Re: [R] Rstudio crashed when I try to train a nnet model.
On 22/03/2021 8:39 a.m., Jiefei Wang wrote:
Hi Baki,
The crash is very likely due to the bug in nnet. If this is the case, there
is almost nothing you can do. I think you only need to wait for the
response from the package maintainer. You can send your data to the
maintainer and help them to debug the issue.
"Almost nothing"? Helping to debug the problem would almost certainly
be a welcome contribution. If you can reproduce it while running under
a debugger that would locate the issue, and then Prof Ripley would
probably be able to fix it easily.
How to do that? It's a bit easier on other systems than on Windows, but
it's not very hard in either place. The steps are:
Figure out which debugger works on your system. On macOS, it's lldb;
I think other systems use gdb (but check the Admin manual, as I could be
wrong). macOS also needs a special build of R to allow debugging; see
the "R for Mac OS X FAQ" question 10.17 for details on how to get it.
Make sure nnet is built with debugging info. This is automatic on
non-Windows systems. On Windows, reinstall it from source using R command
install.packages("nnet", type = "source", INSTALL_opts = "--debug")
Run R under the debugger. On Unix-alikes you start it using
R -d lldb
or
R -d gdb
depending on which debugger you're using. On Windows, I think it's
usually easiest to start R normally, then start the debugger separately
and attach it to the R process; if you can't figure out how to do that,
ask and someone will tell you the details, which I forget.
If R is not running, type "run" in the debugger to start it, and go
through the process to trigger the crash. The debugger will print very
useful information at that point, which will likely suggest exactly what
went wrong. Post that here, or send it to Prof Ripley.
Duncan Murdoch
Best,
Jiefei
On Mon, Mar 22, 2021 at 8:20 PM Baki UNAL wrote:
Hi,
I tried to run the code in another computer in RGui. This time program run
until final iteration. But after the last iteration RGui quit without any
error code. I mailed this issue to Brian Ripley who is the maintainer of
R nnet package. What can I do to solve this problem?
Best regards
Baki
On Monday, March 22, 2021, 06:55:00 AM GMT+3, Jiefei Wang <
szwj...@gmail.com> wrote:
Hi Baki,
This should be a different issue. It looks like there is no problem in the
R terminal. Does the crash happen every time when you run the code in
RStudio? If so, this should be a bug in RStudio and you need to consult
RStudio's mailing list as R and RStudio are maintained by different teams.
Best,
Jiefei
On Mon, Mar 22, 2021 at 12:57 AM Baki UNAL wrote:
Hi Jiefei
I run the code below in RGui
nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000,
maxit=2000)
But I got the following output:
# weights: 435
initial value 55650.887782
final value 55650.887782
converged
Program early converged. Program didn't any calculations.
Best,
Baki
On Sunday, March 21, 2021, 07:35:31 PM GMT+3, Jiefei Wang <
szwj...@gmail.com> wrote:
Hi Baki,
Perhaps out of memory? Would you be able to run your code through the R
terminal? It probably can give us more information to debug the issue.
Best,
Jiefei
On Mon, Mar 22, 2021 at 12:23 AM Baki UNAL via R-help <
r-help@r-project.org> wrote:
Hi,
I tried to train a neural network with following code:
nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000,
maxit=2000)
When I executed the code R studio crashed with following error:
"R Session Aborted
R encountered a fatal error.
The session was terminated.
Start new session"
When I set the hidden layer as c(15) as below the code works fine.
nn2 <- nnet(TQ~.,data = train, size=c(15), linout=T, MaxNWts =4000,
maxit=2000)
What could be the problem?
Best regards.
[[alternative HTML version deleted]]
__
R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide
http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
[[alternative HTML version deleted]]
__
R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
__
R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
Re: [R] Rstudio crashed when I try to train a nnet model.
Hi Baki, The crash is very likely due to the bug in nnet. If this is the case, there is almost nothing you can do. I think you only need to wait for the response from the package maintainer. You can send your data to the maintainer and help them to debug the issue. Best, Jiefei On Mon, Mar 22, 2021 at 8:20 PM Baki UNAL wrote: > Hi, > > I tried to run the code in another computer in RGui. This time program run > until final iteration. But after the last iteration RGui quit without any > error code. I mailed this issue to Brian Ripley who is the maintainer of > R nnet package. What can I do to solve this problem? > > Best regards > Baki > > On Monday, March 22, 2021, 06:55:00 AM GMT+3, Jiefei Wang < > szwj...@gmail.com> wrote: > > > Hi Baki, > > This should be a different issue. It looks like there is no problem in the > R terminal. Does the crash happen every time when you run the code in > RStudio? If so, this should be a bug in RStudio and you need to consult > RStudio's mailing list as R and RStudio are maintained by different teams. > > Best, > Jiefei > > On Mon, Mar 22, 2021 at 12:57 AM Baki UNAL wrote: > > Hi Jiefei > > I run the code below in RGui > > > nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, > maxit=2000) > > But I got the following output: > > # weights: 435 > initial value 55650.887782 > final value 55650.887782 > converged > > Program early converged. Program didn't any calculations. > > Best, > Baki > > On Sunday, March 21, 2021, 07:35:31 PM GMT+3, Jiefei Wang < > szwj...@gmail.com> wrote: > > > Hi Baki, > > Perhaps out of memory? Would you be able to run your code through the R > terminal? It probably can give us more information to debug the issue. > > Best, > Jiefei > > On Mon, Mar 22, 2021 at 12:23 AM Baki UNAL via R-help < > r-help@r-project.org> wrote: > > Hi, > I tried to train a neural network with following code: > nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, > maxit=2000) > > When I executed the code R studio crashed with following error: > "R Session Aborted > R encountered a fatal error. > The session was terminated. > Start new session" > When I set the hidden layer as c(15) as below the code works fine. > nn2 <- nnet(TQ~.,data = train, size=c(15), linout=T, MaxNWts =4000, > maxit=2000) > > What could be the problem? > > Best regards. > > > [[alternative HTML version deleted]] > > __ > R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > > [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Rstudio crashed when I try to train a nnet model.
Hi, I tried to run the code in another computer in RGui. This time program run until final iteration. But after the last iteration RGui quit without any error code. I mailed this issue to Brian Ripley who is the maintainer of R nnet package. What can I do to solve this problem? Best regardsBaki On Monday, March 22, 2021, 06:55:00 AM GMT+3, Jiefei Wang wrote: Hi Baki, This should be a different issue. It looks like there is no problem in the R terminal. Does the crash happen every time when you run the code in RStudio? If so, this should be a bug in RStudio and you need to consult RStudio's mailing list as R and RStudio are maintained by different teams. Best,Jiefei On Mon, Mar 22, 2021 at 12:57 AM Baki UNAL wrote: Hi Jiefei I run the code below in RGui > nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, > maxit=2000) But I got the following output: # weights: 435initial value 55650.887782 final value 55650.887782 converged Program early converged. Program didn't any calculations. Best,Baki On Sunday, March 21, 2021, 07:35:31 PM GMT+3, Jiefei Wang wrote: Hi Baki, Perhaps out of memory? Would you be able to run your code through the R terminal? It probably can give us more information to debug the issue. Best,Jiefei On Mon, Mar 22, 2021 at 12:23 AM Baki UNAL via R-help wrote: Hi, I tried to train a neural network with following code: nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, maxit=2000) When I executed the code R studio crashed with following error: "R Session Aborted R encountered a fatal error. The session was terminated. Start new session" When I set the hidden layer as c(15) as below the code works fine. nn2 <- nnet(TQ~.,data = train, size=c(15), linout=T, MaxNWts =4000, maxit=2000) What could be the problem? Best regards. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Rstudio crashed when I try to train a nnet model.
Hi Baki, This should be a different issue. It looks like there is no problem in the R terminal. Does the crash happen every time when you run the code in RStudio? If so, this should be a bug in RStudio and you need to consult RStudio's mailing list as R and RStudio are maintained by different teams. Best, Jiefei On Mon, Mar 22, 2021 at 12:57 AM Baki UNAL wrote: > Hi Jiefei > > I run the code below in RGui > > > nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, > maxit=2000) > > But I got the following output: > > # weights: 435 > initial value 55650.887782 > final value 55650.887782 > converged > > Program early converged. Program didn't any calculations. > > Best, > Baki > > On Sunday, March 21, 2021, 07:35:31 PM GMT+3, Jiefei Wang < > szwj...@gmail.com> wrote: > > > Hi Baki, > > Perhaps out of memory? Would you be able to run your code through the R > terminal? It probably can give us more information to debug the issue. > > Best, > Jiefei > > On Mon, Mar 22, 2021 at 12:23 AM Baki UNAL via R-help < > r-help@r-project.org> wrote: > > Hi, > I tried to train a neural network with following code: > nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, > maxit=2000) > > When I executed the code R studio crashed with following error: > "R Session Aborted > R encountered a fatal error. > The session was terminated. > Start new session" > When I set the hidden layer as c(15) as below the code works fine. > nn2 <- nnet(TQ~.,data = train, size=c(15), linout=T, MaxNWts =4000, > maxit=2000) > > What could be the problem? > > Best regards. > > > [[alternative HTML version deleted]] > > __ > R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > > [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Rstudio crashed when I try to train a nnet model.
Hi Jiefei I run the code below in RGui > nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, > maxit=2000) But I got the following output: # weights: 435initial value 55650.887782 final value 55650.887782 converged Program early converged. Program didn't any calculations. Best,Baki On Sunday, March 21, 2021, 07:35:31 PM GMT+3, Jiefei Wang wrote: Hi Baki, Perhaps out of memory? Would you be able to run your code through the R terminal? It probably can give us more information to debug the issue. Best,Jiefei On Mon, Mar 22, 2021 at 12:23 AM Baki UNAL via R-help wrote: Hi, I tried to train a neural network with following code: nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, maxit=2000) When I executed the code R studio crashed with following error: "R Session Aborted R encountered a fatal error. The session was terminated. Start new session" When I set the hidden layer as c(15) as below the code works fine. nn2 <- nnet(TQ~.,data = train, size=c(15), linout=T, MaxNWts =4000, maxit=2000) What could be the problem? Best regards. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Rstudio crashed when I try to train a nnet model.
Hi Baki, Perhaps out of memory? Would you be able to run your code through the R terminal? It probably can give us more information to debug the issue. Best, Jiefei On Mon, Mar 22, 2021 at 12:23 AM Baki UNAL via R-help wrote: > Hi, > I tried to train a neural network with following code: > nn2 <- nnet(TQ~.,data = train, size=c(15,15), linout=T, MaxNWts =4000, > maxit=2000) > > When I executed the code R studio crashed with following error: > "R Session Aborted > R encountered a fatal error. > The session was terminated. > Start new session" > When I set the hidden layer as c(15) as below the code works fine. > nn2 <- nnet(TQ~.,data = train, size=c(15), linout=T, MaxNWts =4000, > maxit=2000) > > What could be the problem? > > Best regards. > > > [[alternative HTML version deleted]] > > __ > R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > [[alternative HTML version deleted]] __ R-help@r-project.org mailing list -- To UNSUBSCRIBE and more, see https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
