Before installing Qubes-R4.0-rc4-x86_64 on my laptop in UEFI mode but not secure boot, I first had to follow the instructions on https://www.qubes-os.org/doc/thinkpad-troubleshooting/ summarized below:
<quote>In a nutshell, you need to use the Fedora livecd-tools to make a Qubes Installation USB Stick from the Qubes ISO image, then update the label on the partition of that USB stick to “BOOT”, and then update the BOOT/EFI/xen.cfg file on the USB stick so that all labels point to BOOT.</quote> Then it installed properly. However, there still seems to be some issues as reported by dmesg output below. ---------------------------------- ~]$ sudo dmesg --notime --show-delta --level=err,warn [< 0.000000>] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload-210) [< 0.000011>] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170728/psobject-252) [< 0.000229>] ACPI Exception: AE_NOT_FOUND, (SSDT:ProjSsdt) while loading table (20170728/tbxfload-228) [< 0.012538>] ACPI Error: 1 table load failures, 11 successful (20170728/tbxfload-246) [< 0.003614>] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [< 0.000001>] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [< 0.001585>] cpu 0 spinlock event irq 121 [< 0.001459>] cpu 1 spinlock event irq 133 [< 0.000567>] cpu 2 spinlock event irq 140 [< 0.000315>] cpu 3 spinlock event irq 147 [< 0.000803>] cpu 4 spinlock event irq 154 [< 0.000200>] cpu 5 spinlock event irq 161 [< 0.000787>] cpu 6 spinlock event irq 168 [< 0.000184>] cpu 7 spinlock event irq 175 [< 0.001973>] Grant table initialized [< 1.030409>] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [< 0.026886>] hpet_acpi_add: no address or irqs in _CRS [< 1.260721>] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [< 0.000067>] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [< 0.021726>] i915: unknown parameter 'preliminary_hw_support' ignored [< 0.008035>] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100) [< 0.000105>] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100) [< 0.373511>] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ IBUS ] [< 0.001572>] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ] [< 0.874699>] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [< 69.549364>] device-mapper: thin: Data device (dm-2) discard unsupported: Disabling discard passdown. [< 0.466515>] systemd: 26 output lines suppressed due to ratelimiting [< 0.708450>] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [< 5.237246>] kauditd_printk_skb: 81 callbacks suppressed [< 88.634764>] kauditd_printk_skb: 1 callbacks suppressed [< 10.806499>] kauditd_printk_skb: 7 callbacks suppressed [< 72.680640>] kauditd_printk_skb: 1 callbacks suppressed [< 11.120214>] kauditd_printk_skb: 7 callbacks suppressed [< 78.707516>] kauditd_printk_skb: 1 callbacks suppressed [< 10.752228>] kauditd_printk_skb: 7 callbacks suppressed [< 75.713107>] kauditd_printk_skb: 1 callbacks suppressed [< 11.964648>] kauditd_printk_skb: 7 callbacks suppressed [< 66.095443>] kauditd_printk_skb: 147 callbacks suppressed [< 6.035025>] kauditd_printk_skb: 82 callbacks suppressed [< 5.029873>] kauditd_printk_skb: 102 callbacks suppressed [< 5.544555>] kauditd_printk_skb: 90 callbacks suppressed [< 5.002831>] kauditd_printk_skb: 88 callbacks suppressed [< 41.219150>] kauditd_printk_skb: 34 callbacks suppressed [< 36.255902>] xen_pciback: 0000:00:14.0: cannot enable memory-write-invalidate (-22) [< 142.443039>] kauditd_printk_skb: 4 callbacks suppressed [< 198.824432>] kauditd_printk_skb: 5 callbacks suppressed ---------------------------------- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/167ebaa8-4633-49d5-aa6a-23c550cfb5d8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
