Here is my conf:
# radius.cfg
#
# You should consider this file to be a starting point only
# $Id: linux-radius.cfg,v 1.2 2001/08/30 03:41:02 mikem Exp $
#Foreground
#LogStdout
LogDir /var/log/radius
DbDir /etc/radiator
DictionaryFile %D/dictionary
# Use a low trace level in production systems. Increase
# it to 4 or 5 for debugging, or use the -trace flag to radiusd
Trace 3
#Lower case
RewriteUsername tr/A-Z/a-z/
#Remove Spaces
RewriteUsername s/\s+//g
ClientListSQL
#this is part of the MS SQL database
DBSource DBI:Sybase:database=databasename;server=server
DBUsername username
DBAuth x
GetClientQuery select
NASIDENTIFIER,SECRET,IGNOREACCTSIGNATURE,DUPINTERVAL,DEFAULTREALM,NASTYP
E,SNMPCOMMUNITY,LIVINGSTONOFFS,LIVINGSTONHOLE,FRAMEDGROUPBASEADDRESS,FRA
MEDGROUPMAXPORTSPERCLASSC,REWRITEUSERNAME,NOIGNOREDUPLICATES,PREHANDLERH
OOK from NASClients
/ClientListSQL
SessionDatabase SQL
DBSource dbi:mysql:radius:xxx.xxx.xxx.xxx
DBUsername radiusd
DBAuth ch2900
/SessionDatabase
Handler Realm=go-concepts.com,Request-Type=Access-Request
RewriteUsername s/^([^@]+).*/$1/
AuthBy SQL
Identifier GOCsql
DefaultReply
Ascend-Shared-Profile-Enable=0,User-Service=Framed-User,Framed-Protocol=
PPP,Framed-Routing=None,Ascend-Base-Channel-Count=1,Ascend-Minimum-Chann
els=1,Ascend-Maximum-Channels=1,Ascend-Assign-IP-Pool=1,Ascend-Multicast
-Client=Multicast-Yes
DBSource DBI:Sybase:database=datbasename;server=server
DBUsername username
DBAuth x
AuthSelect AuthSelect %n
AuthColumnDef 0, User-Password, check
AuthColumnDef 1, Framed-Address, reply
AuthColumnDef 2, Framed-Protocol, reply
AuthColumnDef 3, Ascend-Maximum-Channels, reply
AuthColumnDef 4, Ascend-IP-Direct, reply
AuthColumnDef 5, Ascend-Assign-IP-Pool, reply
AuthColumnDef 6, GENERAL, reply
AddToReplyIfNotExist
User-Service=Framed-User,Framed-Protocol=PPP,Framed-Routing=None,Ascend-
Base-Channel-Count=1,Ascend-Minimum-Channels=1,Ascend-Maximum-Channels=1
,Ascend-Assign-IP-Pool=1,Ascend-Multicast-Client=Multicast-Yes
/AuthBy SQL
/Handler
Handler Request-Type=Accounting-Request
AuthBy SQL
Identifier MySQL
DBSource dbi:mysql:radius:xxx.xxx.xxx.xxx
DBUsername username
DBAuth x
AuthSelect
AcctColumnDef USERNAME,%n,formatted
AcctColumnDef TIME_STAMP,Timestamp,integer
AcctColumnDef ACCTSTATUSTYPE,Acct-Status-Type
AcctColumnDef ACCTDELAYTIME,Acct-Delay-Time,integer
AcctColumnDef
ACCTINPUTOCTETS,Acct-Input-Octets,integer
AcctColumnDef
ACCTOUTPUTOCTETS,Acct-Output-Octets,integer
AcctColumnDef ACCTSESSIONID,Acct-Session-Id
AcctColumnDef
ACCTSESSIONTIME,Acct-Session-Time,integer
AcctColumnDef ACCTTERMINATECAUSE,Acct-Terminate-Cause
AcctColumnDef NASIDENTIFIER,NAS-Identifier
AcctColumnDef NASPORT,NAS-Port,integer
/AuthBy SQL
/Handler
We do several rewrites to the username, that is why we us %n for the
username field, that way you see the formatted username after all the
rewrites occur. The Accounting Request are all logged into the mysql
server. You can define what you want logged into what columns using the
AcctColumnDef command. We are not yet using this in a production
server but we have tested it may time and it works great. If you have
any questions feel free to ask.
Thanks,
Tony B, CCNA, Network+
Systems Administration
GO Concepts, Inc. / www.go-concepts.com
Are you on the GO yet?
What about those you know, are they on the GO?
513.934.2800
1.888.ON.GO.YET
-Original Message-
From: Shane Malden [mailto:[EMAIL PROTECTED]]
Sent: Sunday, March 10, 2002 11:51 PM
To: tonyb
Subject: Re: (RADIATOR) Logging to MSSQL 7.0
Tony,
I would be interested on more information on how to do
accounting
with SQL. We use Radiator 2.19 and authenticate with SecurID. We don't
have
any direct control over our NAS as they are supported by out
Telecommunications provider. I would be very interested in finding out
how
to see what data and time users are connecting for. If your able to
help, it
would be appreciated.
Regards,
Shane
- Original Message -
From: tonyb [EMAIL PROTECTED]
To: Dan Melomedman [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Monday, March 11, 2002 2:38 PM
Subject: RE: (RADIATOR) Logging to MSSQL 7.0
We are an ISP that just recently evaluated and purchased radiator.
And
I agree that it is a great radius program...anyway back to sql
We use
