Re: [RE-wrenches] Aluminum Roof shingles flashing

[benn kilburn]

James, 
Can you better describe the aluminum shingles?  Are they flat, or curved,
or…? 

I'm looking at a project that is using these…metrotile_roman.cfm

Conergy is recommending their roman tile roof hook that mounts to the roof
deck and curves out from under the shingle/tile for attaching the rails.
Although Conergy's install manual states that these can be installed with
the shingle/tiles already in place, the roofers I spoke with recommended
installing the hooks while they are installing the shingles, so as to not
damage the shingles by lifting them up and back to gain access to attach the
roof hook to the roof.  I prefer this approach since it would be the first
time working on this roof material.

Apparently these shingles cannot withstand a lot of weight without suffering
damage, so it may be best to use a manlift.
Hope this helps,
Benn

DayStar Renewable Energy Inc.
www.daystarsolar.ca
780-906-7807 
Certified Construction Electrician Solar Photovoltaic Systems Certified
Certificate # 0007S
HAVE A SUNNY DAY

On 02/07/12 5:07 PM, "James Reismiller"  wrote:

HI All,
   I’m bidding a job that has an existing aluminum shingle roof.  I’m
wondering how to properly flash the penetrations, and what to use for
standoffs.  We typically use Unirac 2-piece aluminum standoffs with Oatey
no-calks on a comp roof.  We have used S5 VB-47’s for face-fastened metal
roofs, but never encountered aluminum shingles yet.  Ideas?
 
Regards,
James Reismiller
NABCEP Certified Solar PV Installer®
Abundant Solar
541-231-8772
CCB#175919
www.abundantsolar.com 
 
”I’d put my money on the sun and solar energy. What a source of power! I
hope we don’t have to wait until oil and coal run out before we tackle
that.”-Thomas Edison
 
___ List sponsored by Home Power
magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List
rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant
bios: www.members.re-wrenches.org

<>___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

[RE-wrenches] Aluminum Roof shingles flashing

[James Reismiller]

HI All,

   I’m bidding a job that has an existing aluminum shingle roof.  I’m
wondering how to properly flash the penetrations, and what to use for
standoffs.  We typically use Unirac 2-piece aluminum standoffs with Oatey
no-calks on a comp roof.  We have used S5 VB-47’s for face-fastened metal
roofs, but never encountered aluminum shingles yet.  Ideas?

 

Regards,

James Reismiller

NABCEP Certified Solar PV Installer®

Abundant Solar

541-231-8772

CCB#175919

Logo2007-for-outlook

www.abundantsolar.com 


 

”I’d put my money on the sun and solar energy. What a source of power! I
hope we don’t have to wait until oil and coal run out before we tackle
that.”-Thomas Edison

 

<>___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org