[RBW] Re: Rack Options

[Kai Vierstra]

Use a longer bolt and you can mount struts to both sides of en eyelet, using a 
locknut on the inside. That might resolve any tangling/proximity issues with 
the struts.
It's worked for me
-Kai
Brooklyn NY 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Rack Options

[dougP]

I've had both the Tubus Cosmo and Nitto R-14 on my Atlantis with SKS. 

dougP

On Friday, September 2, 2016 at 8:58:39 AM UTC-7, A CT Cyclist wrote:
>
> Besides the Nitto and Clem racks that Riv sells, what rear rack does 
> everyone use with the SKS fenders? I recently changed the fenders on my 
> Bridgestone and found that the V shaped fenders stays of the SKS fenders 
> weren't compatible with my existing rack since they share the same braze 
> on. The rack tangs are very thick and there's just too much overlap with 
> the v stays. Here is a picture of the Biria rack. 
>
>
> 
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Rack Options

[A CT Cyclist]

I don't know, if you click on the photo of the rack you can see how bulky 
the rack is where the tang slides up and down to fit different size bikes. 
The fact that the rack is so bulky at that point and the SKS fender stays 
come right down the middle of the of the wheel makes it all too much to fit 
on a single eyelet. It occurs to me while I'm typing this that the first 
part of the fender stays V usually lands at about 1:00 but I rotated the 
fender a little so it wouldn't fall as far down behind the rear tire and so 
I could have full coverage in front of the bottom bracket. Essentially I 
cut the part of the fender with the cut out for the front derailleur off 
since I don't have one. Anyway that moved the front part of the V to about 
12:00. 

I hope that isn't too confusing, I think either way those stays and that 
rack aren't going to play well. Do you have some pictures of your rack and 
sks bike set up?

On Friday, eptember 2, 2016 at 11:58:39 AM UTC-4, A CT Cyclist wrote:
>
> Besides the Nitto and Clem racks that Riv sells, what rear rack does 
> everyone use with the SKS fenders? I recently changed the fenders on my 
> Bridgestone and found that the V shaped fenders stays of the SKS fenders 
> weren't compatible with my existing rack since they share the same braze 
> on. The rack tangs are very thick and there's just too much overlap with 
> the v stays. Here is a picture of the Biria rack. 
>
>
> 
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.