIMAP.pl. You can find it here: http://www.athensfbc.com/imap_tools/, not to mention a lot of other IMAP tools. I've used this specific script to migrate users from a competitors mail servers to mine when moving a virtual ISP. Worked like a charm. That time, I ran it on my server and pulled the mail, folders and read status over. The customer's never knew they moved... I've used it to move from one server to another on the same network too. Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 4:07 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Yes, they both support imap. On Mar 22, 2011, at 8:07 PM, Michael J. Colvin mcol...@norcalisp.com wrote: Scott: I may have missed what you are trying to do, but I think you're trying to move actual mail folder content from one server to another, one being a QMT and one Modus. Is that right? If so, do they both support IMAP? Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available To run rsync on windoze, you can install cygwin, and then rsync for cygwin. This would only work with maildir mailboxes. No telling what dovecot would do with that junk once it got into the maildirs on QMT. You might still have a problem there. I'd lean toward fetchmail. Fetchmail will retrieve messages via pop3 or imap, and pass them on to qmail-smtpd for scanning and delivery. It's really pretty easy to set up. Here's a sample /root/.fetchmailrc (config) file: [root@tacs-wan ~]# cat .fetchmailrc # These are global options set no bouncemail set postmaster postmas...@mydomain.com set syslog # These are server/user options poll remote.domain.com \ protocol pop3 \ timeout 120 username myuser there \ is myu...@mydomain.com here \ antispam 554 \ fetchall \ password mypass \ smtphost localhost \ ssl \ sslcertck We should have a wiki page on using fetchmail, if we don't already. It's really pretty versatile. -- -Eric 'shubes' On 03/22/2011 02:43 PM, Scott Hughes wrote: My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
No problem. Let me know. I like to keep track of scripts that I use to see if they work for others too. Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Monday, March 28, 2011 4:28 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available The HDD on my laptop died an ugly death mid last week, so I've had to take care of that first. I hope to be back into this by mid to late this week. Thanks for again for the link and for checking back! Scott On Mar 28, 2011, at 4:44 PM, Michael J. Colvin mcol...@norcalisp.com wrote: So Scott... Did you use any of these scripts? Did they work? Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 9:10 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Thanks!! On Mar 23, 2011, at 10:37 AM, Michael J. Colvin mcol...@norcalisp.com wrote: Take a look at migrateIMAP.pl. You can find it here: http://www.athensfbc.com/imap_tools/, not to mention a lot of other IMAP tools. I've used this specific script to migrate users from a competitors mail servers to mine when moving a virtual ISP. Worked like a charm. That time, I ran it on my server and pulled the mail, folders and read status over. The customer's never knew they moved... I've used it to move from one server to another on the same network too. Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 4:07 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Yes, they both support imap. On Mar 22, 2011, at 8:07 PM, Michael J. Colvin mcol...@norcalisp.com wrote: Scott: I may have missed what you are trying to do, but I think you're trying to move actual mail folder content from one server to another, one being a QMT and one Modus. Is that right? If so, do they both support IMAP? Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available To run rsync on windoze, you can install cygwin, and then rsync for cygwin. This would only work with maildir mailboxes. No telling what dovecot would do with that junk once it got into the maildirs on QMT. You might still have a problem there. I'd lean toward fetchmail. Fetchmail will retrieve messages via pop3 or imap, and pass them on to qmail-smtpd for scanning and delivery. It's really pretty easy to set up. Here's a sample /root/.fetchmailrc (config) file: [root@tacs-wan ~]# cat .fetchmailrc # These are global options set no bouncemail set postmaster postmas...@mydomain.com set syslog # These are server/user options poll remote.domain.com \ protocol pop3 \ timeout 120 username myuser there \ is myu...@mydomain.com here \ antispam 554 \ fetchall \ password mypass \ smtphost localhost \ ssl \ sslcertck We should have a wiki page on using fetchmail, if we don't already. It's really pretty versatile. -- -Eric 'shubes' On 03/22/2011 02:43 PM, Scott Hughes wrote: My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
Just the one I recommended to Scott... I've used it a couple times to migrate users from one server to another, usually from a server I don't control to one I do...when acquiring new users from another ISP... But, it's also good for migrating from non-qmail servers where filesystems, etc are different... There's one other that I use that does single accounts. I use this when someone moves to our service and wants to pull their existing mail from another provider and maintain the folder structure... Since both of these work by basically logging in via IMAP and pulling the mail, it seems to work pretty reliably, although it's been a while since I've needed to use them for moving people. Seems most people don't use their ISP mail anymore, preferring to use Gmail or something. But, I do find it useful for pulling hosting customer's mail... But, if you look through that page, you might find some that you can think of that may be useful for other people/other implementations of QMT. There are scripts to sync accounts, moving from maildir and Mbox to IMAP, etc...Although I've never used them. The creator of the scripts is/was very helpful. I had an issue with one of the scritps, e-mailed him, and we went back/forth for a few day with him making changes, and me testing until it worked... I was kind of surprised. :-) http://www.athensfbc.com/imap_tools Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Monday, March 28, 2011 4:59 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available On 03/28/2011 04:51 PM, Michael J. Colvin wrote: No problem. Let me know. I like to keep track of scripts that I use to see if they work for others too. Mike Mike, Are there any you have of know of which would be appropriate additions to QTP? -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
Yes, they both support imap. On Mar 22, 2011, at 8:07 PM, Michael J. Colvin mcol...@norcalisp.com wrote: Scott: I may have missed what you are trying to do, but I think you're trying to move actual mail folder content from one server to another, one being a QMT and one Modus. Is that right? If so, do they both support IMAP? Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available To run rsync on windoze, you can install cygwin, and then rsync for cygwin. This would only work with maildir mailboxes. No telling what dovecot would do with that junk once it got into the maildirs on QMT. You might still have a problem there. I'd lean toward fetchmail. Fetchmail will retrieve messages via pop3 or imap, and pass them on to qmail-smtpd for scanning and delivery. It's really pretty easy to set up. Here's a sample /root/.fetchmailrc (config) file: [root@tacs-wan ~]# cat .fetchmailrc # These are global options set no bouncemail set postmaster postmas...@mydomain.com set syslog # These are server/user options poll remote.domain.com \ protocol pop3 \ timeout 120 username myuser there \ is myu...@mydomain.com here \ antispam 554 \ fetchall \ password mypass \ smtphost localhost \ ssl \ sslcertck We should have a wiki page on using fetchmail, if we don't already. It's really pretty versatile. -- -Eric 'shubes' On 03/22/2011 02:43 PM, Scott Hughes wrote: My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
Take a look at migrateIMAP.pl. You can find it here: http://www.athensfbc.com/imap_tools/, not to mention a lot of other IMAP tools. I've used this specific script to migrate users from a competitors mail servers to mine when moving a virtual ISP. Worked like a charm. That time, I ran it on my server and pulled the mail, folders and read status over. The customer's never knew they moved... I've used it to move from one server to another on the same network too. Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 4:07 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Yes, they both support imap. On Mar 22, 2011, at 8:07 PM, Michael J. Colvin mcol...@norcalisp.com wrote: Scott: I may have missed what you are trying to do, but I think you're trying to move actual mail folder content from one server to another, one being a QMT and one Modus. Is that right? If so, do they both support IMAP? Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available To run rsync on windoze, you can install cygwin, and then rsync for cygwin. This would only work with maildir mailboxes. No telling what dovecot would do with that junk once it got into the maildirs on QMT. You might still have a problem there. I'd lean toward fetchmail. Fetchmail will retrieve messages via pop3 or imap, and pass them on to qmail-smtpd for scanning and delivery. It's really pretty easy to set up. Here's a sample /root/.fetchmailrc (config) file: [root@tacs-wan ~]# cat .fetchmailrc # These are global options set no bouncemail set postmaster postmas...@mydomain.com set syslog # These are server/user options poll remote.domain.com \ protocol pop3 \ timeout 120 username myuser there \ is myu...@mydomain.com here \ antispam 554 \ fetchall \ password mypass \ smtphost localhost \ ssl \ sslcertck We should have a wiki page on using fetchmail, if we don't already. It's really pretty versatile. -- -Eric 'shubes' On 03/22/2011 02:43 PM, Scott Hughes wrote: My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
Thanks!! On Mar 23, 2011, at 10:37 AM, Michael J. Colvin mcol...@norcalisp.com wrote: Take a look at migrateIMAP.pl. You can find it here: http://www.athensfbc.com/imap_tools/, not to mention a lot of other IMAP tools. I've used this specific script to migrate users from a competitors mail servers to mine when moving a virtual ISP. Worked like a charm. That time, I ran it on my server and pulled the mail, folders and read status over. The customer's never knew they moved... I've used it to move from one server to another on the same network too. Mike -Original Message- From: Scott Hughes [mailto:sonicscott9...@gmail.com] Sent: Wednesday, March 23, 2011 4:07 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Yes, they both support imap. On Mar 22, 2011, at 8:07 PM, Michael J. Colvin mcol...@norcalisp.com wrote: Scott: I may have missed what you are trying to do, but I think you're trying to move actual mail folder content from one server to another, one being a QMT and one Modus. Is that right? If so, do they both support IMAP? Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available To run rsync on windoze, you can install cygwin, and then rsync for cygwin. This would only work with maildir mailboxes. No telling what dovecot would do with that junk once it got into the maildirs on QMT. You might still have a problem there. I'd lean toward fetchmail. Fetchmail will retrieve messages via pop3 or imap, and pass them on to qmail-smtpd for scanning and delivery. It's really pretty easy to set up. Here's a sample /root/.fetchmailrc (config) file: [root@tacs-wan ~]# cat .fetchmailrc # These are global options set no bouncemail set postmaster postmas...@mydomain.com set syslog # These are server/user options poll remote.domain.com \ protocol pop3 \ timeout 120 username myuser there \ is myu...@mydomain.com here \ antispam 554 \ fetchall \ password mypass \ smtphost localhost \ ssl \ sslcertck We should have a wiki page on using fetchmail, if we don't already. It's really pretty versatile. -- -Eric 'shubes' On 03/22/2011 02:43 PM, Scott Hughes wrote: My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
I upgraded my test server and it was a breeze. Took less than 10 minutes! The bad news is that the new version of Dovecot did not solve my issue regarding the FORWARD flag. Bummer! Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 12:44 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available On 03/22/2011 06:44 AM, Peter Peltonen wrote: On Mon, Mar 21, 2011 at 4:01 AM, Eric Shuberte...@shubes.net wrote: These are available now in the QTP repo. Is there any security reason to upgrade Dovecot? I am running dovecot-1.0.10-1.3.1 without any problems. And if ain't broken, then... Best, Peter - I should say, though, that upgrading is pretty easy, just a matter of a couple minutes. Much easier than migrating from Courier. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
Yes, I did Google it. Some comments on different issues involving the FORWARD flag, but that is about it. My first post to the Dovecot list went unanswered, so I don't hold much hope for this second one. ;o) Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 3:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available I saw your post on the dovecot list. It'll be interesting to see what they say. Have you googled the FORWARD flag? I know nothing about it. -- -Eric 'shubes' On 03/22/2011 01:36 PM, Scott Hughes wrote: I upgraded my test server and it was a breeze. Took less than 10 minutes! The bad news is that the new version of Dovecot did not solve my issue regarding the FORWARD flag. Bummer! Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 12:44 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available On 03/22/2011 06:44 AM, Peter Peltonen wrote: On Mon, Mar 21, 2011 at 4:01 AM, Eric Shuberte...@shubes.net wrote: These are available now in the QTP repo. Is there any security reason to upgrade Dovecot? I am running dovecot-1.0.10-1.3.1 without any problems. And if ain't broken, then... Best, Peter - I should say, though, that upgrading is pretty easy, just a matter of a couple minutes. Much easier than migrating from Courier. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
I think that the FORWARD flag is something normal (RFC-wise). I am seeing quite a bit about it. I will check into fetchmail and rsync (those two are new to me). Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:00 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Is it something per RFC, or something unique to your old mail system? How is the email stored on the old server? Perhaps use rsync or fetchmail instead of imapsync? (Never heard of imapsync myself) -- -Eric 'shubes' On 03/22/2011 01:52 PM, Scott Hughes wrote: Yes, I did Google it. Some comments on different issues involving the FORWARD flag, but that is about it. My first post to the Dovecot list went unanswered, so I don't hold much hope for this second one. ;o) Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 3:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available I saw your post on the dovecot list. It'll be interesting to see what they say. Have you googled the FORWARD flag? I know nothing about it. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. -- -Eric 'shubes' On 03/22/2011 02:17 PM, Scott Hughes wrote: I think that the FORWARD flag is something normal (RFC-wise). I am seeing quite a bit about it. I will check into fetchmail and rsync (those two are new to me). Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:00 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available Is it something per RFC, or something unique to your old mail system? How is the email stored on the old server? Perhaps use rsync or fetchmail instead of imapsync? (Never heard of imapsync myself) - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
Scott: I may have missed what you are trying to do, but I think you're trying to move actual mail folder content from one server to another, one being a QMT and one Modus. Is that right? If so, do they both support IMAP? Mike -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available To run rsync on windoze, you can install cygwin, and then rsync for cygwin. This would only work with maildir mailboxes. No telling what dovecot would do with that junk once it got into the maildirs on QMT. You might still have a problem there. I'd lean toward fetchmail. Fetchmail will retrieve messages via pop3 or imap, and pass them on to qmail-smtpd for scanning and delivery. It's really pretty easy to set up. Here's a sample /root/.fetchmailrc (config) file: [root@tacs-wan ~]# cat .fetchmailrc # These are global options set no bouncemail set postmaster postmas...@mydomain.com set syslog # These are server/user options poll remote.domain.com \ protocol pop3 \ timeout 120 username myuser there \ is myu...@mydomain.com here \ antispam 554 \ fetchall \ password mypass \ smtphost localhost \ ssl \ sslcertck We should have a wiki page on using fetchmail, if we don't already. It's really pretty versatile. -- -Eric 'shubes' On 03/22/2011 02:43 PM, Scott Hughes wrote: My old email is a windows based server called ModusMail by a company called Vircom. In looking at rsync, I'm not sure if it would work or not. I can't seem to find and RFCs on the IMAP flags. Strange. Thanks, Scott -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Tuesday, March 22, 2011 4:33 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available rsync would probably be simplest if your old server was using maildir format. Good for doing preliminary runs too before cutting over, so there's not much mail to migrate after the change. Otherwise, I think I'd try fetchmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
On 03/23/2011 02:29 AM, Eric Shubert wrote: Is it something per RFC, or something unique to your old mail system? How is the email stored on the old server? Perhaps use rsync or fetchmail instead of imapsync? (Never heard of imapsync myself) I've used imapsync before. It's a perl script that preserves read, unread and delete flags http://freshmeat.net/projects/imapsync/ Bharath - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
RE: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
I could not find dovecot in the repo mail m...@mjw.se telefon 0104906298 -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Monday, March 21, 2011 1:08 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available I didn't forget you, Scott. There already is! (near the end) :) -- -Eric 'shubes' On 03/20/2011 08:25 PM, Scott Hughes wrote: Thanks Eric! Is there going to be a section on upgrading from the 1.2.3 version of dovecot to this new one? Scott On Mar 20, 2011, at 9:01 PM, Eric Shuberte...@shubes.net wrote: These are available now in the QTP repo. Documentation on the wiki has been updated: http://wiki.qmailtoaster.com/index.php/Replacing_Courier_IMAP_with_Do vecot_IMAP Thanks to everyone who helped in getting this going (you know who you are). -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
Thanks Eric. I was trying to read the page on my iPhone and missed it. You mentioned that we who are upgrading should disable the services (dovecot 1.2.3 logging) from running. How does one go about that with these types of services? Thanks again for the write-up! I've built a test server and am going to do a mock change-over tomorrow. Scott On Mar 21, 2011, at 7:07 AM, Eric Shubert e...@shubes.net wrote: I didn't forget you, Scott. There already is! (near the end) :) -- -Eric 'shubes' On 03/20/2011 08:25 PM, Scott Hughes wrote: Thanks Eric! Is there going to be a section on upgrading from the 1.2.3 version of dovecot to this new one? Scott On Mar 20, 2011, at 9:01 PM, Eric Shuberte...@shubes.net wrote: These are available now in the QTP repo. Documentation on the wiki has been updated: http://wiki.qmailtoaster.com/index.php/Replacing_Courier_IMAP_with_Dovecot_IMAP Thanks to everyone who helped in getting this going (you know who you are). -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Dovecot 2.0.11 rpms for QMT available
I understand now. Thanks, Scott On Mar 21, 2011, at 8:19 PM, Eric Shubert e...@shubes.net wrote: Same way as you would disable courier imap, as in the wiki page. If you created supervise directory trees with run files, you need to put a down file (an empty file, literally named down) next to the run files for the service and the log. This keeps the supervise daemon from starting the service. See examples in the wiki. On 03/21/2011 06:01 PM, Scott Hughes wrote: Thanks Eric. I was trying to read the page on my iPhone and missed it. You mentioned that we who are upgrading should disable the services (dovecot 1.2.3 logging) from running. How does one go about that with these types of services? Thanks again for the write-up! I've built a test server and am going to do a mock change-over tomorrow. Scott On Mar 21, 2011, at 7:07 AM, Eric Shuberte...@shubes.net wrote: I didn't forget you, Scott. There already is! (near the end) :) -- -Eric 'shubes' On 03/20/2011 08:25 PM, Scott Hughes wrote: Thanks Eric! Is there going to be a section on upgrading from the 1.2.3 version of dovecot to this new one? Scott On Mar 20, 2011, at 9:01 PM, Eric Shuberte...@shubes.net wrote: These are available now in the QTP repo. Documentation on the wiki has been updated: http://wiki.qmailtoaster.com/index.php/Replacing_Courier_IMAP_with_Dovecot_IMAP Thanks to everyone who helped in getting this going (you know who you are). -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com