Re: [TANKS] Re: 2060 Attachment Chain Search

[odysseyslipways]

Doug, what was that place you ordered attachment chain from?
 
Chris,
_Odyssey  Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) 

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: 2060 Attachment Chain Search

[Derek Engelhaupt]

Mark,

Abrams are definitely OK.  Motors are a tad heavy, but they sound like they
will do just fine.  I think some of the tanks using the EV Warriors with a
gear reduction end up weighing in around 10-15lbs.  No tank is too big or
really too small (if built to 1/6th scale).  I think some of the Abrams guys
will chime in, but I can try and steer you away from 1/7th scale.  Tom Lum (
http://www.rctankcombat.com/tanks/T059/) originally built his to 1/7th scale
and has since built it to 1/6th scale to gain some height in the turret.
Check out his build for details.  I'd have to measure the length of my KV-2,
but in 1/6th scale I believe it's around 44" long.  BTW, it's usually better
to start a new thread (compose a new Email with new subject line) rather
than get off topic in a current thread.  It just makes it easier to search
the archives.  Good luck with the Abrams.

Derek
T065

On Tue, Dec 29, 2009 at 4:59 PM, Mark_123521
wrote:

> Derek,
>
> Thanks for taking a run at getting chain!
>
> I a also trying to "get off the ground" building a tank.
>
> Need advice:
>
> 1.   Thinking about an M1 Abrams tank, but is it OK to model a non WW2
> tank?
>
> 2.   M1 Abrams is a BIG tank -- 1/7 th scale makes it 44 inches long
> (plus the gun barrel). Tub width = 13 inches wide @ 1/7 scale. Is
> 1/7th scale and 44 inches long gonna be OK? (I know the rules allow
> variations from 1/6 scale, but is 44 inches too big?)
>
> 3.   I have some nice motors: 24 volt, 1100 RPM, 4" diameter, 7.5 inch
> long(+ 1.25 inches for the shaft), full ball bearings, but they weigh
> 11.5 pounds each. Should only need 2 to 1 sprocket ratio. The motors
> could be spaced fore and aft, rather than side by side as I see in
> most designs.
>
> 4. I will go to the scrap yard tomorrow and purchase some 1/4 inch
> aluminum plate for the "Tub" sidewalls and 3/16 plate for the tub
> bottom.
>
> 5. On a previous trip to the scrapyard, I found an aluminum "T" shaped
> extrusion that is 2.5 inches wide and .09 inch thick (purchased 16
> feet of it). I think I can cut it into segments and use it for the
> center guide on a TTS track. I have a sheet of 1/4 inch, gray, PVC
> that I can cut into 3.5 inch wide by .75 long treads.
> I can liminate the PVC treads with the treadmill track and aluminum
> "T" segments to make track.
>
> Have a Lathe and Milling machine in the basement, so working with
> aluminum is no problem.
>
> Could use all the advice I can get!
>
> Thanks!
> Mark
>
>
> On Dec 29, 11:54 am, Derek Engelhaupt  wrote:
> > Well, they responded and I doubt I will do this since their minimum order
> to
> > ship the the US is $3000.
> >
> > Dear Derek,
> >
> > Thank you very much for your email and we are glad to learn your
> interesting
> > in our products of double pitch attachment chain.
> >
> > However, there is a min order q'ty as 200~300ft per size and US$3000 per
> > shipment to make an oversea shipment. Could you let us know if there is
> any
> > other chain items you need, we would like to make an offer at the same
> > time. Here is our website,www.mccchain.com.tw, wish you can find more
> items
> > you are interesting in.
> >
> > Taking this chance, we would like to learn more about your company.
> Please
> > advise your company name, contact number, fax number and what brand of
> chain
> > you are current using.
> >
> > Look forward to hear from you soon.
> >
> > With best regards,
> >
> > Erina Ou / Sales Dept
> > Ming Chang Traffic Parts Mfg
> > Web :www.mccchain.com.tw
> > Fax + 886-8-7229920
> >
> > I have one more option to check into today.  I'll see what they say.
> >
> > Derek
> > T065
> >
> >
> >
> > On Tue, Dec 29, 2009 at 10:59 AM, Steve Tyng  wrote:
> > > I'll BUILD TTS track at those prices!  ;-)
> >
> > > Steve "TTS is BEST" Tyng
> >
> > > On Dec 28, 4:10 pm, wsmon...@aim.com wrote:
> > > >  I might have some more for sale at those prices.
> >
> > > > Will
> >
> > > > -Original Message-
> > > > From: Mark_123521 
> > > > To: R/C Tank Combat 
> > > > Sent: Mon, Dec 28, 2009 3:34 pm
> > > > Subject: [TANKS] Re: 2060 Attachment Chain Search
> >
> > > > I just called tsubaki (http://www.ustsubaki.com/).
> > > > They make chain.
> > > > The sales person set me up with a part number C2060h k1 2l rb.
> > > > It is 2060, double pitch, with an attachment every other link.
> >

[TANKS] Re: 2060 Attachment Chain Search

[Mark_123521]

Derek,

Thanks for taking a run at getting chain!

I a also trying to "get off the ground" building a tank.

Need advice:

1.   Thinking about an M1 Abrams tank, but is it OK to model a non WW2
tank?

2.   M1 Abrams is a BIG tank -- 1/7 th scale makes it 44 inches long
(plus the gun barrel). Tub width = 13 inches wide @ 1/7 scale. Is
1/7th scale and 44 inches long gonna be OK? (I know the rules allow
variations from 1/6 scale, but is 44 inches too big?)

3.   I have some nice motors: 24 volt, 1100 RPM, 4" diameter, 7.5 inch
long(+ 1.25 inches for the shaft), full ball bearings, but they weigh
11.5 pounds each. Should only need 2 to 1 sprocket ratio. The motors
could be spaced fore and aft, rather than side by side as I see in
most designs.

4. I will go to the scrap yard tomorrow and purchase some 1/4 inch
aluminum plate for the "Tub" sidewalls and 3/16 plate for the tub
bottom.

5. On a previous trip to the scrapyard, I found an aluminum "T" shaped
extrusion that is 2.5 inches wide and .09 inch thick (purchased 16
feet of it). I think I can cut it into segments and use it for the
center guide on a TTS track. I have a sheet of 1/4 inch, gray, PVC
that I can cut into 3.5 inch wide by .75 long treads.
I can liminate the PVC treads with the treadmill track and aluminum
"T" segments to make track.

Have a Lathe and Milling machine in the basement, so working with
aluminum is no problem.

Could use all the advice I can get!

Thanks!
Mark


On Dec 29, 11:54 am, Derek Engelhaupt  wrote:
> Well, they responded and I doubt I will do this since their minimum order to
> ship the the US is $3000.
>
> Dear Derek,
>
> Thank you very much for your email and we are glad to learn your interesting
> in our products of double pitch attachment chain.
>
> However, there is a min order q'ty as 200~300ft per size and US$3000 per
> shipment to make an oversea shipment. Could you let us know if there is any
> other chain items you need, we would like to make an offer at the same
> time. Here is our website,www.mccchain.com.tw, wish you can find more items
> you are interesting in.
>
> Taking this chance, we would like to learn more about your company. Please
> advise your company name, contact number, fax number and what brand of chain
> you are current using.
>
> Look forward to hear from you soon.
>
> With best regards,
>
> Erina Ou / Sales Dept
> Ming Chang Traffic Parts Mfg
> Web :www.mccchain.com.tw
> Fax + 886-8-7229920
>
> I have one more option to check into today.  I'll see what they say.
>
> Derek
> T065
>
>
>
> On Tue, Dec 29, 2009 at 10:59 AM, Steve Tyng  wrote:
> > I'll BUILD TTS track at those prices!  ;-)
>
> > Steve "TTS is BEST" Tyng
>
> > On Dec 28, 4:10 pm, wsmon...@aim.com wrote:
> > >  I might have some more for sale at those prices.
>
> > > Will
>
> > > -Original Message-
> > > From: Mark_123521 
> > > To: R/C Tank Combat 
> > > Sent: Mon, Dec 28, 2009 3:34 pm
> > > Subject: [TANKS] Re: 2060 Attachment Chain Search
>
> > > I just called tsubaki (http://www.ustsubaki.com/).
> > > They make chain.
> > > The sales person set me up with a part number C2060h k1 2l rb.
> > > It is 2060, double pitch, with an attachment every other link.
> > > Is that the right stuff?
> > > His list price was $47 per foot !!
>
> > > WHAT???
>
> > > Mark
>
> > > On Dec 22, 5:51 pm, Ben Holko  wrote:
> > > > the stuff I bought from there was perfect, same quality as any local
> > chain I
> > > have ever seen.
>
> > > > 
> > > > From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on
> > behalf
> > > of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> > > > Sent: Wednesday, December 23, 2009 10:32 AM
> > > > To: rctankcombat@googlegroups.com
> > > > Subject: Re: [TANKS] 2060 Attachment Chain Search
>
> > > > In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time,
> > > b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
>
> > > > shipping will cost a bit, but depending on how much you buy you can
> > save a
> > > lot, the chain is cheap. From memory I paid about USD$2 per foot for #50
> > > attachment chain.
>
> > > > Ben
> > > > at this point even if it was a unbeatable price, with the stuff that's
> > been
> > > coming from China, i'd be a bit leery to buy from them
>
> > > > Chris,
> > > > Odyssey Slipways<http://hometown.aol.com/odysseyslipways/

Re: [TANKS] Re: 2060 Attachment Chain Search

[Derek Engelhaupt]

Well, they responded and I doubt I will do this since their minimum order to
ship the the US is $3000.

Dear Derek,

Thank you very much for your email and we are glad to learn your interesting
in our products of double pitch attachment chain.

However, there is a min order q'ty as 200~300ft per size and US$3000 per
shipment to make an oversea shipment. Could you let us know if there is any
other chain items you need, we would like to make an offer at the same
time. Here is our website, www.mccchain.com.tw, wish you can find more items
you are interesting in.

Taking this chance, we would like to learn more about your company. Please
advise your company name, contact number, fax number and what brand of chain
you are current using.

Look forward to hear from you soon.

With best regards,

Erina Ou / Sales Dept
Ming Chang Traffic Parts Mfg
Web : www.mccchain.com.tw
Fax + 886-8-7229920

I have one more option to check into today.  I'll see what they say.

Derek
T065


On Tue, Dec 29, 2009 at 10:59 AM, Steve Tyng  wrote:

> I'll BUILD TTS track at those prices!  ;-)
>
> Steve "TTS is BEST" Tyng
>
>
> On Dec 28, 4:10 pm, wsmon...@aim.com wrote:
> >  I might have some more for sale at those prices.
> >
> > Will
> >
> > -Original Message-
> > From: Mark_123521 
> > To: R/C Tank Combat 
> > Sent: Mon, Dec 28, 2009 3:34 pm
> > Subject: [TANKS] Re: 2060 Attachment Chain Search
> >
> > I just called tsubaki (http://www.ustsubaki.com/).
> > They make chain.
> > The sales person set me up with a part number C2060h k1 2l rb.
> > It is 2060, double pitch, with an attachment every other link.
> > Is that the right stuff?
> > His list price was $47 per foot !!
> >
> > WHAT???
> >
> > Mark
> >
> > On Dec 22, 5:51 pm, Ben Holko  wrote:
> > > the stuff I bought from there was perfect, same quality as any local
> chain I
> > have ever seen.
> >
> > > 
> > > From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on
> behalf
> > of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> > > Sent: Wednesday, December 23, 2009 10:32 AM
> > > To: rctankcombat@googlegroups.com
> > > Subject: Re: [TANKS] 2060 Attachment Chain Search
> >
> > > In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time,
> > b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
> >
> > > shipping will cost a bit, but depending on how much you buy you can
> save a
> > lot, the chain is cheap. From memory I paid about USD$2 per foot for #50
> > attachment chain.
> >
> > > Ben
> > > at this point even if it was a unbeatable price, with the stuff that's
> been
> > coming from China, i'd be a bit leery to buy from them
> >
> > > Chris,
> > > Odyssey Slipways<http://hometown.aol.com/odysseyslipways/index.html>
> >
> > > --
> > > You are currently subscribed to the "R/C Tank Combat" group.
> > > To post a message, send email to rctankcombat@googlegroups.com
> > > To unsubscribe, send email to
> rctankcombat-unsubscr...@googlegroups.com
> > > Visit the group athttp://groups.google.com/group/rctankcombat
> >
> > --
> > You are currently subscribed to the "R/C Tank Combat" group.
> > To post a message, send email to rctankcombat@googlegroups.com
> > To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> > Visit the group athttp://groups.google.com/group/rctankcombat
> >
> >
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

[TANKS] Re: 2060 Attachment Chain Search

[Steve Tyng]

I'll BUILD TTS track at those prices!  ;-)

Steve "TTS is BEST" Tyng


On Dec 28, 4:10 pm, wsmon...@aim.com wrote:
>  I might have some more for sale at those prices.
>
> Will
>
> -Original Message-
> From: Mark_123521 
> To: R/C Tank Combat 
> Sent: Mon, Dec 28, 2009 3:34 pm
> Subject: [TANKS] Re: 2060 Attachment Chain Search
>
> I just called tsubaki (http://www.ustsubaki.com/).
> They make chain.
> The sales person set me up with a part number C2060h k1 2l rb.
> It is 2060, double pitch, with an attachment every other link.
> Is that the right stuff?
> His list price was $47 per foot !!
>
> WHAT???
>
> Mark
>
> On Dec 22, 5:51 pm, Ben Holko  wrote:
> > the stuff I bought from there was perfect, same quality as any local chain I
> have ever seen.
>
> > 
> > From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on 
> > behalf
> of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> > Sent: Wednesday, December 23, 2009 10:32 AM
> > To: rctankcombat@googlegroups.com
> > Subject: Re: [TANKS] 2060 Attachment Chain Search
>
> > In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time,
> b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
>
> > shipping will cost a bit, but depending on how much you buy you can save a
> lot, the chain is cheap. From memory I paid about USD$2 per foot for #50
> attachment chain.
>
> > Ben
> > at this point even if it was a unbeatable price, with the stuff that's been
> coming from China, i'd be a bit leery to buy from them
>
> > Chris,
> > Odyssey Slipways<http://hometown.aol.com/odysseyslipways/index.html>
>
> > --
> > You are currently subscribed to the "R/C Tank Combat" group.
> > To post a message, send email to rctankcombat@googlegroups.com
> > To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> > Visit the group athttp://groups.google.com/group/rctankcombat
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group athttp://groups.google.com/group/rctankcombat
>
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

[TANKS] Re: 2060 Attachment Chain Search

[Joe Sommer]

On Dec 28, 9:23 pm, Derek Engelhaupt  wrote:
> Tsubaki chain is expensive as heck.  And no, not the right chain.  It would
> have to have the
> K-1 attachment on EVERY link.  That's why I was going to look into Ben's
> supplier and see
> if anyone else wanted to go in on a group buy.  I could front the cash for
> the buy and distribute
> it once I got it.  I've bought and sold stuff to Doug Conn and Joe Sommer so
> I think they could
> vouch for me.  ;)  I just Emailed Ben's supplier for a quote on the 2060
> chain.  I'll let everyone
> know what they come back with.

Derek,

Ben's cost is much lower because he is in Australia.

Shipping from China to the US will be very expensive.
I purchased M01 motors for $30 each but shipping was
also $30 each.

I have a federal EIN for Anvilus Machine Works and
can order if the supplier will only sell to a corporate
account.

Joe

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: 2060 Attachment Chain Search

[Derek Engelhaupt]

US

Derek

On Mon, Dec 28, 2009 at 9:11 PM, Mark_123521
wrote:

> Derek
>  Are you in the US or UK?
> Mark
>
> On Dec 28, 8:23 pm, Derek Engelhaupt  wrote:
> > Tsubaki chain is expensive as heck.  And no, not the right chain.  It
> would
> > have to have the
> > K-1 attachment on EVERY link.  That's why I was going to look into Ben's
> > supplier and see
> > if anyone else wanted to go in on a group buy.  I could front the cash
> for
> > the buy and distribute
> > it once I got it.  I've bought and sold stuff to Doug Conn and Joe Sommer
> so
> > I think they could
> > vouch for me.  ;)  I just Emailed Ben's supplier for a quote on the 2060
> > chain.  I'll let everyone
> > know what they come back with.
> >
> > Derek
> > T065
> >
> > On Mon, Dec 28, 2009 at 2:34 PM, Mark_123521
> > wrote:
> >
> >
> >
> > > I just called tsubaki (http://www.ustsubaki.com/).
> > > They make chain.
> > > The sales person set me up with a part number C2060h k1 2l rb.
> > > It is 2060, double pitch, with an attachment every other link.
> > > Is that the right stuff?
> > > His list price was $47 per foot !!
> >
> > > WHAT???
> >
> > > Mark
> >
> > > On Dec 22, 5:51 pm, Ben Holko  wrote:
> > > > the stuff I bought from there was perfect, same quality as any local
> > > chain I have ever seen.
> >
> > > > 
> > > > From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com]
> on
> > > behalf of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> > > > Sent: Wednesday, December 23, 2009 10:32 AM
> > > > To: rctankcombat@googlegroups.com
> > > > Subject: Re: [TANKS] 2060 Attachment Chain Search
> >
> > > > In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time,
> > > b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
> >
> > > > shipping will cost a bit, but depending on how much you buy you can
> save
> > > a lot, the chain is cheap. From memory I paid about USD$2 per foot for
> #50
> > > attachment chain.
> >
> > > > Ben- Hide quoted text -
> >
> > - Show quoted text -
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

[TANKS] Re: 2060 Attachment Chain Search

[Mark_123521]

Derek
 Are you in the US or UK?
Mark

On Dec 28, 8:23 pm, Derek Engelhaupt  wrote:
> Tsubaki chain is expensive as heck.  And no, not the right chain.  It would
> have to have the
> K-1 attachment on EVERY link.  That's why I was going to look into Ben's
> supplier and see
> if anyone else wanted to go in on a group buy.  I could front the cash for
> the buy and distribute
> it once I got it.  I've bought and sold stuff to Doug Conn and Joe Sommer so
> I think they could
> vouch for me.  ;)  I just Emailed Ben's supplier for a quote on the 2060
> chain.  I'll let everyone
> know what they come back with.
>
> Derek
> T065
>
> On Mon, Dec 28, 2009 at 2:34 PM, Mark_123521
> wrote:
>
>
>
> > I just called tsubaki (http://www.ustsubaki.com/).
> > They make chain.
> > The sales person set me up with a part number C2060h k1 2l rb.
> > It is 2060, double pitch, with an attachment every other link.
> > Is that the right stuff?
> > His list price was $47 per foot !!
>
> > WHAT???
>
> > Mark
>
> > On Dec 22, 5:51 pm, Ben Holko  wrote:
> > > the stuff I bought from there was perfect, same quality as any local
> > chain I have ever seen.
>
> > > 
> > > From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on
> > behalf of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> > > Sent: Wednesday, December 23, 2009 10:32 AM
> > > To: rctankcombat@googlegroups.com
> > > Subject: Re: [TANKS] 2060 Attachment Chain Search
>
> > > In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time,
> > b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
>
> > > shipping will cost a bit, but depending on how much you buy you can save
> > a lot, the chain is cheap. From memory I paid about USD$2 per foot for #50
> > attachment chain.
>
> > > Ben- Hide quoted text -
>
> - Show quoted text -

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

[TANKS] Re: 2060 Attachment Chain Search

[Mark_123521]

Derek:

Let me know what the price is.
I am looking for 20 feet.

Thanks!
Mark


On Dec 28, 8:23 pm, Derek Engelhaupt  wrote:
> Tsubaki chain is expensive as heck.  And no, not the right chain.  It would
> have to have the
> K-1 attachment on EVERY link.  That's why I was going to look into Ben's
> supplier and see
> if anyone else wanted to go in on a group buy.  I could front the cash for
> the buy and distribute
> it once I got it.  I've bought and sold stuff to Doug Conn and Joe Sommer so
> I think they could
> vouch for me.  ;)  I just Emailed Ben's supplier for a quote on the 2060
> chain.  I'll let everyone
> know what they come back with.
>
> Derek
> T065
>
> On Mon, Dec 28, 2009 at 2:34 PM, Mark_123521
> wrote:
>
>
>
> > I just called tsubaki (http://www.ustsubaki.com/).
> > They make chain.
> > The sales person set me up with a part number C2060h k1 2l rb.
> > It is 2060, double pitch, with an attachment every other link.
> > Is that the right stuff?
> > His list price was $47 per foot !!
>
> > WHAT???
>
> > Mark
>
> > On Dec 22, 5:51 pm, Ben Holko  wrote:
> > > the stuff I bought from there was perfect, same quality as any local
> > chain I have ever seen.
>
> > > 
> > > From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on
> > behalf of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> > > Sent: Wednesday, December 23, 2009 10:32 AM
> > > To: rctankcombat@googlegroups.com
> > > Subject: Re: [TANKS] 2060 Attachment Chain Search
>
> > > In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time,
> > b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
>
> > > shipping will cost a bit, but depending on how much you buy you can save
> > a lot, the chain is cheap. From memory I paid about USD$2 per foot for #50
> > attachment chain.
>
> > > Ben- Hide quoted text -
>
> - Show quoted text -

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: 2060 Attachment Chain Search

[Derek Engelhaupt]

Tsubaki chain is expensive as heck.  And no, not the right chain.  It would
have to have the
K-1 attachment on EVERY link.  That's why I was going to look into Ben's
supplier and see
if anyone else wanted to go in on a group buy.  I could front the cash for
the buy and distribute
it once I got it.  I've bought and sold stuff to Doug Conn and Joe Sommer so
I think they could
vouch for me.  ;)  I just Emailed Ben's supplier for a quote on the 2060
chain.  I'll let everyone
know what they come back with.

Derek
T065

On Mon, Dec 28, 2009 at 2:34 PM, Mark_123521
wrote:

> I just called tsubaki (http://www.ustsubaki.com/).
> They make chain.
> The sales person set me up with a part number C2060h k1 2l rb.
> It is 2060, double pitch, with an attachment every other link.
> Is that the right stuff?
> His list price was $47 per foot !!
>
> WHAT???
>
> Mark
>
> On Dec 22, 5:51 pm, Ben Holko  wrote:
> > the stuff I bought from there was perfect, same quality as any local
> chain I have ever seen.
> >
> > 
> > From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on
> behalf of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> > Sent: Wednesday, December 23, 2009 10:32 AM
> > To: rctankcombat@googlegroups.com
> > Subject: Re: [TANKS] 2060 Attachment Chain Search
> >
> > In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time,
> b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
> >
> > shipping will cost a bit, but depending on how much you buy you can save
> a lot, the chain is cheap. From memory I paid about USD$2 per foot for #50
> attachment chain.
> >
> > Ben
> >
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

Re: [TANKS] Re: 2060 Attachment Chain Search

[wsmontg5]

 I might have some more for sale at those prices.

Will

 

 

-Original Message-
From: Mark_123521 
To: R/C Tank Combat 
Sent: Mon, Dec 28, 2009 3:34 pm
Subject: [TANKS] Re: 2060 Attachment Chain Search


I just called tsubaki (http://www.ustsubaki.com/).
They make chain.
The sales person set me up with a part number C2060h k1 2l rb.
It is 2060, double pitch, with an attachment every other link.
Is that the right stuff?
His list price was $47 per foot !!

WHAT???

Mark

On Dec 22, 5:51 pm, Ben Holko  wrote:
> the stuff I bought from there was perfect, same quality as any local chain I 
have ever seen.
>
> 
> From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on behalf 
of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> Sent: Wednesday, December 23, 2009 10:32 AM
> To: rctankcombat@googlegroups.com
> Subject: Re: [TANKS] 2060 Attachment Chain Search
>
> In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time, 
b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
>
> shipping will cost a bit, but depending on how much you buy you can save a 
lot, the chain is cheap. From memory I paid about USD$2 per foot for #50 
attachment chain.
>
> Ben
> at this point even if it was a unbeatable price, with the stuff that's been 
coming from China, i'd be a bit leery to buy from them
>
> Chris,
> Odyssey Slipways<http://hometown.aol.com/odysseyslipways/index.html>
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group athttp://groups.google.com/group/rctankcombat

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

 

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

[TANKS] Re: 2060 Attachment Chain Search

[Mark_123521]

I just called tsubaki (http://www.ustsubaki.com/).
They make chain.
The sales person set me up with a part number C2060h k1 2l rb.
It is 2060, double pitch, with an attachment every other link.
Is that the right stuff?
His list price was $47 per foot !!

WHAT???

Mark

On Dec 22, 5:51 pm, Ben Holko  wrote:
> the stuff I bought from there was perfect, same quality as any local chain I 
> have ever seen.
>
> 
> From: rctankcombat@googlegroups.com [rctankcom...@googlegroups.com] on behalf 
> of odysseyslipw...@aol.com [odysseyslipw...@aol.com]
> Sent: Wednesday, December 23, 2009 10:32 AM
> To: rctankcombat@googlegroups.com
> Subject: Re: [TANKS] 2060 Attachment Chain Search
>
> In a message dated 12/22/2009 4:40:07 P.M. Eastern Standard Time, 
> b...@holnet.net writes:http://www.mccchain.com.tw/english/1.htm
>
> shipping will cost a bit, but depending on how much you buy you can save a 
> lot, the chain is cheap. From memory I paid about USD$2 per foot for #50 
> attachment chain.
>
> Ben
> at this point even if it was a unbeatable price, with the stuff that's been 
> coming from China, i'd be a bit leery to buy from them
>
> Chris,
> Odyssey Slipways
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
> Visit the group athttp://groups.google.com/group/rctankcombat

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat