Re: [RE-wrenches] Corrugated Roof Brackets

[Max Balchowsky]

we've installed hundreds of these and use rubber grommets  Max Balchowsky
Design Engineer
Golden Bridge Development
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810"Building a Better Future For The Next Generation"

  From: jay peltz 
 To: RE-wrenches  
 Sent: Thursday, March 5, 2015 2:40 PM
 Subject: Re: [RE-wrenches] Corrugated Roof Brackets
   
Hi Mark,
I'm curious how you seal the hole.
thanks
jay
peltz power



On Mar 5, 2015, at 9:46 AM, Mark Westbrock  
wrote:

We like the SnapNrack corrugated roof blocks.  They are simple, effective, and 
not too expensive (I think around $3.50 each).  The only trick is that you need 
access to the roofing members because you will need to add blocking or sister 
up trusses so that you have a structural member directly below a corrugation 
peak.
Mark Westbrock
Branch Manager & Employee-OwnerNM EE98J Journeyman Electrician
NABCEP Certified PV Installation ProfessionalNABCEP Certified PV Technical Sales

Positive Energy, Inc.
510 S. Main St.Las Cruces, NM 88001
office: 575-524-2030
cell: 575-640-2432
m...@positiveenergysolar.com
www.positiveenergysolar.com
        

On Thu, Mar 5, 2015 at 9:00 AM, AE Solar  wrote:

Hey Wrenchers,Anyone have feedback or preferences on mounting systems for 
corrugated roofs? I'm looking at the S-5! CorruBracket. Its for a very small 
system on a hunting cabin. The pitch is probably about 20 degrees and and I'm 
concerned about leaks over time. Any recommendations are appreciated. ThanksAdam
Adam Katzman
Autonomous Energies
4872 State Route 9G 
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468


___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org




___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org




___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



  ___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

[jay peltz]

Hi Mark,

I'm curious how you seal the hole.

thanks

jay

peltz power


On Mar 5, 2015, at 9:46 AM, Mark Westbrock  
wrote:

> We like the SnapNrack corrugated roof blocks.  They are simple, effective, 
> and not too expensive (I think around $3.50 each).  The only trick is that 
> you need access to the roofing members because you will need to add blocking 
> or sister up trusses so that you have a structural member directly below a 
> corrugation peak.
> 
> Mark Westbrock
> Branch Manager & Employee-Owner
> NM EE98J Journeyman Electrician
> NABCEP Certified PV Installation Professional
> NABCEP Certified PV Technical Sales
> 
> Positive Energy, Inc.
> 510 S. Main St.
> Las Cruces, NM 88001
> office: 575-524-2030
> cell: 575-640-2432
> m...@positiveenergysolar.com
> www.positiveenergysolar.com
> 
> 
> 
> On Thu, Mar 5, 2015 at 9:00 AM, AE Solar  wrote:
> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated roofs? 
> I'm looking at the S-5! CorruBracket. Its for a very small system on a 
> hunting cabin. The pitch is probably about 20 degrees and and I'm concerned 
> about leaks over time. Any recommendations are appreciated. Thanks
> Adam
> 
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G 
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
> 
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] adjustable cordless impact drivers

[Chris Mason]

Here's a new product from S5 that seems to meet this requirement.
http://www.s-5.com/clamps/assemblytools/index_5221.cfm


On Sat, Aug 4, 2012 at 3:56 PM, jay peltz  wrote:

> Hi All,
>
> Has anyone found a adjustable impact or drill that can be torque set?
>
> IE for installing racking/ modules?
>
> thanks,
>
> jay
>
> peltz power
> ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>


-- 
Chris Mason
NABCEP Certified Solar PV Installer™
Solar Design Engineer
Generac Generators Industrial technician

www.cometsolar.com 
264.235.5670
869.662.5670
Skype: netconcepts
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

[Mark Westbrock]

We like the SnapNrack corrugated roof blocks
.  They are
simple, effective, and not too expensive (I think around $3.50 each).  The
only trick is that you need access to the roofing members because you will
need to add blocking or sister up trusses so that you have a structural
member directly below a corrugation peak.

*Mark Westbrock*
Branch Manager & Employee-Owner
NM EE98J Journeyman Electrician
NABCEP Certified PV Installation Professional
NABCEP Certified PV Technical Sales

Positive Energy, Inc.
510 S. Main St.
Las Cruces, NM 88001
office: 575-524-2030
cell: 575-640-2432
m...@positiveenergysolar.com 
www.positiveenergysolar.com



On Thu, Mar 5, 2015 at 9:00 AM, AE Solar 
wrote:

> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
> . Its for a very small system
> on a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> Adam
>
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

[Jason Szumlanski]

I've tried the Versabracket, which uses a similar sealing method, with
great results. I can't speak for the Corrubracket specifically.

Jason Szumlanski


On Thu, Mar 5, 2015 at 11:00 AM, AE Solar 
wrote:

> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
> . Its for a very small system
> on a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> Adam
>
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>

-- 
*Florida Solar Design Group is not an engineering or architectural firm and 
acts only as a consultant and authorized independent sales agent. Any 
advice or work product provided shall not be considered licensed 
professional services provided under Florida Statute Chapters 471, 481, or 
491.*
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

[Marco Mangelsdorf]

Our S-5! friends have come up with a new bracket for sinusoidal, corrugated
roofs with the penetration points being ON TOP of the ridges and not in the
valleys, which is a more bettah design (as we say here in Hawaii). S-5! is
only now supplying them to their distributor chain, so you may want to
contact S-5! directly to get them.  They're in the ~ $10/piece (ouch!)
range.

 

marco

 

From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of AE Solar
Sent: Thursday, March 05, 2015 6:01 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Roof Brackets

 

Hey Wrenchers,

Anyone have feedback or preferences on mounting systems for corrugated
roofs? I'm looking at the S-5! CorruBracket
 . Its for a very small system on
a hunting cabin. The pitch is probably about 20 degrees and and I'm
concerned about leaks over time. Any recommendations are appreciated. Thanks

Adam




Adam Katzman
Autonomous Energies
4872 State Route 9G 
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2250 / Virus Database: 4257/8730 - Release Date: 03/05/15

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Corrugated Roof Brackets

[Jerry Shafer]

Also look at Sunmodo they have some nice brackets and are state side
Jerry
On Mar 5, 2015 6:00 AM, "AE Solar"  wrote:

> Hey Wrenchers,
> Anyone have feedback or preferences on mounting systems for corrugated
> roofs? I'm looking at the S-5! CorruBracket
> . Its for a very small system
> on a hunting cabin. The pitch is probably about 20 degrees and and I'm
> concerned about leaks over time. Any recommendations are appreciated. Thanks
> Adam
>
> Adam Katzman
> Autonomous Energies
> 4872 State Route 9G
> Germantown NY, 12526
> www.autonomousenergies.com
> (518) 567-1468
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

[RE-wrenches] Corrugated Roof Brackets

[AE Solar]

Hey Wrenchers,
Anyone have feedback or preferences on mounting systems for corrugated
roofs? I'm looking at the S-5! CorruBracket
. Its for a very small system on
a hunting cabin. The pitch is probably about 20 degrees and and I'm
concerned about leaks over time. Any recommendations are appreciated. Thanks
Adam

Adam Katzman
Autonomous Energies
4872 State Route 9G
Germantown NY, 12526
www.autonomousenergies.com
(518) 567-1468
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org