Re: [SlimDevices: Radio] Add 2 External HP to my squeezebox Radio
I don't think thatnthis is possible and does make any sense: the radios are mono, so no stereo amp inside. Adding two speakers in parallel would probably too much for the little amp inside. According to the wiki, it is a two-way speaker, so you would at least need an appropriate speaker for each frequency range. And the radios' sound is highly optimised with a DSP, which should apply volume-dependent changed. So it would be worse if the acoustic properties change. You have to use the stereo headphones output and an external amp if you are not satisfied with the sound. Or use two radios in bridged stereo mode. *Transporter*, *Squeezelite-esp32* (SSD1322+IR+Cirrus CS43198), *DAC32*, 2x *SB Radio*, 2x *SB3*, *Touch*, *PiCorePlayer8* (Audiophonics RASPTOUCH i-Sabre+IR) df77's Profile: http://forums.slimdevices.com/member.php?userid=71347 View this thread: http://forums.slimdevices.com/showthread.php?t=116909 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Add 2 External HP to my squeezebox Radio
Thanks for advice. In another life maybe I'll choose Pi+Amp (even if the price is high than original one). But in fact I was interested to know if it's was possible to use the internal Amp of the squeezeradio to powered these HP. I finally decide to add an Amp class D (50$) plugged to the headphone jack (volume 100%). I'll use another squeezebox parked somewhere in my house (I bought lot of them few years ago) I tested tonight and I was perfect. julicraps's Profile: http://forums.slimdevices.com/member.php?userid=16104 View this thread: http://forums.slimdevices.com/showthread.php?t=116909 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Simplified instructions for Squeezebox Radio Wi-Fi fix (wlanpoke)
rdeckard wrote: > Sadly, new issues have now surfaced with the wired connection. > It will stay up for most of a day, but the last 2 nights, whilst still > pingable and seen by LMS, the radio gets into a sluggish/unresponsive > state, and requires a reboot. > > First thing I noticed when I walked into the room and turned on the > light, the radio display remained dark, when it usually would have gone > bright from the auto-brightness feature. > After about 10-20s, it did get brighter, but from there, every button > press took about 5-10s to actually respond, making the radio unusable, > and only a reboot resolved it. > > Could it just be that I need to factory restore it after all the > troubleshooting/tweaking I've been doing over the past week or so? > If I do that, will I have to deal with reloading the Community firmware > again? > Any other suggestions? Have now disabled wlan in the radio as per https://forums.slimdevices.com/showthread.php?109953-WiFi-connection-unstable-lost-on-three-Radios&p=1053624&viewfull=1#post1053624 We'll see how that goes. Still wondering if I should factory restore or not. rdeckard's Profile: http://forums.slimdevices.com/member.php?userid=40772 View this thread: http://forums.slimdevices.com/showthread.php?t=114775 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio
Re: [SlimDevices: Radio] Simplified instructions for Squeezebox Radio Wi-Fi fix (wlanpoke)
Sadly, new issues have now surfaced with the wired connection. It will stay up for most of a day, but the last 2 nights, whilst still pingable and seen by LMS, the radio gets into a sluggish/unresponsive state, and requires a reboot. First thing I noticed when I walked into the room and turned on the light, the radio display remained dark, when it usually would have gone bright from the auto-brightness feature. After about 10-20s, it did get brighter, but from there, every button press took about 5-10s to actually respond, making the radio unusable, and only a reboot resolved it. Could it just be that I need to factory restore it after all the troubleshooting/tweaking I've been doing over the past week or so? If I do that, will I have to deal with reloading the Community firmware again? Any other suggestions? rdeckard's Profile: http://forums.slimdevices.com/member.php?userid=40772 View this thread: http://forums.slimdevices.com/showthread.php?t=114775 ___ Radio mailing list Radio@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/radio