On 19 dez, 09:43, Rob van der Putten <r...@sput.nl> wrote: > Hi there > > David L. Mills wrote: > > I am told the file is on all NTP servers operated by NIST. See the list > > of public servers at NIST orwww.ntp.org. > > ftp://ntp-a.boulder.nist.gov/pub/leap-seconds.3427142400works > Thanks! > > Regards, > Rob
Hi there, I used the below tutorial to set the leapseconds, but, the "leap_armed" is not showed when the command "ntpq" is executed. I´m using freebsd 7.0 and the ntp version "ntp-dev-4.2.5p150". : What can be wrong ? Thank´s ############ NTPQ ################# a# ntpq -c "rv" status=01fd leap_none, sync_atomic, 15 events, event_13, version="ntpd 4.2.5p...@1.1795-o Fri Dec 19 16:47:03 UTC 2008 (1)", processor="i386", system="FreeBSD/7.0-RELEASE-p6", leap=00, stratum=1, precision=-19, rootdelay=0.000, rootdisp=0.239, refid=PPS, reftime=ccf66913.a1585ecd Fri, Dec 19 2008 16:40:19.630, clock=ccf66914.66d46964 Fri, Dec 19 2008 16:40:20.401, peer=49506, tc=4, mintc=2, offset=0.002, frequency=40.487, sys_jitter=0.003, clk_jitter=0.000, clk_wander=0.000, tai=33, leapsec=200901010000, expire=200906280000 ################################# ################## LOG ####################### # /usr/local/bin/ntpd -d -g -c /etc/ntp.conf -p /var/run/ntpd.pid -f / var/db/ntpd.drift ntpd 4.2.5p...@1.1795-o Fri Dec 19 16:47:03 UTC 2008 (1) addto_syslog: proto: precision = 1.396 usec addto_syslog: ntp_io: estimated max descriptors: 11095, initial socket boundary: 20 addto_syslog: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled addto_syslog: Listening on interface #1 wildcard, ::#123 Disabled addto_syslog: Listening on interface #2 bce1, 200.160.7.186#123 Enabled restrict: addr c8a007ba mask ffffffff mflags 00003000 flags 00000001 addto_syslog: Listening on interface #3 lo0, fe80::1#123 Enabled addto_syslog: Listening on interface #4 lo0, ::1#123 Enabled addto_syslog: Listening on interface #5 lo0, 127.0.0.1#123 Enabled restrict: addr 7f000001 mask ffffffff mflags 00003000 flags 00000001 addto_syslog: Listening on routing socket on fd #26 for interface updates loop_config: item 1 freq 0.000000 event at 0 0.0.0.0 c010 0d system event: kern kernel time sync enabled restrict: addr 00000000 mask 00000000 mflags 00000000 flags 00000192 restrict: addr c8a00300 mask ffffff00 mflags 00000000 flags 000001b0 restrict: addr c8a00500 mask ffffff00 mflags 00000000 flags 000001b0 restrict: addr c8a00100 mask ffffff00 mflags 00000000 flags 000001b0 restrict: addr c8a00780 mask ffffff80 mflags 00000000 flags 00000190 restrict: addr c8ba7dc8 mask ffffffff mflags 00000000 flags 000001b0 restrict: addr c8a00001 mask ffffffc0 mflags 00000000 flags 000001b0 restrict: addr c8bd2801 mask ffffffc0 mflags 00000000 flags 000001b0 restrict: addr c8c0e801 mask ffffffc0 mflags 00000000 flags 000001b0 restrict: addr c814ba5e mask ffffffff mflags 00000000 flags 000001b0 restrict: addr c814ba4b mask ffffffff mflags 00000000 flags 000001b0 restrict: addr c8a007a5 mask ffffffff mflags 00000000 flags 000001b0 restrict: addr c8137778 mask ffffffff mflags 00000000 flags 000001b0 restrict: addr 8f6bff0f mask ffffffff mflags 00000000 flags 000001b0 restrict: addr c02bf412 mask ffffffff mflags 00000000 flags 000001b0 restrict: addr c00529d1 mask ffffffff mflags 00000000 flags 000001b0 restrict: addr c814ba4b mask ffffffff mflags 00000000 flags 000001b0 addto_syslog: leap epoch 3439756800 expire 3455136000 TAI offset 34 from /etc/ntp.leap addto_syslog: set_peerdstadr(127.127.6.0): change interface from <null> to 127.0.0.1 key_expire: at 0 associd 28259 peer_clear: at 0 next 1 associd 28259 refid INIT audio_config_read: reading </etc/ntp.audio0> idev </dev/audio0.0> cdev </dev/mixer0> agc <line> 12 monitor <vol> 0 audio_init: </dev/audio0.0> bufsiz 320 audio_init: orig: play_size 128, rec_size 128 audio_init: want: play_size 320, rec_size 320 audio_init: set: play_size 128, rec_size 128 audio_init: play_rate 8000, rec_rate 8000, play_format 0x1, rec_format 0x1 audio_show: ctl_fd 6 event at 0 IRIG_AUDIO(0) 8011 81 peer event: mobilize assoc 28259 newpeer: 127.0.0.1->127.127.6.0 mode 3 vers 4 poll 4 4 flags 0xa9 0x1 ttl 0 key 00000000 addto_syslog: set_peerdstadr(127.127.22.0): change interface from <null> to 127.0.0.1 ################## TUTORIAL ################## 1) Download to /etc the NIST leapseconds file leap-seconds.3427142400 (or the latest) from ftp://time.nist.gov/pub/ by passive ftp. Then make a symlink from the generic name ntp.leap to the file: | # cd /etc/ | # wget --passive-ftp ftp://time.nist.gov/pub/leap-seconds.3427142400 | # ln -s leap-seconds.3427142400 ntp.leap 2) Add to /etc/ntp.conf this line: | leapfile /etc/ntp.leap 3) Restart the NTP daemon. After it is synced, you can verify all worked well using the ntpq readvar command, by checking the current TAI offset, looking at the date of the (future) leap event, and at the validity limit of the leapfile: | $ ntpq -c "rv 0 leap,tai,leapsec,expire" | associd=0 status=0259 leap_none, sync_lf_radio, 5 events, leap_armed, | leap=00, tai=33, leapsec=200901010000, expire=200906280000 ###################################### _______________________________________________ questions mailing list questions@lists.ntp.org https://lists.ntp.org/mailman/listinfo/questions