RE: (RADIATOR) AuthBy OPIE - can't locate loadable object
Hi Again Many thanks to Hugh for helping me out. A proper installation of the Perl OPIE module was exactly the issue. I was trying to enable s/key (now OPIE) authentication for Radius users in a Check Point VPN-1 environemnt, since native s/key will not be a feature of the next Check Point version. I can provide the document I wrote for anyone who needs to setup a similar environment Regards, Mark -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Hugh Irvine Sent: Thursday, February 27, 2003 10:46 PM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - See my other mail for instructions on installing Perl modules. regards Hugh On Thursday, Feb 27, 2003, at 19:42 Australia/Melbourne, Mark Wellins wrote: Again thanks Hugh. I am not sure how you install the files included in that tarball. Currently I just copied OPIE.pm and OPIE.xs to /usr/lib/perl5/site_perl/5.6.1/ which is probably not correct Thanks for your advice, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 10:18 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the files. It actually looks like you have not installed the Perl OPIE module as described in section 6.44 of the Radiator reference manual (included in the distribution in the file doc/ref.html). regards Hugh On Thursday, Feb 27, 2003, at 18:34 Australia/Melbourne, Mark Wellins wrote: Thanks Hugh. I hope it's as simple as that! Attached if the radius.cfg and logfile (after I changed the debug variable to 4) (I left the file whole since it's a lab environment, you'll see the secret still) Regards, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 12:33 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the debug output. It looks to me more like a typo in the configuration file, which should look like this: AuthBy OPIE /AuthBy If you still have a problem, please send me a copy of the configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening at startup. regards Hugh On Wednesday, Feb 26, 2003, at 20:01 Australia/Melbourne, Mark Wellins wrote: Hello, I am having trouble starting Radiator (3.5 Eval) with OPIE authentication enabled. The logflie reports as follows: Wed Feb 26 07:19:06 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:19:06 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) Wed Feb 26 07:32:41 2003: NOTICE: SIGTERM received: stopping Wed Feb 26 07:32:42 2003: ERR: Could not load AuthBy module Radius::AuthOPIE: Can't locate loadable object for module OPIE in @INC (@INC contains: . /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux /usr/lib/perl5/site_perl/5.6.1 /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1 /usr/lib/perl5/vendor_perl .) at Radius/AuthOPIE.pm line 15 Compilation failed in require at Radius/AuthOPIE.pm line 15, FILE line 34. BEGIN failed--compilation aborted at Radius/AuthOPIE.pm line 15, FILE line 34. Compilation failed in require at (eval 23) line 3, FILE line 34. Wed Feb 26 07:32:42 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:32:42 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) I am guessing that the @INC variable does not contain the necessary information to find the loadable module for OPIE. Since I am pretty new to Linux I really don't know where to start debugging - looking through the archive it looks like I need to recompile PERL with OPIE somehow. Any guidance would help - many thanks. Mark === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. logflieradius.cfg NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere
Re: (RADIATOR) AuthBy OPIE - can't locate loadable object
Hello Mark - If you send us the document we will be happy to include it in the goodies. regards Hugh On Tuesday, Mar 4, 2003, at 20:15 Australia/Melbourne, Mark Wellins wrote: Hi Again Many thanks to Hugh for helping me out. A proper installation of the Perl OPIE module was exactly the issue. I was trying to enable s/key (now OPIE) authentication for Radius users in a Check Point VPN-1 environemnt, since native s/key will not be a feature of the next Check Point version. I can provide the document I wrote for anyone who needs to setup a similar environment Regards, Mark -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Hugh Irvine Sent: Thursday, February 27, 2003 10:46 PM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - See my other mail for instructions on installing Perl modules. regards Hugh On Thursday, Feb 27, 2003, at 19:42 Australia/Melbourne, Mark Wellins wrote: Again thanks Hugh. I am not sure how you install the files included in that tarball. Currently I just copied OPIE.pm and OPIE.xs to /usr/lib/perl5/site_perl/5.6.1/ which is probably not correct Thanks for your advice, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 10:18 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the files. It actually looks like you have not installed the Perl OPIE module as described in section 6.44 of the Radiator reference manual (included in the distribution in the file doc/ref.html). regards Hugh On Thursday, Feb 27, 2003, at 18:34 Australia/Melbourne, Mark Wellins wrote: Thanks Hugh. I hope it's as simple as that! Attached if the radius.cfg and logfile (after I changed the debug variable to 4) (I left the file whole since it's a lab environment, you'll see the secret still) Regards, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 12:33 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the debug output. It looks to me more like a typo in the configuration file, which should look like this: AuthBy OPIE /AuthBy If you still have a problem, please send me a copy of the configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening at startup. regards Hugh On Wednesday, Feb 26, 2003, at 20:01 Australia/Melbourne, Mark Wellins wrote: Hello, I am having trouble starting Radiator (3.5 Eval) with OPIE authentication enabled. The logflie reports as follows: Wed Feb 26 07:19:06 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:19:06 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) Wed Feb 26 07:32:41 2003: NOTICE: SIGTERM received: stopping Wed Feb 26 07:32:42 2003: ERR: Could not load AuthBy module Radius::AuthOPIE: Can't locate loadable object for module OPIE in @INC (@INC contains: . /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux /usr/lib/perl5/site_perl/5.6.1 /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1 /usr/lib/perl5/vendor_perl .) at Radius/AuthOPIE.pm line 15 Compilation failed in require at Radius/AuthOPIE.pm line 15, FILE line 34. BEGIN failed--compilation aborted at Radius/AuthOPIE.pm line 15, FILE line 34. Compilation failed in require at (eval 23) line 3, FILE line 34. Wed Feb 26 07:32:42 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:32:42 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) I am guessing that the @INC variable does not contain the necessary information to find the loadable module for OPIE. Since I am pretty new to Linux I really don't know where to start debugging - looking through the archive it looks like I need to recompile PERL with OPIE somehow. Any guidance would help - many thanks. Mark === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. logflieradius.cfg NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable
Re: (RADIATOR) AuthBy OPIE - can't locate loadable object
Hello Mark - Thanks for sending the files. It actually looks like you have not installed the Perl OPIE module as described in section 6.44 of the Radiator reference manual (included in the distribution in the file doc/ref.html). regards Hugh On Thursday, Feb 27, 2003, at 18:34 Australia/Melbourne, Mark Wellins wrote: Thanks Hugh. I hope it's as simple as that! Attached if the radius.cfg and logfile (after I changed the debug variable to 4) (I left the file whole since it's a lab environment, you'll see the secret still) Regards, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 12:33 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the debug output. It looks to me more like a typo in the configuration file, which should look like this: AuthBy OPIE /AuthBy If you still have a problem, please send me a copy of the configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening at startup. regards Hugh On Wednesday, Feb 26, 2003, at 20:01 Australia/Melbourne, Mark Wellins wrote: Hello, I am having trouble starting Radiator (3.5 Eval) with OPIE authentication enabled. The logflie reports as follows: Wed Feb 26 07:19:06 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:19:06 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) Wed Feb 26 07:32:41 2003: NOTICE: SIGTERM received: stopping Wed Feb 26 07:32:42 2003: ERR: Could not load AuthBy module Radius::AuthOPIE: Can't locate loadable object for module OPIE in @INC (@INC contains: . /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux /usr/lib/perl5/site_perl/5.6.1 /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1 /usr/lib/perl5/vendor_perl .) at Radius/AuthOPIE.pm line 15 Compilation failed in require at Radius/AuthOPIE.pm line 15, FILE line 34. BEGIN failed--compilation aborted at Radius/AuthOPIE.pm line 15, FILE line 34. Compilation failed in require at (eval 23) line 3, FILE line 34. Wed Feb 26 07:32:42 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:32:42 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) I am guessing that the @INC variable does not contain the necessary information to find the loadable module for OPIE. Since I am pretty new to Linux I really don't know where to start debugging - looking through the archive it looks like I need to recompile PERL with OPIE somehow. Any guidance would help - many thanks. Mark === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. logflieradius.cfg NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
RE: (RADIATOR) AuthBy OPIE - can't locate loadable object
Again thanks Hugh. I am not sure how you install the files included in that tarball. Currently I just copied OPIE.pm and OPIE.xs to /usr/lib/perl5/site_perl/5.6.1/ which is probably not correct Thanks for your advice, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 10:18 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the files. It actually looks like you have not installed the Perl OPIE module as described in section 6.44 of the Radiator reference manual (included in the distribution in the file doc/ref.html). regards Hugh On Thursday, Feb 27, 2003, at 18:34 Australia/Melbourne, Mark Wellins wrote: Thanks Hugh. I hope it's as simple as that! Attached if the radius.cfg and logfile (after I changed the debug variable to 4) (I left the file whole since it's a lab environment, you'll see the secret still) Regards, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 12:33 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the debug output. It looks to me more like a typo in the configuration file, which should look like this: AuthBy OPIE /AuthBy If you still have a problem, please send me a copy of the configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening at startup. regards Hugh On Wednesday, Feb 26, 2003, at 20:01 Australia/Melbourne, Mark Wellins wrote: Hello, I am having trouble starting Radiator (3.5 Eval) with OPIE authentication enabled. The logflie reports as follows: Wed Feb 26 07:19:06 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:19:06 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) Wed Feb 26 07:32:41 2003: NOTICE: SIGTERM received: stopping Wed Feb 26 07:32:42 2003: ERR: Could not load AuthBy module Radius::AuthOPIE: Can't locate loadable object for module OPIE in @INC (@INC contains: . /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux /usr/lib/perl5/site_perl/5.6.1 /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1 /usr/lib/perl5/vendor_perl .) at Radius/AuthOPIE.pm line 15 Compilation failed in require at Radius/AuthOPIE.pm line 15, FILE line 34. BEGIN failed--compilation aborted at Radius/AuthOPIE.pm line 15, FILE line 34. Compilation failed in require at (eval 23) line 3, FILE line 34. Wed Feb 26 07:32:42 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:32:42 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) I am guessing that the @INC variable does not contain the necessary information to find the loadable module for OPIE. Since I am pretty new to Linux I really don't know where to start debugging - looking through the archive it looks like I need to recompile PERL with OPIE somehow. Any guidance would help - many thanks. Mark === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. logflieradius.cfg NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
Re: (RADIATOR) AuthBy OPIE - can't locate loadable object
Hello Mark - See my other mail for instructions on installing Perl modules. regards Hugh On Thursday, Feb 27, 2003, at 19:42 Australia/Melbourne, Mark Wellins wrote: Again thanks Hugh. I am not sure how you install the files included in that tarball. Currently I just copied OPIE.pm and OPIE.xs to /usr/lib/perl5/site_perl/5.6.1/ which is probably not correct Thanks for your advice, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 10:18 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the files. It actually looks like you have not installed the Perl OPIE module as described in section 6.44 of the Radiator reference manual (included in the distribution in the file doc/ref.html). regards Hugh On Thursday, Feb 27, 2003, at 18:34 Australia/Melbourne, Mark Wellins wrote: Thanks Hugh. I hope it's as simple as that! Attached if the radius.cfg and logfile (after I changed the debug variable to 4) (I left the file whole since it's a lab environment, you'll see the secret still) Regards, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 12:33 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the debug output. It looks to me more like a typo in the configuration file, which should look like this: AuthBy OPIE /AuthBy If you still have a problem, please send me a copy of the configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening at startup. regards Hugh On Wednesday, Feb 26, 2003, at 20:01 Australia/Melbourne, Mark Wellins wrote: Hello, I am having trouble starting Radiator (3.5 Eval) with OPIE authentication enabled. The logflie reports as follows: Wed Feb 26 07:19:06 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:19:06 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) Wed Feb 26 07:32:41 2003: NOTICE: SIGTERM received: stopping Wed Feb 26 07:32:42 2003: ERR: Could not load AuthBy module Radius::AuthOPIE: Can't locate loadable object for module OPIE in @INC (@INC contains: . /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux /usr/lib/perl5/site_perl/5.6.1 /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1 /usr/lib/perl5/vendor_perl .) at Radius/AuthOPIE.pm line 15 Compilation failed in require at Radius/AuthOPIE.pm line 15, FILE line 34. BEGIN failed--compilation aborted at Radius/AuthOPIE.pm line 15, FILE line 34. Compilation failed in require at (eval 23) line 3, FILE line 34. Wed Feb 26 07:32:42 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:32:42 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) I am guessing that the @INC variable does not contain the necessary information to find the loadable module for OPIE. Since I am pretty new to Linux I really don't know where to start debugging - looking through the archive it looks like I need to recompile PERL with OPIE somehow. Any guidance would help - many thanks. Mark === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. logflieradius.cfg NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body
Re: (RADIATOR) AuthBy OPIE - can't locate loadable object
Hello Mark - Thanks for sending the debug output. It looks to me more like a typo in the configuration file, which should look like this: AuthBy OPIE /AuthBy If you still have a problem, please send me a copy of the configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening at startup. regards Hugh On Wednesday, Feb 26, 2003, at 20:01 Australia/Melbourne, Mark Wellins wrote: Hello, I am having trouble starting Radiator (3.5 Eval) with OPIE authentication enabled. The logflie reports as follows: Wed Feb 26 07:19:06 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:19:06 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) Wed Feb 26 07:32:41 2003: NOTICE: SIGTERM received: stopping Wed Feb 26 07:32:42 2003: ERR: Could not load AuthBy module Radius::AuthOPIE: Can't locate loadable object for module OPIE in @INC (@INC contains: . /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux /usr/lib/perl5/site_perl/5.6.1 /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1 /usr/lib/perl5/vendor_perl .) at Radius/AuthOPIE.pm line 15 Compilation failed in require at Radius/AuthOPIE.pm line 15, FILE line 34. BEGIN failed--compilation aborted at Radius/AuthOPIE.pm line 15, FILE line 34. Compilation failed in require at (eval 23) line 3, FILE line 34. Wed Feb 26 07:32:42 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:32:42 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) I am guessing that the @INC variable does not contain the necessary information to find the loadable module for OPIE. Since I am pretty new to Linux I really don't know where to start debugging - looking through the archive it looks like I need to recompile PERL with OPIE somehow. Any guidance would help - many thanks. Mark === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
RE: (RADIATOR) AuthBy OPIE - can't locate loadable object
Thanks Hugh. I hope it's as simple as that! Attached if the radius.cfg and logfile (after I changed the debug variable to 4) (I left the file whole since it's a lab environment, you'll see the secret still) Regards, Mark -Original Message- From: Hugh Irvine [mailto:[EMAIL PROTECTED] Sent: Thursday, February 27, 2003 12:33 AM To: Mark Wellins Cc: [EMAIL PROTECTED] Subject: Re: (RADIATOR) AuthBy OPIE - can't locate loadable object Hello Mark - Thanks for sending the debug output. It looks to me more like a typo in the configuration file, which should look like this: AuthBy OPIE /AuthBy If you still have a problem, please send me a copy of the configuration file (no secrets) together with a trace 4 debug from Radiator showing what is happening at startup. regards Hugh On Wednesday, Feb 26, 2003, at 20:01 Australia/Melbourne, Mark Wellins wrote: Hello, I am having trouble starting Radiator (3.5 Eval) with OPIE authentication enabled. The logflie reports as follows: Wed Feb 26 07:19:06 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:19:06 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) Wed Feb 26 07:32:41 2003: NOTICE: SIGTERM received: stopping Wed Feb 26 07:32:42 2003: ERR: Could not load AuthBy module Radius::AuthOPIE: Can't locate loadable object for module OPIE in @INC (@INC contains: . /usr/lib/perl5/5.6.1/i386-linux /usr/lib/perl5/5.6.1 /usr/lib/perl5/site_perl/5.6.1/i386-linux /usr/lib/perl5/site_perl/5.6.1 /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.6.1/i386-linux /usr/lib/perl5/vendor_perl/5.6.1 /usr/lib/perl5/vendor_perl .) at Radius/AuthOPIE.pm line 15 Compilation failed in require at Radius/AuthOPIE.pm line 15, FILE line 34. BEGIN failed--compilation aborted at Radius/AuthOPIE.pm line 15, FILE line 34. Compilation failed in require at (eval 23) line 3, FILE line 34. Wed Feb 26 07:32:42 2003: ERR: Unknown object 'AuthBy' in /etc/radiator/radius.cfg line 34 Wed Feb 26 07:32:42 2003: INFO: Server started: Radiator 3.5 on claw (DEMO) I am guessing that the @INC variable does not contain the necessary information to find the loadable module for OPIE. Since I am pretty new to Linux I really don't know where to start debugging - looking through the archive it looks like I need to recompile PERL with OPIE somehow. Any guidance would help - many thanks. Mark === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message. NB: have you included a copy of your configuration file (no secrets), together with a trace 4 debug showing what is happening? -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. logflie Description: Binary data radius.cfg Description: Binary data
