Re: [rancid] Aruba 2930M
Here, we use h3clogin for HP/Aruba Comware 5 or 7 switches. Our Comware 5 switches are the little Network Jack 5000 series, and Comware 7 are flexible fabric switches we use for iSCSI (5700 and 5300 series). No issues with authentication, there are occasionally some setup errors when Rancid initially connects but they’re not fatal. We always get a configuration stored though. h3clogin -c"display current-configuration" AA.BB.CC.DD James From: Rancid-discuss On Behalf Of henri hemery Sent: Friday, December 20, 2019 5:38 AM To: Guisepp Rodriguez Cc: Rancid-discuss@shrubbery.net Subject: Re: [rancid] Aruba 2930M EXTERNAL E-MAIL: BE CAUTIOUS WHEN OPENING FILES OR FOLLOWING LINKS Hi Guisepp, For me, the problem I still have with tis Aruba/HP switches that run comware 5 I think, it is the authentication. The enable mode ask for username+password again, and it seems that the scripts are not designed for that If someone found the solution, I take it! ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
Re: [rancid] Aruba 2930M
Hi, On Thu, 19 Dec 2019 at 1:02 am, Guisepp Rodriguez wrote: > What version of Rancid I need? I use rancid 3.7 and for Aruba 2930M I use > hlogin, hrancid. This is the output error: > > [rancid@rancid rancid]$ ./bin/hrancid -t hp -d xx.xx.xx.xx > executing hlogin -t 90 -c"show version;show flash;show > system-information;show system information;show module;show stack;show tech > transceivers;show config files;show config status;write term" xx.xx.xx.xx > sh: hlogin: command not found > ^^ do you have a $PATH environment variable problem? It seems hrancid can’t execute hlogin. From memory, this can be set in rancid.conf. Cheers, Dale ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
Re: [rancid] Aruba 2930M
This is my config add autoenable xx.xx.xx.xx 1 add method xx.xx.xx.xx ssh add user * add password * Le ven. 20 déc. 2019, à 10 h 10, henri hemery a écrit : > Cool for you! > > Can you tell me how you configured the authentication on the switch? > Does the rancid user get particular privilege mode? > In you .cloginrc file, is it autoenable? > > On Fri, Dec 20, 2019 at 9:45 AM Guisepp Rodriguez > wrote: > >> I notice that the backup its done! Even if the command hrancid doesn't >> work when I test >> >> ./bin/hrancid -t hp -d xx.xx.xx.xx >> >> * >> [rancid@rancid ~]$ more >> /usr/local/rancid/var/xxx/configs/xx.xx.xx.xx >> ;RANCID-CONTENT-TYPE: hp >> ; >> ;Serial Number: x >> ; >> ;Memory: 331M >> ; >> ;Image: stamp: >> >> /ws/swbuildm/rel_ukiah_qaoff/code/build/lvm(swbuildm_rel_ukiah_qaoff_rel_ukiah) >> ;Image: Jul 21 2017 14:09:42 >> ;Image: WC.16.04.0008 >> ;Image: 423 >> ;Image: Boot Image: Primary >> ;Image: Boot ROM Version:WC.17.02.0003 >> ;Image: Active Boot ROM: Primary >> ;Image: ROM WC.17.02.0003 >> ; >> ;Flash: Image Size (bytes) Date Version >> ;Flash: - -- >> ;Flash: Primary Image:28278126 07/21/17 WC.16.04.0008 >> ;Flash: Secondary Image :28278126 07/21/17 WC.16.04.0008 >> ;Flash: Boot ROM Version >> ;Flash: >> ;Flash: Primary Boot ROM Version : WC.17.02.0003 >> ;Flash: Secondary Boot ROM Version : WC.17.02.0003 >> ;Flash: Default Boot Image : Primary >> ;Flash: Default Boot ROM : Primary >> >> >> >> >> Le ven. 20 déc. 2019, à 09 h 37, henri hemery a >> écrit : >> >>> Hi Guisepp, >>> >>> For me, the problem I still have with tis Aruba/HP switches that run >>> comware 5 I think, it is the authentication. >>> The enable mode ask for username+password again, and it seems that the >>> scripts are not designed for that >>> >>> If someone found the solution, I take it! >>> >>> On Wed, Dec 18, 2019 at 10:48 AM Guisepp Rodriguez >>> wrote: >>> Ok, thanks. Le mer. 18 déc. 2019, à 10 h 41, henri hemery a écrit : > I am using 3.9 > > On Wed, Dec 18, 2019 at 9:48 AM Guisepp Rodriguez > wrote: > >> What version of rancid do you have? >> >> Le mer. 18 déc. 2019, à 09 h 24, henri hemery >> a écrit : >> >>> Hi Guisepp, >>> >>> I have Aruba JL258A 2930F-8G-PoE+-2SFP+ in production, and I use >>> hlogin and it works: >>> >>> [rancid@xxxswbkp1 bin]$ ./hlogin >>> xxsw3 >>> spawn telnet -K XXXsw3 >>> Trying 10.X.X.X... >>> Connected to XXXsw3. >>> Escape character is '^]'. >>> >>> On Wed, Dec 18, 2019 at 9:02 AM Guisepp Rodriguez < >>> guisr...@gmail.com> wrote: >>> What version of Rancid I need? I use rancid 3.7 and for Aruba 2930M I use hlogin, hrancid. This is the output error: [rancid@rancid rancid]$ ./bin/hrancid -t hp -d xx.xx.xx.xx executing hlogin -t 90 -c"show version;show flash;show system-information;show system information;show module;show stack;show tech transceivers;show config files;show config status;write term" xx.xx.xx.xx sh: hlogin: command not found xx.xx.xx.xx: missed cmd(s): all commands xx.xx.xx.xx: End of run not found xx.xx.xx.xx: clean_run is false xx.xx.xx.xx: found_end is false ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss >>> >> >> -- >> *Guisepp Rodriguez* >> >> Cell: (001) 514 627-9441 >> Tél: (001) 450 655-5384 >> >> >> -- *Guisepp Rodriguez* Cell: (001) 514 627-9441 Tél: (001) 450 655-5384 >> >> -- >> *Guisepp Rodriguez* >> >> Cell: (001) 514 627-9441 >> Tél: (001) 450 655-5384 >> >> >> -- *Guisepp Rodriguez* Cell: (001) 514 627-9441 Tél: (001) 450 655-5384 ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
Re: [rancid] Aruba 2930M
Cool for you! Can you tell me how you configured the authentication on the switch? Does the rancid user get particular privilege mode? In you .cloginrc file, is it autoenable? On Fri, Dec 20, 2019 at 9:45 AM Guisepp Rodriguez wrote: > I notice that the backup its done! Even if the command hrancid doesn't > work when I test > > ./bin/hrancid -t hp -d xx.xx.xx.xx > > * > [rancid@rancid ~]$ more > /usr/local/rancid/var/xxx/configs/xx.xx.xx.xx > ;RANCID-CONTENT-TYPE: hp > ; > ;Serial Number: x > ; > ;Memory: 331M > ; > ;Image: stamp: > > /ws/swbuildm/rel_ukiah_qaoff/code/build/lvm(swbuildm_rel_ukiah_qaoff_rel_ukiah) > ;Image: Jul 21 2017 14:09:42 > ;Image: WC.16.04.0008 > ;Image: 423 > ;Image: Boot Image: Primary > ;Image: Boot ROM Version:WC.17.02.0003 > ;Image: Active Boot ROM: Primary > ;Image: ROM WC.17.02.0003 > ; > ;Flash: Image Size (bytes) Date Version > ;Flash: - -- > ;Flash: Primary Image:28278126 07/21/17 WC.16.04.0008 > ;Flash: Secondary Image :28278126 07/21/17 WC.16.04.0008 > ;Flash: Boot ROM Version > ;Flash: > ;Flash: Primary Boot ROM Version : WC.17.02.0003 > ;Flash: Secondary Boot ROM Version : WC.17.02.0003 > ;Flash: Default Boot Image : Primary > ;Flash: Default Boot ROM : Primary > > > > > Le ven. 20 déc. 2019, à 09 h 37, henri hemery a > écrit : > >> Hi Guisepp, >> >> For me, the problem I still have with tis Aruba/HP switches that run >> comware 5 I think, it is the authentication. >> The enable mode ask for username+password again, and it seems that the >> scripts are not designed for that >> >> If someone found the solution, I take it! >> >> On Wed, Dec 18, 2019 at 10:48 AM Guisepp Rodriguez >> wrote: >> >>> Ok, thanks. >>> >>> Le mer. 18 déc. 2019, à 10 h 41, henri hemery >>> a écrit : >>> I am using 3.9 On Wed, Dec 18, 2019 at 9:48 AM Guisepp Rodriguez wrote: > What version of rancid do you have? > > Le mer. 18 déc. 2019, à 09 h 24, henri hemery > a écrit : > >> Hi Guisepp, >> >> I have Aruba JL258A 2930F-8G-PoE+-2SFP+ in production, and I use >> hlogin and it works: >> >> [rancid@xxxswbkp1 bin]$ ./hlogin >> xxsw3 >> spawn telnet -K XXXsw3 >> Trying 10.X.X.X... >> Connected to XXXsw3. >> Escape character is '^]'. >> >> On Wed, Dec 18, 2019 at 9:02 AM Guisepp Rodriguez >> wrote: >> >>> What version of Rancid I need? I use rancid 3.7 and for Aruba 2930M >>> I use hlogin, hrancid. This is the output error: >>> >>> [rancid@rancid rancid]$ ./bin/hrancid -t hp -d xx.xx.xx.xx >>> executing hlogin -t 90 -c"show version;show flash;show >>> system-information;show system information;show module;show stack;show >>> tech >>> transceivers;show config files;show config status;write term" >>> xx.xx.xx.xx >>> sh: hlogin: command not found >>> xx.xx.xx.xx: missed cmd(s): all commands >>> xx.xx.xx.xx: End of run not found >>> xx.xx.xx.xx: clean_run is false >>> xx.xx.xx.xx: found_end is false >>> >>> >>> ___ >>> Rancid-discuss mailing list >>> Rancid-discuss@shrubbery.net >>> http://www.shrubbery.net/mailman/listinfo/rancid-discuss >>> >> > > -- > *Guisepp Rodriguez* > > Cell: (001) 514 627-9441 > Tél: (001) 450 655-5384 > > > >>> >>> -- >>> *Guisepp Rodriguez* >>> >>> Cell: (001) 514 627-9441 >>> Tél: (001) 450 655-5384 >>> >>> >>> > > -- > *Guisepp Rodriguez* > > Cell: (001) 514 627-9441 > Tél: (001) 450 655-5384 > > > ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
Re: [rancid] Aruba 2930M
I notice that the backup its done! Even if the command hrancid doesn't work when I test ./bin/hrancid -t hp -d xx.xx.xx.xx * [rancid@rancid ~]$ more /usr/local/rancid/var/xxx/configs/xx.xx.xx.xx ;RANCID-CONTENT-TYPE: hp ; ;Serial Number: x ; ;Memory: 331M ; ;Image: stamp: /ws/swbuildm/rel_ukiah_qaoff/code/build/lvm(swbuildm_rel_ukiah_qaoff_rel_ukiah) ;Image: Jul 21 2017 14:09:42 ;Image: WC.16.04.0008 ;Image: 423 ;Image: Boot Image: Primary ;Image: Boot ROM Version:WC.17.02.0003 ;Image: Active Boot ROM: Primary ;Image: ROM WC.17.02.0003 ; ;Flash: Image Size (bytes) Date Version ;Flash: - -- ;Flash: Primary Image:28278126 07/21/17 WC.16.04.0008 ;Flash: Secondary Image :28278126 07/21/17 WC.16.04.0008 ;Flash: Boot ROM Version ;Flash: ;Flash: Primary Boot ROM Version : WC.17.02.0003 ;Flash: Secondary Boot ROM Version : WC.17.02.0003 ;Flash: Default Boot Image : Primary ;Flash: Default Boot ROM : Primary Le ven. 20 déc. 2019, à 09 h 37, henri hemery a écrit : > Hi Guisepp, > > For me, the problem I still have with tis Aruba/HP switches that run > comware 5 I think, it is the authentication. > The enable mode ask for username+password again, and it seems that the > scripts are not designed for that > > If someone found the solution, I take it! > > On Wed, Dec 18, 2019 at 10:48 AM Guisepp Rodriguez > wrote: > >> Ok, thanks. >> >> Le mer. 18 déc. 2019, à 10 h 41, henri hemery a >> écrit : >> >>> I am using 3.9 >>> >>> On Wed, Dec 18, 2019 at 9:48 AM Guisepp Rodriguez >>> wrote: >>> What version of rancid do you have? Le mer. 18 déc. 2019, à 09 h 24, henri hemery a écrit : > Hi Guisepp, > > I have Aruba JL258A 2930F-8G-PoE+-2SFP+ in production, and I use > hlogin and it works: > > [rancid@xxxswbkp1 bin]$ ./hlogin > xxsw3 > spawn telnet -K XXXsw3 > Trying 10.X.X.X... > Connected to XXXsw3. > Escape character is '^]'. > > On Wed, Dec 18, 2019 at 9:02 AM Guisepp Rodriguez > wrote: > >> What version of Rancid I need? I use rancid 3.7 and for Aruba 2930M I >> use hlogin, hrancid. This is the output error: >> >> [rancid@rancid rancid]$ ./bin/hrancid -t hp -d xx.xx.xx.xx >> executing hlogin -t 90 -c"show version;show flash;show >> system-information;show system information;show module;show stack;show >> tech >> transceivers;show config files;show config status;write term" xx.xx.xx.xx >> sh: hlogin: command not found >> xx.xx.xx.xx: missed cmd(s): all commands >> xx.xx.xx.xx: End of run not found >> xx.xx.xx.xx: clean_run is false >> xx.xx.xx.xx: found_end is false >> >> >> ___ >> Rancid-discuss mailing list >> Rancid-discuss@shrubbery.net >> http://www.shrubbery.net/mailman/listinfo/rancid-discuss >> > -- *Guisepp Rodriguez* Cell: (001) 514 627-9441 Tél: (001) 450 655-5384 >> >> -- >> *Guisepp Rodriguez* >> >> Cell: (001) 514 627-9441 >> Tél: (001) 450 655-5384 >> >> >> -- *Guisepp Rodriguez* Cell: (001) 514 627-9441 Tél: (001) 450 655-5384 ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
Re: [rancid] Aruba 2930M
Hi Guisepp, For me, the problem I still have with tis Aruba/HP switches that run comware 5 I think, it is the authentication. The enable mode ask for username+password again, and it seems that the scripts are not designed for that If someone found the solution, I take it! On Wed, Dec 18, 2019 at 10:48 AM Guisepp Rodriguez wrote: > Ok, thanks. > > Le mer. 18 déc. 2019, à 10 h 41, henri hemery a > écrit : > >> I am using 3.9 >> >> On Wed, Dec 18, 2019 at 9:48 AM Guisepp Rodriguez >> wrote: >> >>> What version of rancid do you have? >>> >>> Le mer. 18 déc. 2019, à 09 h 24, henri hemery >>> a écrit : >>> Hi Guisepp, I have Aruba JL258A 2930F-8G-PoE+-2SFP+ in production, and I use hlogin and it works: [rancid@xxxswbkp1 bin]$ ./hlogin xxsw3 spawn telnet -K XXXsw3 Trying 10.X.X.X... Connected to XXXsw3. Escape character is '^]'. On Wed, Dec 18, 2019 at 9:02 AM Guisepp Rodriguez wrote: > What version of Rancid I need? I use rancid 3.7 and for Aruba 2930M I > use hlogin, hrancid. This is the output error: > > [rancid@rancid rancid]$ ./bin/hrancid -t hp -d xx.xx.xx.xx > executing hlogin -t 90 -c"show version;show flash;show > system-information;show system information;show module;show stack;show > tech > transceivers;show config files;show config status;write term" xx.xx.xx.xx > sh: hlogin: command not found > xx.xx.xx.xx: missed cmd(s): all commands > xx.xx.xx.xx: End of run not found > xx.xx.xx.xx: clean_run is false > xx.xx.xx.xx: found_end is false > > > ___ > Rancid-discuss mailing list > Rancid-discuss@shrubbery.net > http://www.shrubbery.net/mailman/listinfo/rancid-discuss > >>> >>> -- >>> *Guisepp Rodriguez* >>> >>> Cell: (001) 514 627-9441 >>> Tél: (001) 450 655-5384 >>> >>> >>> > > -- > *Guisepp Rodriguez* > > Cell: (001) 514 627-9441 > Tél: (001) 450 655-5384 > > > ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
