Re: [RE-wrenches] GT inverter for SWWP turbine

2022-08-15 Thread Kirk Herander via RE-wrenches 
The Skybox,
I only have one installed, AC-coupled with a Solaredge 5kw inverter, it's
been working fine for 9 mos, fingers crossed. But obviously I'm not using
many of its touted features. Probably I'm dodging a bullet for that reason.

On Fri, Aug 12, 2022 at 12:52 PM Nick A Lucchese via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:

> Interesting timing on this Skybox subject. Over the last few weeks I’ve
> been getting requests for help from a local individual that has been
> experiencing a lot of problems with his integration of Skyboxes and a
> Fortress Evault. I am too overwhelmed with my own work to jump right in but
> still trying to help him out in a limited manner as I feel bad for his
> situation. Sounds like the two main issues he’s experiencing are lack of
> success updating firmware in the Skyboxes and related miscommunication with
> SOC between the components and the charge being terminated once the
> batteries only reach 30% SOC.
>
> Is it worth the effort of believing once a successful firmware update is
> completed that the associated problems will be remedied or would those of
> you experiencing Skybox problems recommend swapping out the inverters
> before any additional labor expenses are wasted? Seems like he is willing
> to go for the latter but I’d rather not doom a decent product to e-waste if
> it’s not necessary. I always avoided the Skybox myself due to their high
> idle consumption so other than an afternoon training I have no experience
> with this particular Outback offering.
>
> Enjoy your weekend, Nick
>
>
>
> On Aug 11, 2022, at 9:47 AM, Rich Nicol via RE-wrenches <
> re-wrenches@lists.re-wrenches.org> wrote:
>
>
> Same disastrous experience here as well with the Skyboxes.
> We installed three – I now own them as I replaced them at my expense with
> another competing product.
> Worse solar product I dealt with in the last 15 years.
>
>
> *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org
> ] *On Behalf Of *Eric Smiley
> via RE-wrenches
> *Sent:* Thursday, August 11, 2022 12:40 PM
> *To:* RE-wrenches
> *Cc:* Eric Smiley
> *Subject:* Re: [RE-wrenches] GT inverter for SWWP turbine
>
> Skybox is discontinued and tech support is limited. There are still
> significant software issues with them that make them unreliable for battery
> back-up. We are in the process of replacing the 3 Skyboxes we wish we had
> never installed.
>
> <~WRD000.jpg>
>
> *Eric Smiley,* Project Manager
> e...@vecoop.ca
> T: 250.703.6004 <+12507036004>
> T: 888.386.0116 <+18883860116>
> *VIRIDIANENERGY.CA <https://viridianenergy.ca/>*
>
> *<~WRD000.jpg> <https://viridianenergy.ca/>*
>
>
> On Wed, 10 Aug 2022 at 20:00, Maverick Brown via RE-wrenches <
> re-wrenches@lists.re-wrenches.org> wrote:
>
> Jay
>
> Have you (or any Wrench willing to share) installed SkyBox? If so, can you
> share your experience good or bad?
>
> Can you compare it to Sol-Ark? I’ve installed a half-dozen Sol-Arks but no
> SkyBox yet. I think I have a customer where SkyBox would be a good fit, but
> not enough personal data.
> Thanks in advance.
>
>
> Maverick Brown
> Off-Grid Solar Commander since 2006
> *Maverick Solar Enterprises, Inc.*
> * • Solar Commander Remote Power*
>
> * • SunFlow Systems Cathodic Protection *maver...@mavericksolar.com
> 512-460-9825
>
>
>
>
> ___
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>

-- 

*Kirk Herander / **kirkh@vermont.solar *

*Owner|Principal, VT Solar, LLC*

*Celebrating our 31st Anniversary 1991-2022!!*

*www.vermont.solar*
<https://nam02.safelinks.protection.outlook.com/?url=www.vermontsolarnow.com&data=02%7C01%7C%7C9f0330d75a244870112408d685311841%7C84df9e7fe9f640afb435%7C1%7C0%7C636842843233477645&sdata=0NjyuKeQbEK6245SNnk8X4XnP9Q%2B%2BqtvcALkdDghvk4%3D&reserved=0>

dba Vermont Solar Engineering

802.863.1202
___
List sponsored by Redwood Alliance

Pay optional member due

Re: [RE-wrenches] GT inverter for SWWP turbine

2022-08-12 Thread Nick A Lucchese via RE-wrenches 
Interesting timing on this Skybox subject. Over the last few weeks I’ve been 
getting requests for help from a local individual that has been experiencing a 
lot of problems with his integration of Skyboxes and a Fortress Evault. I am 
too overwhelmed with my own work to jump right in but still trying to help him 
out in a limited manner as I feel bad for his situation. Sounds like the two 
main issues he’s experiencing are lack of success updating firmware in the 
Skyboxes and related miscommunication with SOC between the components and the 
charge being terminated once the batteries only reach 30% SOC.

Is it worth the effort of believing once a successful firmware update is 
completed that the associated problems will be remedied or would those of you 
experiencing Skybox problems recommend swapping out the inverters before any 
additional labor expenses are wasted? Seems like he is willing to go for the 
latter but I’d rather not doom a decent product to e-waste if it’s not 
necessary. I always avoided the Skybox myself due to their high idle 
consumption so other than an afternoon training I have no experience with this 
particular Outback offering.

Enjoy your weekend, Nick



> On Aug 11, 2022, at 9:47 AM, Rich Nicol via RE-wrenches 
>  wrote:
> 
>  
> Same disastrous experience here as well with the Skyboxes.
> We installed three – I now own them as I replaced them at my expense with 
> another competing product.
> Worse solar product I dealt with in the last 15 years.
>  
>  
> From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org 
> <mailto:re-wrenches-boun...@lists.re-wrenches.org>] On Behalf Of Eric Smiley 
> via RE-wrenches
> Sent: Thursday, August 11, 2022 12:40 PM
> To: RE-wrenches
> Cc: Eric Smiley
> Subject: Re: [RE-wrenches] GT inverter for SWWP turbine
>  
> Skybox is discontinued and tech support is limited. There are still 
> significant software issues with them that make them unreliable for battery 
> back-up. We are in the process of replacing the 3 Skyboxes we wish we had 
> never installed.
> <~WRD000.jpg>
> 
> Eric Smiley, Project Manager
> e...@vecoop.ca <mailto:e...@vecoop.ca>
> T: 250.703.6004 
> T: 888.386.0116 
> VIRIDIANENERGY.CA <https://viridianenergy.ca/>
> <~WRD000.jpg> <https://viridianenergy.ca/>
>  
>  
> On Wed, 10 Aug 2022 at 20:00, Maverick Brown via RE-wrenches 
>  <mailto:re-wrenches@lists.re-wrenches.org>> wrote:
>> Jay
>>  
>> Have you (or any Wrench willing to share) installed SkyBox? If so, can you 
>> share your experience good or bad? 
>>  
>> Can you compare it to Sol-Ark? I’ve installed a half-dozen Sol-Arks but no 
>> SkyBox yet. I think I have a customer where SkyBox would be a good fit, but 
>> not enough personal data.  
>> Thanks in advance. 
>>  
>>  
>> Maverick Brown
>> Off-Grid Solar Commander since 2006
>> Maverick Solar Enterprises, Inc.
>>  • Solar Commander Remote Power
>>  • SunFlow Systems Cathodic Protection 
>> maver...@mavericksolar.com <mailto:maver...@mavericksolar.com>
>> 512-460-9825
>>  
>> 
>> 

___
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter for SWWP turbine

2022-08-11 Thread Rich Nicol via RE-wrenches 
 

Same disastrous experience here as well with the Skyboxes.

We installed three – I now own them as I replaced them at my expense with 
another competing product.

Worse solar product I dealt with in the last 15 years.

 

 

From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf 
Of Eric Smiley via RE-wrenches
Sent: Thursday, August 11, 2022 12:40 PM
To: RE-wrenches
Cc: Eric Smiley
Subject: Re: [RE-wrenches] GT inverter for SWWP turbine

 

Skybox is discontinued and tech support is limited. There are still significant 
software issues with them that make them unreliable for battery back-up. We are 
in the process of replacing the 3 Skyboxes we wish we had never installed.


Image removed by sender.

Eric Smiley, Project Manager
 <mailto:e...@vecoop.ca> e...@vecoop.ca
  T: 250.703.6004
  T: 888.386.0116
 <https://viridianenergy.ca/> VIRIDIANENERGY.CA

 <https://viridianenergy.ca/> Image removed by sender.

 

 

On Wed, 10 Aug 2022 at 20:00, Maverick Brown via RE-wrenches 
 wrote:

Jay

 

Have you (or any Wrench willing to share) installed SkyBox? If so, can you 
share your experience good or bad? 

 

Can you compare it to Sol-Ark? I’ve installed a half-dozen Sol-Arks but no 
SkyBox yet. I think I have a customer where SkyBox would be a good fit, but not 
enough personal data.  

Thanks in advance. 

 

 

Maverick Brown
Off-Grid Solar Commander since 2006
Maverick Solar Enterprises, Inc.

 • Solar Commander Remote Power

 • SunFlow Systems Cathodic Protection 
maver...@mavericksolar.com
512-460-9825

 





On Jun 28, 2022, at 6:26 PM, Jay via RE-wrenches 
 wrote:

Hi Jeremy,

Sol ark and Outback skybox. 
Might be others. 

It might be tricky dealing with the wind machine w/o batteries. 

Jay




On Jun 28, 2022, at 4:12 PM, Jeremy Coxon via RE-wrenches 
 wrote:

 

We have a customer who has a legacy off grid system which includes a SWWP 
whisper 200.  They now have utility power to the property and so they want to 
go straight grid tie and ditch the batteries and off grid system (even though 
it’s all in perfect working order).  Anyone know of an inverter that we could 
use to accomplish this goal?

 

Jeremy Coxon NABCEP 

Certified MWBE

 

Sent from my iPhone

___

List sponsored by Redwood Alliance

 

Pay optional member dues here: http://re-wrenches.org

 

List Address: RE-wrenches@lists.re-wrenches.org

 

Change listserver email address & settings:

http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

 

There are two list archives for searching. When one doesn't work, try the other:

https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/

http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

 

List rules & etiquette:

http://www.re-wrenches.org/etiquette.htm

 

Check out or update participant bios:

http://www.members.re-wrenches.org

 

___
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

___
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

___
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter for SWWP turbine

2022-08-11 Thread Eric Smiley via RE-wrenches 
Skybox is discontinued and tech support is limited. There are still
significant software issues with them that make them unreliable for battery
back-up. We are in the process of replacing the 3 Skyboxes we wish we had
never installed.


*Eric Smiley,* Project Manager
e...@vecoop.ca
T: 250.703.6004 <+12507036004>
T: 888.386.0116 <+18883860116>
*VIRIDIANENERGY.CA *

* *


On Wed, 10 Aug 2022 at 20:00, Maverick Brown via RE-wrenches <
re-wrenches@lists.re-wrenches.org> wrote:

> Jay
>
> Have you (or any Wrench willing to share) installed SkyBox? If so, can you
> share your experience good or bad?
>
> Can you compare it to Sol-Ark? I’ve installed a half-dozen Sol-Arks but no
> SkyBox yet. I think I have a customer where SkyBox would be a good fit, but
> not enough personal data.
> Thanks in advance.
>
>
> Maverick Brown
> Off-Grid Solar Commander since 2006
> *Maverick Solar Enterprises, Inc.*
> * • Solar Commander Remote Power*
>
> * • SunFlow Systems Cathodic Protection *maver...@mavericksolar.com
> 512-460-9825
>
>
> On Jun 28, 2022, at 6:26 PM, Jay via RE-wrenches <
> re-wrenches@lists.re-wrenches.org> wrote:
>
> Hi Jeremy,
>
> Sol ark and Outback skybox.
> Might be others.
>
> It might be tricky dealing with the wind machine w/o batteries.
>
> Jay
>
> On Jun 28, 2022, at 4:12 PM, Jeremy Coxon via RE-wrenches <
> re-wrenches@lists.re-wrenches.org> wrote:
>
>
> We have a customer who has a legacy off grid system which includes a SWWP
> whisper 200.  They now have utility power to the property and so they want
> to go straight grid tie and ditch the batteries and off grid system (even
> though it’s all in perfect working order).  Anyone know of an inverter that
> we could use to accomplish this goal?
>
>
> Jeremy Coxon NABCEP
>
> Certified MWBE
>
>
> Sent from my iPhone
>
> ___
>
> List sponsored by Redwood Alliance
>
>
> Pay optional member dues here: http://re-wrenches.org
>
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
>
> Change listserver email address & settings:
>
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>
> There are two list archives for searching. When one doesn't work, try the
> other:
>
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>
> List rules & etiquette:
>
> http://www.re-wrenches.org/etiquette.htm
>
>
> Check out or update participant bios:
>
> http://www.members.re-wrenches.org
>
>
> ___
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
> ___
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
___
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter for SWWP turbine

2022-08-10 Thread Maverick Brown via RE-wrenches 
Jay

Have you (or any Wrench willing to share) installed SkyBox? If so, can you 
share your experience good or bad? 

Can you compare it to Sol-Ark? I’ve installed a half-dozen Sol-Arks but no 
SkyBox yet. I think I have a customer where SkyBox would be a good fit, but not 
enough personal data.  
Thanks in advance. 


Maverick Brown
Off-Grid Solar Commander since 2006
Maverick Solar Enterprises, Inc.
 • Solar Commander Remote Power
 • SunFlow Systems Cathodic Protection 
maver...@mavericksolar.com
512-460-9825


> On Jun 28, 2022, at 6:26 PM, Jay via RE-wrenches 
>  wrote:
> 
> Hi Jeremy,
> 
> Sol ark and Outback skybox. 
> Might be others. 
> 
> It might be tricky dealing with the wind machine w/o batteries. 
> 
> Jay
> 
>> On Jun 28, 2022, at 4:12 PM, Jeremy Coxon via RE-wrenches 
>>  wrote:
>> 
>> We have a customer who has a legacy off grid system which includes a SWWP 
>> whisper 200.  They now have utility power to the property and so they want 
>> to go straight grid tie and ditch the batteries and off grid system (even 
>> though it’s all in perfect working order).  Anyone know of an inverter that 
>> we could use to accomplish this goal?
>> 
>> Jeremy Coxon NABCEP 
>> Certified MWBE
>> 
>> Sent from my iPhone
>> ___
>> List sponsored by Redwood Alliance
>> 
>> Pay optional member dues here: http://re-wrenches.org
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> There are two list archives for searching. When one doesn't work, try the 
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>> 
> ___
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
___
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter for SWWP turbine

2022-06-28 Thread Jay via RE-wrenches 
Hi Jeremy,

Sol ark and Outback skybox. 
Might be others. 

It might be tricky dealing with the wind machine w/o batteries. 

Jay

> On Jun 28, 2022, at 4:12 PM, Jeremy Coxon via RE-wrenches 
>  wrote:
> 
> We have a customer who has a legacy off grid system which includes a SWWP 
> whisper 200.  They now have utility power to the property and so they want to 
> go straight grid tie and ditch the batteries and off grid system (even though 
> it’s all in perfect working order).  Anyone know of an inverter that we could 
> use to accomplish this goal?
> 
> Jeremy Coxon NABCEP 
> Certified MWBE
> 
> Sent from my iPhone
> ___
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
___
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-21 Thread Brian Teitelbaum 
Jay,

If you use the Aurora 6000, it has two separate MPPT channels, and each channel 
has dual input lugs, so you could have up to four PV strings without any needed 
fusing (two strings per channel).

On the 6000, the max input power per channel is 4kW, so you can't just put two 
strings of 10 modules on one channel (20 x 225W = 4500W), but you could use 
four strings, with, say 16 modules on one channel (two strings of 8 for 3600W ) 
and 14 modules on the other channel (two strings of 7 for 3150W ). The Aurora 
inverters have an adjustable input voltage range that will go all the way down 
to about 90VDC and still power-point track, so strings of 7 are no problem, 
even with regular 60-cell modules. There is some loss of efficiency at the 
lower voltages, but it's minor.

30 of the Sanyo 225's might be a bit high for a 6kW inverter however, so you 
may want to use two smaller Aurora inverters instead of a single 6000. You will 
need to analyze how much clipping you might get at the location, and see if the 
lost wattage is worth the extra cost of using two inverters. Personally, I 
don't think that an array at 6750W on a 6kw inverter will really see all that 
much clipping, unless it's in a cold climate. I doubt that the extra cost of 
using two smaller inverters would be justified.

Brian Teitelbaum
AEE Solar


From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Sunday, November 20, 2011 2:36 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] GT inverter

HI mac,

I like this choice also.

But what is on the market for a TL fused disco?

jay
On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:


I would see if the Aurora 6000 would be a good fit.  I believe it will string 
but it may clip depending on tilt, orientation and anticipated temps.


Mac
On Sun, Nov 20, 2011 at 2:44 PM, jay peltz 
mailto:j...@asis.com>> wrote:
Hi All,

Anybody have  a favorite string GT inverter for the following.

6700 watts
30 x sanyo 225 watt

no shading
240v output

thanks,

jay

peltz power





___
List sponsored by Home Power magazine

List Address: 
RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org>

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org/>



--



Mac Lewis

"Yo solo sé que no sé nada." -Sócrates

___
List sponsored by Home Power magazine

List Address: 
RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org>

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-21 Thread Glenn Burt 
SMA makes a fused combiner specifically for their TL line of inverters as well.

 

-Glenn

 

From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Monday, November 21, 2011 11:07 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] GT inverter

 

Hi Brian,

 

I just found on Midnite's  site a brand new set of combiners that do the job, 
very cool, can be configured in multiple ways!

 

For the size I was looking at it would need 3 strings, ( 5+ amps per string, 15 
 series fused rating)

So as I understand it, I've got to install fusing, which means that I'd need 2 
of those expensive discos.

 

So usual that the manufactures are not providing the equipment to do the 
install. 

 

I have to say, given the confusion for this hook up, I might opt for the tried 
and true sma.

 

Thanks all for your imput.

 

Jay

 

Peltz power

 

 

 

 

 


Sent from my iPad


On Nov 21, 2011, at 7:10 AM, Brian Mehalic  wrote:

Hey Jay-

Schneider/Square D does make a fusible, 4-pole, 30 A, 600 Vdc disco, allowing 
you to fuse and double-break both the positive and negative, but I have a 
feeling it is quite pricey.  Should be model number H461x, depending on the 
NEMA category you require.

Brian

 

On Sun, Nov 20, 2011 at 5:36 PM, jay peltz  wrote:

HI mac,

 

I like this choice also.

 

But what is on the market for a TL fused disco?

 

jay

On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:





I would see if the Aurora 6000 would be a good fit.  I believe it will string 
but it may clip depending on tilt, orientation and anticipated temps.

 

 

Mac

On Sun, Nov 20, 2011 at 2:44 PM, jay peltz  wrote:

Hi All,

Anybody have  a favorite string GT inverter for the following.

6700 watts
30 x sanyo 225 watt

no shading
240v output

thanks,

jay

peltz power





___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/> 





 

-- 

 

 

 

Mac Lewis

"Yo solo sé que no sé nada." -Sócrates

 

___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

 


___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org







 

-- 



Brian Mehalic 
NABCEP Certified Solar PV Installer™ R031508-59

IREC ISPQ Certified Affiliated Instructor/PV US-0132

PV Curriculum Developer and Instructor

Solar Energy International
Carbondale, CO 81623
http://www.solarenergy.org

 

___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-21 Thread jay peltz 
Hi Brian,

I just found on Midnite's  site a brand new set of combiners that do the job, 
very cool, can be configured in multiple ways!

For the size I was looking at it would need 3 strings, ( 5+ amps per string, 15 
 series fused rating)
So as I understand it, I've got to install fusing, which means that I'd need 2 
of those expensive discos.

So usual that the manufactures are not providing the equipment to do the 
install. 

I have to say, given the confusion for this hook up, I might opt for the tried 
and true sma.

Thanks all for your imput.

Jay

Peltz power






Sent from my iPad

On Nov 21, 2011, at 7:10 AM, Brian Mehalic  wrote:

> Hey Jay-
> Schneider/Square D does make a fusible, 4-pole, 30 A, 600 Vdc disco, allowing 
> you to fuse and double-break both the positive and negative, but I have a 
> feeling it is quite pricey.  Should be model number H461x, depending on the 
> NEMA category you require.
> Brian
> 
> 
> On Sun, Nov 20, 2011 at 5:36 PM, jay peltz  wrote:
> HI mac,
> 
> I like this choice also.
> 
> But what is on the market for a TL fused disco?
> 
> jay
> On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:
> 
>> I would see if the Aurora 6000 would be a good fit.  I believe it will 
>> string but it may clip depending on tilt, orientation and anticipated temps.
>> 
>> 
>> Mac
>> 
>> On Sun, Nov 20, 2011 at 2:44 PM, jay peltz  wrote:
>> Hi All,
>> 
>> Anybody have  a favorite string GT inverter for the following.
>> 
>> 6700 watts
>> 30 x sanyo 225 watt
>> 
>> no shading
>> 240v output
>> 
>> thanks,
>> 
>> jay
>> 
>> peltz power
>> 
>> 
>> 
>> 
>> 
>> ___
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
>> 
>> 
>> 
>> -- 
>> 
>> 
>> 
>> Mac Lewis
>> 
>> "Yo solo sé que no sé nada." -Sócrates
>> 
>> 
>> ___
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
> 
> 
> ___
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> 
> 
> -- 
> 
> Brian Mehalic 
> NABCEP Certified Solar PV Installer™ R031508-59
> IREC ISPQ Certified Affiliated Instructor/PV US-0132
> PV Curriculum Developer and Instructor
> Solar Energy International
> Carbondale, CO 81623
> http://www.solarenergy.org
> 
> ___
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-21 Thread Brian Mehalic 
Right! Double-break terminology confusion on my part...I meant use the
four-pole switch for two separate circuits (and break the positive and
negative of each) to take advantage of the two MPPTs if need be.
Brian

On Mon, Nov 21, 2011 at 10:10 AM, Brian Mehalic wrote:

> Hey Jay-
> Schneider/Square D does make a fusible, 4-pole, 30 A, 600 Vdc disco,
> allowing you to fuse and double-break both the positive and negative, but I
> have a feeling it is quite pricey.  Should be model number H461x, depending
> on the NEMA category you require.
> Brian
>
>
> On Sun, Nov 20, 2011 at 5:36 PM, jay peltz  wrote:
>
>> HI mac,
>>
>> I like this choice also.
>>
>> But what is on the market for a TL fused disco?
>>
>> jay
>> On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:
>>
>> I would see if the Aurora 6000 would be a good fit.  I believe it will
>> string but it may clip depending on tilt, orientation and anticipated temps.
>>
>>
>> Mac
>>
>> On Sun, Nov 20, 2011 at 2:44 PM, jay peltz  wrote:
>>
>>> Hi All,
>>>
>>> Anybody have  a favorite string GT inverter for the following.
>>>
>>> 6700 watts
>>> 30 x sanyo 225 watt
>>>
>>> no shading
>>> 240v output
>>>
>>> thanks,
>>>
>>> jay
>>>
>>> peltz power
>>>
>>>
>>>
>>>
>>>
>>> ___
>>> List sponsored by Home Power magazine
>>>
>>> List Address: RE-wrenches@lists.re-wrenches.org
>>>
>>> Options & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive:
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out participant bios:
>>> www.members.re-wrenches.org
>>>
>>>
>>
>>
>> --
>>
>>
>>
>> Mac Lewis
>>
>> *
>>
>> "Yo solo sé que no sé nada." -Sócrates
>> *
>>  ___
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
>> ___
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
>
>
> --
> 
> Brian Mehalic
> NABCEP Certified Solar PV Installer™ R031508-59
> IREC ISPQ Certified Affiliated Instructor/PV US-0132
> PV Curriculum Developer and Instructor
> Solar Energy International
> Carbondale, CO 81623
> http://www.solarenergy.org
>
>


-- 

Brian Mehalic
NABCEP Certified Solar PV Installer™ R031508-59
IREC ISPQ Certified Affiliated Instructor/PV US-0132
PV Curriculum Developer and Instructor
Solar Energy International
Carbondale, CO 81623
http://www.solarenergy.org
___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-21 Thread Dave Click 
The Square D switches would work (as would others, I'm sure, but I knew 
how to find this file). And you don't need to break each pole twice:

http://static.schneider-electric.us/docs/Electrical%20Distribution/Safety%20Switches/Solar%20Disconnect%20Switches/3110DB0401.pdf

Note wiring diagrams 1A, 1C, and 1E.

On 2011/11/21 9:49, mac Lewis wrote:

Jay,

I'm not sure as far as external disconnects.  In the handful that we
have installed, we have been able to use the integrated disconnects.
  Could you use a standard DC double-pole double-throw and run the + and
- through each pole?



On Sun, Nov 20, 2011 at 3:36 PM, jay peltz mailto:j...@asis.com>> wrote:

HI mac,

I like this choice also.

But what is on the market for a TL fused disco?

jay
On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:


I would see if the Aurora 6000 would be a good fit.  I believe it
will string but it may clip depending on tilt, orientation and
anticipated temps.


Mac

On Sun, Nov 20, 2011 at 2:44 PM, jay peltz mailto:j...@asis.com>> wrote:

Hi All,

Anybody have  a favorite string GT inverter for the following.

6700 watts
30 x sanyo 225 watt

no shading
240v output

thanks,

jay

peltz power





___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org


Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm


Check out participant bios:
www.members.re-wrenches.org 




--



Mac Lewis

*

"Yo solo sé que no sé nada." -Sócrates

*
___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org


Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm


Check out participant bios:
www.members.re-wrenches.org 




___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org


Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm


Check out participant bios:
www.members.re-wrenches.org 





--



Mac Lewis

*

"Yo solo sé que no sé nada." -Sócrates

*


___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options&  settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules&  etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-21 Thread Brian Mehalic 
Hey Jay-
Schneider/Square D does make a fusible, 4-pole, 30 A, 600 Vdc disco,
allowing you to fuse and double-break both the positive and negative, but I
have a feeling it is quite pricey.  Should be model number H461x, depending
on the NEMA category you require.
Brian


On Sun, Nov 20, 2011 at 5:36 PM, jay peltz  wrote:

> HI mac,
>
> I like this choice also.
>
> But what is on the market for a TL fused disco?
>
> jay
> On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:
>
> I would see if the Aurora 6000 would be a good fit.  I believe it will
> string but it may clip depending on tilt, orientation and anticipated temps.
>
>
> Mac
>
> On Sun, Nov 20, 2011 at 2:44 PM, jay peltz  wrote:
>
>> Hi All,
>>
>> Anybody have  a favorite string GT inverter for the following.
>>
>> 6700 watts
>> 30 x sanyo 225 watt
>>
>> no shading
>> 240v output
>>
>> thanks,
>>
>> jay
>>
>> peltz power
>>
>>
>>
>>
>>
>> ___
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>
>
> --
>
>
>
> Mac Lewis
>
> *
>
> "Yo solo sé que no sé nada." -Sócrates
> *
>  ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
> ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 

Brian Mehalic
NABCEP Certified Solar PV Installer™ R031508-59
IREC ISPQ Certified Affiliated Instructor/PV US-0132
PV Curriculum Developer and Instructor
Solar Energy International
Carbondale, CO 81623
http://www.solarenergy.org
___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-21 Thread mac Lewis 
Jay,

I'm not sure as far as external disconnects.  In the handful that we have
installed, we have been able to use the integrated disconnects.  Could you
use a standard DC double-pole double-throw and run the + and - through each
pole?



On Sun, Nov 20, 2011 at 3:36 PM, jay peltz  wrote:

> HI mac,
>
> I like this choice also.
>
> But what is on the market for a TL fused disco?
>
> jay
> On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:
>
> I would see if the Aurora 6000 would be a good fit.  I believe it will
> string but it may clip depending on tilt, orientation and anticipated temps.
>
>
> Mac
>
> On Sun, Nov 20, 2011 at 2:44 PM, jay peltz  wrote:
>
>> Hi All,
>>
>> Anybody have  a favorite string GT inverter for the following.
>>
>> 6700 watts
>> 30 x sanyo 225 watt
>>
>> no shading
>> 240v output
>>
>> thanks,
>>
>> jay
>>
>> peltz power
>>
>>
>>
>>
>>
>> ___
>> List sponsored by Home Power magazine
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Options & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out participant bios:
>> www.members.re-wrenches.org
>>
>>
>
>
> --
>
>
>
> Mac Lewis
>
> *
>
> "Yo solo sé que no sé nada." -Sócrates
> *
>  ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
> ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>


-- 



Mac Lewis

*

"Yo solo sé que no sé nada." -Sócrates
*
___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-20 Thread jay peltz 
HI mac,

I like this choice also.

But what is on the market for a TL fused disco?

jay
On Nov 20, 2011, at 1:59 PM, mac Lewis wrote:

> I would see if the Aurora 6000 would be a good fit.  I believe it will string 
> but it may clip depending on tilt, orientation and anticipated temps.
> 
> 
> Mac
> 
> On Sun, Nov 20, 2011 at 2:44 PM, jay peltz  wrote:
> Hi All,
> 
> Anybody have  a favorite string GT inverter for the following.
> 
> 6700 watts
> 30 x sanyo 225 watt
> 
> no shading
> 240v output
> 
> thanks,
> 
> jay
> 
> peltz power
> 
> 
> 
> 
> 
> ___
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> 
> -- 
> 
> 
> 
> Mac Lewis
> 
> "Yo solo sé que no sé nada." -Sócrates
> 
> 
> ___
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] GT inverter

2011-11-20 Thread mac Lewis 
I would see if the Aurora 6000 would be a good fit.  I believe it will
string but it may clip depending on tilt, orientation and anticipated temps.


Mac

On Sun, Nov 20, 2011 at 2:44 PM, jay peltz  wrote:

> Hi All,
>
> Anybody have  a favorite string GT inverter for the following.
>
> 6700 watts
> 30 x sanyo 225 watt
>
> no shading
> 240v output
>
> thanks,
>
> jay
>
> peltz power
>
>
>
>
>
> ___
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>


-- 



Mac Lewis

*

"Yo solo sé que no sé nada." -Sócrates
*
___
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org