Re: [qubes-devel] clocksync service is not enabled on any vm's in rc4
On Saturday, 17 February 2018 15:07:55 UTC, Elias Mårtenson wrote: > On Saturday, 17 February 2018 22:55:20 UTC+8, Marek Marczykowski-Górecki > wrote: > > > That's weird, it should be enabled in sys-net by default. Did you had > > any problems during installation, requiring manual sys-net setup? > > The installation worked fine as far as I can tell. > > The only unusual thing was after initial boot, when it initialises the system > for the first time (the part where you answer which vm's you want created, > etc). After I had done this, you're supposed to click "finish" (or something > to that effect) but I accidentally clicked on the same button again. This > caused the installer to run again. > > I don't think that would cause any issues, but that's the only thing I did > that was out of the ordinary. > > After adding the clocksync service to sys-net, activating it, and rebooting, > the time is now properly synchronised. > > Regards, > Elias I can confirm that I had the same problem. I did the same mistake during install on one of my systems, not sure it was on the one at fault, but quite probably. Another system I installed later is fine (I probably did not do the install mistake). -- You received this message because you are subscribed to the Google Groups "qubes-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-devel+unsubscr...@googlegroups.com. To post to this group, send email to qubes-devel@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-devel/839695ae-5e75-4852-ab25-3d78cdcf1407%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-devel] clocksync service is not enabled on any vm's in rc4
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On Sat, Feb 17, 2018 at 01:48:00AM -0800, Elias Mårtenson wrote: > After installing rc4, I noticed that sys-net did not have the clocksync > service enabled. In fact, clocksync was not enabled on any of the vm's. > > I noticed this after my computer's clock was off by one minute. > > Other than enabling this service on sys-net, is there anything else I need to > do to get time synchronisation working? That's weird, it should be enabled in sys-net by default. Did you had any problems during installation, requiring manual sys-net setup? There was a bug causing systemd-timesyncd service starting too soon and it failed to notice 'clocksync' service file (fix in current-testing repo). But according to qvm-service tool the service should be enabled in any case. - -- Best Regards, Marek Marczykowski-Górecki Invisible Things Lab A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? -BEGIN PGP SIGNATURE- iQEzBAEBCAAdFiEEhrpukzGPukRmQqkK24/THMrX1ywFAlqIQjUACgkQ24/THMrX 1yz/pAgAgFouXdopDn5VbgWA03EVUl0aMaxSZ9jAIZgT8giU4Ah/56b2rth2aJC7 o4WQ1Q8T8dtza58i8bfZarssZ9U19Tc1R8dGBNQhgWWAjbtsSUh/kDiO8KbsM8Vm 8iZ+KMiHCdt5wV32Vxk2piWxudS/YkWLGzZbD7d4CY64K6LEnJL6Fp/IAXy6OlUl uTv9yDiQBluOp2DE35JaziKxQ10mrLPgkZM7xZf4FmZssgYW9sx6ocIb0yQq+rKv C9VoHc87Lun55gGWLSsHivu1YOliOlztWu4KSr5p0w1RSkR25T4I/wyT00K1bhl0 SdOSP1gbsdJv+2ECuqNQL1ZolRQiPg== =m6aE -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-devel+unsubscr...@googlegroups.com. To post to this group, send email to qubes-devel@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-devel/20180217145453.GP2084%40mail-itl. For more options, visit https://groups.google.com/d/optout.
[qubes-devel] clocksync service is not enabled on any vm's in rc4
After installing rc4, I noticed that sys-net did not have the clocksync service enabled. In fact, clocksync was not enabled on any of the vm's. I noticed this after my computer's clock was off by one minute. Other than enabling this service on sys-net, is there anything else I need to do to get time synchronisation working? Regards, Elias -- You received this message because you are subscribed to the Google Groups "qubes-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-devel+unsubscr...@googlegroups.com. To post to this group, send email to qubes-devel@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-devel/d6be960c-4ae8-4589-af29-9617012f4915%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
