RE: [RBW] ISO French/22 mm quill diameter, 10 cm stem, 26.0, with at least 10 cm between max height line and top of extension -- 12 cm better.
I did one for a Motobecane Super Mirage, late '70s I think (the bike, not the sanding exercise). Took me 3 or 4 hours hours with pretty fine sandpaper, watching some football. -Original Message- From: rbw-owners-bunch@googlegroups.com [mailto:rbw-owners-bu...@googlegroups.com] On Behalf Of PATRICK MOORE Sent: Friday, December 03, 2010 12:45 PM To: Internet-bob; rbw-owners-bunch Subject: [RBW] ISO French/22 mm quill diameter, 10 cm stem, 26.0, with at least 10 cm between max height line and top of extension -- 12 cm better. I suppose I could sand down a Technomic or T Deluxe, no? How hard is it? I've never done this. -- Patrick Moore Albuquerque, NM For professional resumes, contact Patrick Moore, ACRW at resumespecialt...@gmail.com -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. -- To ensure compliance with Treasury Department regulations, we advise you that, unless otherwise expressly indicated, any federal tax advice contained in this message was not intended or written to be used, and cannot be used, for the purpose of (i) avoiding tax-related penalties under the Internal Revenue Code or applicable state or local tax law provisions or (ii) promoting, marketing or recommending to another party any tax-related matters addressed herein. This email (and any attachments thereto) is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this email, you are hereby notified that any dissemination, distribution or copying of this email (and any attachments thereto) is strictly prohibited. If you receive this email in error please immediately notify me at (212) 735-3000 and permanently delete the original email (and any copy of any email) and any printout thereof. Further information about the firm, a list of the Partners and their professional qualifications will be provided upon request. == -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
Re: [RBW] ISO French/22 mm quill diameter, 10 cm stem, 26.0, with at least 10 cm between max height line and top of extension -- 12 cm better.
I'm with Jim Thill. On my wife's '70s Motobecane I used a brake hone to ream out the steerer tube the 0,2 mm. That way I was now free to use any 22.2mm quill. The hone worked, but if you could find a reamer as Jim suggested it would be a lot faster, it took me quite a few hours using the hone! Kerry Kunsman San Diego, CA At 09:44 AM 12/3/2010, PATRICK MOORE wrote: I suppose I could sand down a Technomic or T Deluxe, no? How hard is it? I've never done this. -- Patrick Moore Albuquerque, NM For professional resumes, contact Patrick Moore, ACRW at resumespecialt...@gmail.com -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. - No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1153 / Virus Database: 426/3275 - Release Date: 11/23/10 Internal Virus Database is out of date. - No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1153 / Virus Database: 426/3275 - Release Date: 11/23/10 Internal Virus Database is out of date. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
Re: [RBW] ISO French/22 mm quill diameter, 10 cm stem, 26.0, with at least 10 cm between max height line and top of extension -- 12 cm better.
Thanks. Not quite sure what a hone is, and all the reamers I've seen via Google cost $60 and upward, but I'll ask at the local True Value, where they know these things. On Fri, Dec 3, 2010 at 7:47 PM, Kerry Kunsman wrote: > I'm with Jim Thill. On my wife's '70s Motobecane I used a brake hone to > ream out the steerer tube the 0,2 mm. That way I was now free to use any > 22.2mm quill. The hone worked, but if you could find a reamer as Jim > suggested it would be a lot faster, it took me quite a few hours using the > hone! > > Kerry Kunsman > San Diego, CA > > > At 09:44 AM 12/3/2010, PATRICK MOORE wrote: >> >> I suppose I could sand down a Technomic or T Deluxe, no? How hard is >> it? I've never done this. >> >> -- >> Patrick Moore >> Albuquerque, NM >> For professional resumes, contact >> Patrick Moore, ACRW at resumespecialt...@gmail.com >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To post to this group, send email to rbw-owners-bu...@googlegroups.com. >> To unsubscribe from this group, send email to >> rbw-owners-bunch+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/rbw-owners-bunch?hl=en. >> >> >> >> - >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 10.0.1153 / Virus Database: 426/3275 - Release Date: 11/23/10 >> Internal Virus Database is out of date. >> >> >> >> - >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 10.0.1153 / Virus Database: 426/3275 - Release Date: 11/23/10 >> Internal Virus Database is out of date. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- Patrick Moore Albuquerque, NM For professional resumes, contact Patrick Moore, ACRW at resumespecialt...@gmail.com -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
Re: [RBW] ISO French/22 mm quill diameter, 10 cm stem, 26.0, with at least 10 cm between max height line and top of extension -- 12 cm better.
Check at the auto parts store. Kerry At 08:22 PM 12/3/2010, PATRICK MOORE wrote: Thanks. Not quite sure what a hone is, and all the reamers I've seen via Google cost $60 and upward, but I'll ask at the local True Value, where they know these things. On Fri, Dec 3, 2010 at 7:47 PM, Kerry Kunsman wrote: > I'm with Jim Thill. On my wife's '70s Motobecane I used a brake hone to > ream out the steerer tube the 0,2 mm. That way I was now free to use any > 22.2mm quill. The hone worked, but if you could find a reamer as Jim > suggested it would be a lot faster, it took me quite a few hours using the > hone! > > Kerry Kunsman > San Diego, CA > > > At 09:44 AM 12/3/2010, PATRICK MOORE wrote: >> >> I suppose I could sand down a Technomic or T Deluxe, no? How hard is >> it? I've never done this. >> >> -- >> Patrick Moore >> Albuquerque, NM >> For professional resumes, contact >> Patrick Moore, ACRW at resumespecialt...@gmail.com >> >> -- -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.