Re: [Quantum Owners] Zetec alternator conversion pulley?

2018-08-26 Thread Susan and Martin Scott 
My long -term memory may be hazey, but ISTR the zetec front end accessory 
drives were different depending on whether the engine was used in Focus or 
Mondeo, and whether air con is fitted. The main thing to consider is that the 
water pump has to run in the correct direction - whether it is ribbed or plain 
on the pulley is a good indication unless the pulley has been swapped. It will 
(almost undoubtedly) be possible to get what you require using genuine Ford (or 
pattern) parts without going to 'specials'. The wrap around of the belt needs 
to be sufficient for the purpose, so a 'web-site' fix which only gives 10 
degrees of wrap on the water pump pulley probably won't do the job. 
There may be a part number on the part, but sometimes this isn't helpful 
because it's the casting part number (not the finished part) - very frustrating!
Martin
  - Original Message - 
  From: Ken Needham 
  To: quantumowners@googlegroups.com 
  Sent: Sunday, August 26, 2018 11:43 AM
  Subject: [Quantum Owners] Zetec alternator conversion pulley?


  Hi, A conversion of the Zetec enables the alternator to be fitted under the 
inlet manifold by using an “extra” ribbed pulley between the alternator and the 
water pump.

  My pulley is starting to break up but I can’t find any reference as to the 
origin of the pulley.

  Does anyone know?

  Also I have been unable to access Jim’s website, is anything wrong?

  Best regards

  Ken

   

  Sent from Mail for Windows 10

   


   Virus-free. www.avg.com  


  -- 
  -- 
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
  To post to this group, send email to quantumowners@googlegroups.com
  To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
  For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en
   
  IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
  --- 
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to quantumowners+unsubscr...@googlegroups.com.
  For more options, visit https://groups.google.com/d/optout.

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [Quantum Owners] Zetec alternator conversion pulley?

2018-08-26 Thread bill 
Hi Ken, take a look on retro ford web site, they do a lot of the conversion 
parts for engine swaps.
Bill

Sent from my iPhone

On 26 Aug 2018, at 11:43, Ken Needham 
mailto:fixit-wo...@hotmail.co.uk>> wrote:

Hi, A conversion of the Zetec enables the alternator to be fitted under the 
inlet manifold by using an “extra” ribbed pulley between the alternator and the 
water pump.
My pulley is starting to break up but I can’t find any reference as to the 
origin of the pulley.
Does anyone know?
Also I have been unable to access Jim’s website, is anything wrong?
Best regards
Ken

Sent from Mail for Windows 10


--
--
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to 
quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
---
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Quantum Owners] Zetec alternator conversion pulley?

2018-08-26 Thread Ken Needham 
Hi, A conversion of the Zetec enables the alternator to be fitted under the 
inlet manifold by using an “extra” ribbed pulley between the alternator and the 
water pump.
My pulley is starting to break up but I can’t find any reference as to the 
origin of the pulley.
Does anyone know?
Also I have been unable to access Jim’s website, is anything wrong?
Best regards
Ken

Sent from Mail for Windows 10

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.