Re: [qubes-users] Re: how to reinstall whonix-14 templates
On Friday, July 12, 2019 at 12:48:04 AM UTC+3, panina wrote: > On Mon, 2019-07-08 at 22:03 -0700, Claudio Chinicz wrote: > > > > On Monday, 8 July 2019 11:37:35 UTC+3, Claudio Chinicz wrote: > > > > > Hi, > > > > > > > > > I've broken my whonix-gw-14 when trying to upgrade to whonix-15 and > > > ended up removing both gw and ws templates for version 14. > > > > > > > > > I'me trying to reinstall following instructions from > > > https://www.qubes-os.org/doc/templates/ but it does not work. > > > > > > > > > Anyone can help with instructions to download whonix-14 from > > > scratch? > > > > > > > > > Thanks in advance, > > > > Claudio > > > > > > > Not an answer to the follow-up question, but: > > I recently installed whonix-15 from scratch, and did it from instructions > from whonix' webpage. They have qubes-specific instructions, including > instructions referring to upgrading from 14 to 15. > > > > > Anyway, I used the qubes salt command to install and set everything up, `sudo > qubesctl state.sls qvm.anon-whonix`. It is quiet, and takes ages, and says > nothing, and may not be aborted. This is annoying. But if it's allowed to run > uninteruppted, it'll do the job. > > > > > <3 > > /panina > > > > > > > > > > > > > > > > > Hi Chris, > > > > > > > I tried on dom0 to issue the commands and I got a message "using sys- > > firewall as UpdateVM to download updates for Dom0; this may take some > > time..." but nothing happened. > > > > > > > Did I do something wrong? did I miss something? > > > > > > > Thanks > > > Hi Panina, Thanks for replying. I've tried 'sudo qubesctl state.sls qvm.anon-whonix' but got an error (see below). Actually, as I had removed all whonix related templates and AppVMs manually, when I ran the above command I've got 7 errors and I then created AppVMs named "whonix-gw-15", "whonix-ws-15", "anon-whonix", "sys-whonix" and "whonix-ws-15-dvm", all based on Debian 9, and the number of errors reduced to just 2. Any ideas what may have gone wrong? Regards [claudio@dom0 ~]$ sudo qubesctl state.sls qvm.anon-whonix [ERROR ] Command '['systemd-run', '--scope', 'qubes-dom0-update', '-y', '--best', '--allowerasing', '--disablerepo=*', '--enablerepo=qubes-templates-community-testing', '--clean', '--action=install', 'qubes-template-whonix-ws-15']' failed with return code: 1 [ERROR ] stdout: Running scope as unit: run-r1789c0ddd26148eda963d137c81386a6.scope Using mirage-firewall-wifi as UpdateVM to download updates for Dom0; this may take some time... [ERROR ] retcode: 1 [ERROR ] Error occurred installing package(s). Additional info follows: errors: - Running scope as unit: run-r1789c0ddd26148eda963d137c81386a6.scope Using mirage-firewall-wifi as UpdateVM to download updates for Dom0; this may take some time... [ERROR ] Command '['systemd-run', '--scope', 'qubes-dom0-update', '-y', '--best', '--allowerasing', '--disablerepo=*', '--enablerepo=qubes-templates-community-testing', '--action=install', 'qubes-template-whonix-gw-15']' failed with return code: 1 [ERROR ] stdout: Running scope as unit: run-rd5f513c50db443948c87208dba3e2b67.scope Using mirage-firewall-wifi as UpdateVM to download updates for Dom0; this may take some time... [ERROR ] retcode: 1 [ERROR ] Error occurred installing package(s). Additional info follows: errors: - Running scope as unit: run-rd5f513c50db443948c87208dba3e2b67.scope Using mirage-firewall-wifi as UpdateVM to download updates for Dom0; this may take some time... local: -- ID: template-whonix-ws-15 Function: pkg.installed Name: qubes-template-whonix-ws-15 Result: False Comment: Error occurred installing package(s). Additional info follows: errors: - Running scope as unit: run-r1789c0ddd26148eda963d137c81386a6.scope Using mirage-firewall-wifi as UpdateVM to download updates for Dom0; this may take some time... Started: 16:53:01.289456 Duration: 5021.715 ms Changes: -- ID: whonix-ws-tag Function: qvm.vm Name: whonix-ws-15 Result: True Comment: == ['features'] == [SKIP] Feature already in desired state: ENABLE 'whonix-ws' = Enabled == ['tags'] == [SKIP] All requested tags already set: created-by-dom0,whonix-updatevm Started: 16:53:06.313710 Duration: 93.93 ms Changes: -- ID: whonix-ws-update-policy Function: file.prepend Name: /etc/qubes-rpc/policy/qubes.UpdatesProxy Result: True Comment: File /etc/qubes-rpc/policy/qubes.UpdatesProxy is in correct
Re: [qubes-users] Re: how to reinstall whonix-14 templates
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 11/07/2019 4.47 PM, panina wrote: > [...] > > Not an answer to the follow-up question, but: I recently installed > whonix-15 from scratch, and did it from instructions from whonix' > webpage. They have qubes-specific instructions, including > instructions referring to upgrading from 14 to 15. Anyway, I used > the qubes salt command to install and set everything up, `sudo > qubesctl state.sls qvm.anon-whonix`. It is quiet, and takes ages, > and says nothing, and may not be aborted. FWIW, there is an issue open to address part of this: https://github.com/QubesOS/qubes-issues/issues/4215 > This is annoying. But if it's allowed to run uninteruppted, it'll > do the job. <3 /panina - -- Andrew David Wong (Axon) Community Manager, Qubes OS https://www.qubes-os.org -BEGIN PGP SIGNATURE- iQIzBAEBCgAdFiEEZQ7rCYX0j3henGH1203TvDlQMDAFAl0n0vkACgkQ203TvDlQ MDAguxAAqKFYE3rIHjkVQRZK1QcLR5bfuEy+kxdQP/xaPuSdxyKh9pGGQkflB8AG OM8f+nZhhfCp1K1x/Zee9rNbjlrppNKefaxaXjlpgjl89kZ6GXyj3XGZ2Yqx2fuD V8mG3leHacXTJC+y+42pWMe7oYrULlbVKNQRLvJetSOIE/vxoNAXvxqbZpCXPgdO TVJoB6/liQWxait4BI5CdNVhkCsZU5mm6THhsaP0MMcXXt/YgQ2X/XXfuG3171jE lODcWTn+4sbjcaNvJji2QKAVd69Cr0lt+bSa+pcZiWpnc0+Z5d1voSnoQrkkOlVI QaKkqlj/tYu1v3lIG87g/idfRjEqhEOmZ31Rwo9TGRKFJgVY5QmupKvDA9W+0qnr KRLVkn0Xnh83HfZeEEUIGKLOWfr9VLQ4zcpxYVqeuAx+xUZsYyAco4skgOaY7iMh ZNp+QQqS8vL4vNLyO6QiQOn8d2wkIfmmtzgz0T88WgkU6D87braT6qDX/2dsGOC8 HtkKvY9CMQwWOMzpGnRXpfMFbWdvydikr6OHW29uKggYyxSE8AfTCPor4DffCXuY 5c3vlpmcy4Cv9zKTjac6yFj+9g9vvvJVJduttjhu/7KOMcqKFDfJ/OrQ4yMJ8bM9 WCKPPXCyRU/WQpjUrxiHS6MgHhUdFZjezidKOZ2TAOMDKJKSNw0= =RbIB -END PGP SIGNATURE- -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/046a00f5-3dd9-98b6-db26-f9d8805221d5%40qubes-os.org. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: how to reinstall whonix-14 templates
On Mon, 2019-07-08 at 22:03 -0700, Claudio Chinicz wrote: > > On Monday, 8 July 2019 11:37:35 UTC+3, Claudio Chinicz wrote: >> > > Hi, >> > > >> > > I've broken my whonix-gw-14 when trying to upgrade to whonix-15 >> and> > ended up removing both gw and ws templates for version 14. >> > > >> > > I'me trying to reinstall following instructions from > > >> https://www.qubes-os.org/doc/templates/ but it does not work. >> > > >> > > Anyone can help with instructions to download whonix-14 from> > >> scratch? >> > > >> > > Thanks in advance, >> > > Claudio Not an answer to the follow-up question, but: I recently installed whonix-15 from scratch, and did it from instructions from whonix' webpage. They have qubes-specific instructions, including instructions referring to upgrading from 14 to 15. Anyway, I used the qubes salt command to install and set everything up, `sudo qubesctl state.sls qvm.anon-whonix`. It is quiet, and takes ages, and says nothing, and may not be aborted. This is annoying. But if it's allowed to run uninteruppted, it'll do the job. <3 /panina > > > > Hi Chris, > > > > I tried on dom0 to issue the commands and I got a message "using sys- > > firewall as UpdateVM to download updates for Dom0; this may take > some> time..." but nothing happened. > > > > Did I do something wrong? did I miss something? > > > > Thanks > > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c974b541-3618-8103-0321-1b3fd24bcfbe%40nonbinary.me. For more options, visit https://groups.google.com/d/optout. signature.asc Description: OpenPGP digital signature
[qubes-users] Re: how to reinstall whonix-14 templates
On Monday, 8 July 2019 11:37:35 UTC+3, Claudio Chinicz wrote: > Hi, > > I've broken my whonix-gw-14 when trying to upgrade to whonix-15 and ended up > removing both gw and ws templates for version 14. > > I'me trying to reinstall following instructions from > https://www.qubes-os.org/doc/templates/ but it does not work. > > Anyone can help with instructions to download whonix-14 from scratch? > > Thanks in advance, > Claudio Hi Chris, I tried on dom0 to issue the commands and I got a message "using sys-firewall as UpdateVM to download updates for Dom0; this may take some time..." but nothing happened. Did I do something wrong? did I miss something? Thanks -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/fe26c995-bd47-4759-913d-743cf0854f1e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
