Re: [SlimDevices: Radio] Radio Knobs - 3D printed
staresy wrote: > Not a phrase you'd expect to read on these forums :) with a chaser? :) Redrum's Profile: http://forums.slimdevices.com/member.php?userid=33806 View this thread: http://forums.slimdevices.com/showthread.php?t=116864 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Radio Knobs - 3D printed
Redrum wrote: > I''ll look for the right alcohol and give that a shot. > Not a phrase you'd expect to read on these forums :) location 1: lms 8.3 on win 10 brix server, x3 sb radios, x1 touch, x1 controller : location 2: lms 8.3 on win 10 brix server, x2 sb radios, x1 duet receiver, x1 controller : alexa mediaserver smart skill, material android, squeezelitex control staresy's Profile: http://forums.slimdevices.com/member.php?userid=807 View this thread: http://forums.slimdevices.com/showthread.php?t=116864 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Radio Knobs - 3D printed
Thanks Starsey, I'll look for the right alcohol and give that a shot. Thanks Philippe, so it sounds like you are not really removing the sticky "rubber" coating, you are just applying a new "rubber" coating that isn't sticky? If so, great idea... Jim Redrum's Profile: http://forums.slimdevices.com/member.php?userid=33806 View this thread: http://forums.slimdevices.com/showthread.php?t=116864 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Radio Knobs - 3D printed
Redrum wrote: > denatured/isopropyl alcohol has been mentioned several times, but I > have never had allot of luck with it. That is, maybe it works > eventually, but it took allot of rubbing and reapplication. > > I usually end up sanding them, then repainting with a matte black. Easy > (for knobs), and looks good, but I just bought a sticky (all over) boom, > and would like to clean it up without having to repaint. > > Do you have any tips? I do realize there is another thread on it, but > like I said my experience with the alcohol was not that great. Maybe > it's user error. > > Jim >From memory it was pretty straightforward and didn't require too much effort to remove the old sticky coating, no real trick involved. All I can say is I definitely used Methylated Spirits (the purple stuff) and not Isopropyl Alcohol. I'm not sure if that's the key, I think methylated spirit is methanol based and IPA is ethanol based, but I may be wrong, I'm no chemist, or perhaps the formulation is stronger here in the UK? The purple dye, plus other additives are put in to deter people from drinking it, mmm, lovely. Not recommended. location 1: lms 8.3 on win 10 brix server, x3 sb radios, x1 touch, x1 controller : location 2: lms 8.3 on win 10 brix server, x2 sb radios, x1 duet receiver, x1 controller : alexa mediaserver smart skill, material android, squeezelitex control staresy's Profile: http://forums.slimdevices.com/member.php?userid=807 View this thread: http://forums.slimdevices.com/showthread.php?t=116864 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Radio Knobs - 3D printed
Redrum wrote: > denatured/isopropyl alcohol has been mentioned several times, but I > have never had allot of luck with it. That is, maybe it works > eventually, but it took allot of rubbing and reapplication. > > I usually end up sanding them, then repainting with a matte black. Easy > (for knobs), and looks good, but I just bought a sticky (all over) boom, > and would like to clean it up without having to repaint. > > Do you have any tips? I do realize there is another thread on it, but > like I said my experience with the alcohol was not that great. Maybe > it's user error. > > Jim Clean the front plate with soap and hot water (70C) for 5 mins. Let it dry and then spray plasti-dip transparent rubber coat. Ive made that on many booms (and other sticky devices)? They come back new with no effort. And whats greys with plasti-dip is that if you miss, just peel it off and do it again. LMS 8.2 on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet, 1xTouch, 1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, RivaArena 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=116864 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Radio Knobs - 3D printed
staresy wrote: > I bought a set of them a year back, they are fine. > > Then I realized that the old sticky coating on the original knobs can > easily be removed with methylated spirits (de-matured alcohol for US > listeners), so I cleaned up the originals and re fitted. > > The 3D printed ones are a useful backup though. denatured/isopropyl alcohol has been mentioned several times, but I have never had allot of luck with it. That is, maybe it works eventually, but it took allot of rubbing and reapplication. I usually end up sanding them, then repainting with a matte black. Easy (for knobs), and looks good, but I just bought a sticky (all over) boom, and would like to clean it up without having to repaint. Do you have any tips? I do realize there is another thread on it, but like I said my experience with the alcohol was not that great. Maybe it's user error. Jim Redrum's Profile: http://forums.slimdevices.com/member.php?userid=33806 View this thread: http://forums.slimdevices.com/showthread.php?t=116864 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Radio Knobs - 3D printed
Redrum wrote: > Just strolling around in ebay (US), I came across this (from Germany): > > https://www.ebay.com/itm/155164154203?hash=item242081195b:g:BtkAAOSwNp1bxJ6G=enc%3AAQAHoF45GZA7ezc76h9Ibr9JXKIAMxg9fc%2FCJF%2FxuTNeFELDmBTbpN%2BYWpCKsrdRdRICPw1Friz0zau0wj%2B3Cn5hdcT3T89PBLAkEJ5vOaPJnu6hjf4KVfR40lbYLY7J6bbh13X1VxJwQZB2BL0ucnunq7BLwMsTtbXiGryXDEeWISKC7RAdbBRnGVTLCWYxnx1tIvzi33gaxpl1DonKBep3Nfg%3D%7Ctkp%3ABk9SR6zkrujvYA > > In case anyone is interested. I usually sand mine down and repaint them, > but the flat face is an interesting look, and allot less work > > The listing says one set left, but perhaps there are more > > Jim I bought a set of them a year back, they are fine. Then I realised that the old sticky coating on the original knobs can easily be removed with methylated spirits (de-matured alcohol for US listeners), so I cleaned up the originals and re fitted. The 3D printed ones are a useful backup though. location 1: lms 8.3 on win 10 brix server, x3 sb radios, x1 touch, x1 controller : location 2: lms 8.3 on win 10 brix server, x2 sb radios, x1 duet receiver, x1 controller : alexa mediaserver smart skill, material android, squeezelitex control staresy's Profile: http://forums.slimdevices.com/member.php?userid=807 View this thread: http://forums.slimdevices.com/showthread.php?t=116864 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
