Hi qubes-users, I'm using Qubes OS for my pentests at work, I have some issues trying to connect my Alfa network wireless USB card in my Kali AppVM though.
I chose to install kali manually as explained here : https://www.qubes-os.org/doc/pentesting/kali/#templatevm-from-debian3_2 It works fine ! However, when I plug & add the wireless device to my kali AppVM I can't make it works. Here the lsusb result in my kali-rolling Template, I had to blacklist the rt2800usb module : $ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Both firware-ralink and firmware-misc-nonfree are installed. Build-essential too. When I try to install the driver from the official website (https://www.alfa.com.tw/files/?dir=%5B1%5D%20WiFi%20USB%20adapter/AWUS036H/Linux), here the feedback : $ make make[1]: Entering directory '/lib/modules/4.14.74-1.pvops.qubes.x86_64/build' make[1]: *** No rule to make target 'WiFi'. Stop. make[1]: Leaving directory '/lib/modules/4.14.74-1.pvops.qubes.x86_64/build' make: *** [Makefile:15: all] Error 2 $ uname -r 4.14.74-1.pvops.qubes.x86_64 $ sudo dmesg [ 12.078758] Netfilter messages via NETLINK v0.30. [ 12.106149] nf_tables: (c) 2007-2009 Patrick McHardy <ka...@trash.net> [ 12.242556] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pa...@netfilter.org> [ 12.521504] nf_conntrack version 0.5.0 (2560 buckets, 10240 max) [ 12.887695] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.487105] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 30.487171] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1 [ 30.487501] vhci_hcd: created sysfs vhci_hcd.0 [ 30.487556] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 30.487575] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.487597] usb usb1: Product: USB/IP Virtual Host Controller [ 30.487616] usb usb1: Manufacturer: Linux 4.14.74-1.pvops.qubes.x86_64 vhci_hcd [ 30.487637] usb usb1: SerialNumber: vhci_hcd.0 [ 30.489603] hub 1-0:1.0: USB hub found [ 30.489628] hub 1-0:1.0: 8 ports detected [ 30.490953] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 30.491249] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2 [ 30.491298] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 30.491356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 30.491375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.491397] usb usb2: Product: USB/IP Virtual Host Controller [ 30.491415] usb usb2: Manufacturer: Linux 4.14.74-1.pvops.qubes.x86_64 vhci_hcd [ 30.491436] usb usb2: SerialNumber: vhci_hcd.0 [ 30.491552] hub 2-0:1.0: USB hub found [ 30.491582] hub 2-0:1.0: 8 ports detected [ 30.640047] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(0) [ 30.640073] vhci_hcd vhci_hcd.0: devid(196611) speed(3) speed_str(high-speed) [ 30.858179] usb 1-1: new high-speed USB device number 2 using vhci_hcd [ 30.976353] usb 1-1: SetAddress Request (2) to port 0 [ 31.015322] usb 1-1: New USB device found, idVendor=148f, idProduct=3070 [ 31.015404] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 31.015489] usb 1-1: Product: 802.11 n WLAN [ 31.015534] usb 1-1: Manufacturer: Ralink [ 31.015578] usb 1-1: SerialNumber: 1.0 [ 1854.054576] blkfront: xvdd: empty flush op failed [ 1854.054599] blkfront: xvdd: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; [ 1974.675502] vhci_hcd: connection closed [ 1974.675558] vhci_hcd: stop threads [ 1974.675584] vhci_hcd: release socket [ 1974.675597] vhci_hcd: disconnect device [ 1974.675640] usb 1-1: USB disconnect, device number 2 [ 1978.730922] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(0) [ 1978.730950] vhci_hcd vhci_hcd.0: devid(196611) speed(3) speed_str(high-speed) [ 1978.954198] usb 1-1: new high-speed USB device number 3 using vhci_hcd [ 1979.072270] usb 1-1: SetAddress Request (3) to port 0 [ 1979.110312] usb 1-1: New USB device found, idVendor=148f, idProduct=3070 [ 1979.110397] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1979.110478] usb 1-1: Product: 802.11 n WLAN [ 1979.110612] usb 1-1: Manufacturer: Ralink [ 1979.110656] usb 1-1: SerialNumber: 1.0 Thank you for your help ! Regards, Mathew -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1d238b96-207c-4092-8141-87c7766e9ef2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
