Re: [realXtend] Re: Grid setup question
Hi Ryan Taiga 0.1.3 works nicely - but i still have the same issue with the old viewer. I noticed the folowing error message at startup of the region : 10:13:49 - [CABLE BEACH ASSETS]: Failed to locate an IImprovedAssetCache. Storage for local and temporary assets will be disabled Though i get the same message on the region i have on the same server where the grid services run. Grid Service shows the region as connecting successfully Well - i only use the old viewer to build and because i can see into neighbouring regions and enter them without teleport. On Fri, Aug 27, 2010 at 1:08 PM, Peter Steinlechner psteinlech...@gmail.com wrote: Found it :-) On Fri, Aug 27, 2010 at 1:03 PM, Peter Steinlechner psteinlech...@gmail.com wrote: Hi Ryan not yet - atm i am still using Taiga 0.1.2 but im glad to give it a try. Where can I find it ? Cheers :-) On Fri, Aug 27, 2010 at 12:38 PM, Ryan McDougall sempu...@gmail.comwrote: Did you try using the TaigaWizard setup application? Taiga 0.1.3 RC? On Fri, Aug 27, 2010 at 1:30 PM, pedro psteinlech...@gmail.com wrote: I still wonder where i got things wrong in adding a region to a grid that's on a different server? The Region.ini file i use looks like this: [Sandbox] ExternalHostName=165.1.1.1 InternalPort=9001 Location=1004,1000 MasterAvatarFirstName=User MasterAvatarLastName=User MasterAvatarSandboxPassword=user RegionUUID=c114bc50-9d8e-4ba9-b65e-28f7eacc5363 region_name=Sandbox InternalAddress=165.1.1.1 AllowAlternatePorts=False The grid servers entry in the opensim ini point all to the correct IP and ports of the server where all grid services run. On the server where the above mentioned region is located i just start up OpenSim.32BitLaunch.exe When i try to get from a region thats located on the same server where the grid servers run to the sandbox box by using the r0.42 viewer, i get the following messages in the console of the Sandbox server: 12:23:22 - [CONNECTION BEGIN]: Region Sandbox told of incoming child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 1954024387, teleportflag s 16) 12:23:22 - [OGS1 USER SERVICES]: Verifying user session for d7e1567b- ce97-4b0d-a 085-82fe9ae09482 12:23:22 - [CONNECTION BEGIN]: User authentication returned True 12:23:22 - [CONNECTION BEGIN]: Region Sandbox authenticated and authorized incom ing child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 195 4024387) 12:23:22 - [CAPS]: Registered seed capability /CAPS/2eee15b0-e186-40f6- abc1-17ec 6ef41679/ for d7e1567b-ce97-4b0d-a085-82fe9ae09482 12:23:22 - [EVENTQUEUE]: Adding new queue for agent d7e1567b-ce97-4b0d- a085-82fe 9ae09482 in region Sandbox 12:23:22 - [OBJECTADD]: /CAPS/OA/cf0c5b53-0ecc-4b31-aff9-39d978f93803/ 12:23:22 - [GETTEXTURE]: /CAPS/ccd11f07-4121-4816-9c09-98980da9643c 12:23:24 - --- 12:23:24 - uri=/agent/d7e1567b-ce97-4b0d-a085-82fe9ae09482/ 12:23:24 - content-type=application/json 12:23:24 - http-method=PUT 12:23:24 - --- 12:23:54 - --- 12:23:54 - uri=/agent/d7e1567b-ce97-4b0d- a085-82fe9ae09482/1103909674543104/ 12:23:54 - content-type= 12:23:54 - http-method=DELETE 12:23:54 - --- 12:23:54 - [REST COMMS]: Agent Deleted. Region (Sandbox) # Any hint of what i could have got wrong is highly appreciated, the good or better the surprising thing is that the same settings work nicely in naali. Cheers On Aug 19, 9:56 am, pedro psteinlech...@gmail.com wrote: Hi all I tried to setup a grid by using Taiga 0.1.2 server on 2 independent servers Server 1 runs the grid services and 1 region Server 2 only runs 2 regions With naali i can teleport perfectly from server 1 to the 2 regions on server 2 and back With the the r0.42 viewer i can see the regions located on server 2 on the map, but when i try to connect via TP after a while i get the message: Could not teleport Problems connecting to destination. Any hints appreciated, but as the old viewer won't be in use much longer, it's just an observation :-) While making this setup, another question came up: knowing the ip addresses of the grid services and some coordinates to place a region, anyone could place a region in that grid? If this is the case, i think that some procedures will be necessary that allows grid operators and admins to manage who can place regions and where they can be placed. -- http://groups.google.com/group/realxtend http://www.realxtend.org -- http://groups.google.com/group/realxtend http://www.realxtend.org -- http://groups.google.com/group/realxtend http://www.realxtend.org
Re: [realXtend] Re: Grid setup question
Well that is only a warning and you can enable the better cache mechanisms in the configs if you know where to look. I'm not sure if this is needed for your average sim. OpenSim spews out a lot of warnings and even errors that you dont need to be concerned of in normal usage. Best regards, Jonne Nauha realXtend developer http://www.realxtend.org/ http://www.evocativi.com/ On Sat, Aug 28, 2010 at 11:51 AM, Peter Steinlechner psteinlech...@gmail.com wrote: Hi Ryan Taiga 0.1.3 works nicely - but i still have the same issue with the old viewer. I noticed the folowing error message at startup of the region : 10:13:49 - [CABLE BEACH ASSETS]: Failed to locate an IImprovedAssetCache. Storage for local and temporary assets will be disabled Though i get the same message on the region i have on the same server where the grid services run. Grid Service shows the region as connecting successfully Well - i only use the old viewer to build and because i can see into neighbouring regions and enter them without teleport. On Fri, Aug 27, 2010 at 1:08 PM, Peter Steinlechner psteinlech...@gmail.com wrote: Found it :-) On Fri, Aug 27, 2010 at 1:03 PM, Peter Steinlechner psteinlech...@gmail.com wrote: Hi Ryan not yet - atm i am still using Taiga 0.1.2 but im glad to give it a try. Where can I find it ? Cheers :-) On Fri, Aug 27, 2010 at 12:38 PM, Ryan McDougall sempu...@gmail.comwrote: Did you try using the TaigaWizard setup application? Taiga 0.1.3 RC? On Fri, Aug 27, 2010 at 1:30 PM, pedro psteinlech...@gmail.com wrote: I still wonder where i got things wrong in adding a region to a grid that's on a different server? The Region.ini file i use looks like this: [Sandbox] ExternalHostName=165.1.1.1 InternalPort=9001 Location=1004,1000 MasterAvatarFirstName=User MasterAvatarLastName=User MasterAvatarSandboxPassword=user RegionUUID=c114bc50-9d8e-4ba9-b65e-28f7eacc5363 region_name=Sandbox InternalAddress=165.1.1.1 AllowAlternatePorts=False The grid servers entry in the opensim ini point all to the correct IP and ports of the server where all grid services run. On the server where the above mentioned region is located i just start up OpenSim.32BitLaunch.exe When i try to get from a region thats located on the same server where the grid servers run to the sandbox box by using the r0.42 viewer, i get the following messages in the console of the Sandbox server: 12:23:22 - [CONNECTION BEGIN]: Region Sandbox told of incoming child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 1954024387, teleportflag s 16) 12:23:22 - [OGS1 USER SERVICES]: Verifying user session for d7e1567b- ce97-4b0d-a 085-82fe9ae09482 12:23:22 - [CONNECTION BEGIN]: User authentication returned True 12:23:22 - [CONNECTION BEGIN]: Region Sandbox authenticated and authorized incom ing child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 195 4024387) 12:23:22 - [CAPS]: Registered seed capability /CAPS/2eee15b0-e186-40f6- abc1-17ec 6ef41679/ for d7e1567b-ce97-4b0d-a085-82fe9ae09482 12:23:22 - [EVENTQUEUE]: Adding new queue for agent d7e1567b-ce97-4b0d- a085-82fe 9ae09482 in region Sandbox 12:23:22 - [OBJECTADD]: /CAPS/OA/cf0c5b53-0ecc-4b31-aff9-39d978f93803/ 12:23:22 - [GETTEXTURE]: /CAPS/ccd11f07-4121-4816-9c09-98980da9643c 12:23:24 - --- 12:23:24 - uri=/agent/d7e1567b-ce97-4b0d-a085-82fe9ae09482/ 12:23:24 - content-type=application/json 12:23:24 - http-method=PUT 12:23:24 - --- 12:23:54 - --- 12:23:54 - uri=/agent/d7e1567b-ce97-4b0d- a085-82fe9ae09482/1103909674543104/ 12:23:54 - content-type= 12:23:54 - http-method=DELETE 12:23:54 - --- 12:23:54 - [REST COMMS]: Agent Deleted. Region (Sandbox) # Any hint of what i could have got wrong is highly appreciated, the good or better the surprising thing is that the same settings work nicely in naali. Cheers On Aug 19, 9:56 am, pedro psteinlech...@gmail.com wrote: Hi all I tried to setup a grid by using Taiga 0.1.2 server on 2 independent servers Server 1 runs the grid services and 1 region Server 2 only runs 2 regions With naali i can teleport perfectly from server 1 to the 2 regions on server 2 and back With the the r0.42 viewer i can see the regions located on server 2 on the map, but when i try to connect via TP after a while i get the message: Could not teleport Problems connecting to destination. Any hints appreciated, but as the old viewer won't be in use much longer, it's just an observation :-) While making this setup, another question came up: knowing the ip addresses of the grid services and some coordinates to place a region, anyone could place a region in that grid? If this is the case, i think that some
Re: [realXtend] Re: Grid setup question
Thanks Jonne It was the only warning i had found while starting up the region, so i thought i will mention it. I wonder if I am the only one that has this issue? Anyhow when testing on some local desktops taiga0.1.3 i got a realy funny Norton Sonar behaviour that declared taigawizard.exe as dangerous and deleted it. :-( On Sat, Aug 28, 2010 at 11:09 AM, Jonne Nauha jonne.na...@evocativi.comwrote: Well that is only a warning and you can enable the better cache mechanisms in the configs if you know where to look. I'm not sure if this is needed for your average sim. OpenSim spews out a lot of warnings and even errors that you dont need to be concerned of in normal usage. Best regards, Jonne Nauha realXtend developer http://www.realxtend.org/ http://www.evocativi.com/ On Sat, Aug 28, 2010 at 11:51 AM, Peter Steinlechner psteinlech...@gmail.com wrote: Hi Ryan Taiga 0.1.3 works nicely - but i still have the same issue with the old viewer. I noticed the folowing error message at startup of the region : 10:13:49 - [CABLE BEACH ASSETS]: Failed to locate an IImprovedAssetCache. Storage for local and temporary assets will be disabled Though i get the same message on the region i have on the same server where the grid services run. Grid Service shows the region as connecting successfully Well - i only use the old viewer to build and because i can see into neighbouring regions and enter them without teleport. On Fri, Aug 27, 2010 at 1:08 PM, Peter Steinlechner psteinlech...@gmail.com wrote: Found it :-) On Fri, Aug 27, 2010 at 1:03 PM, Peter Steinlechner psteinlech...@gmail.com wrote: Hi Ryan not yet - atm i am still using Taiga 0.1.2 but im glad to give it a try. Where can I find it ? Cheers :-) On Fri, Aug 27, 2010 at 12:38 PM, Ryan McDougall sempu...@gmail.comwrote: Did you try using the TaigaWizard setup application? Taiga 0.1.3 RC? On Fri, Aug 27, 2010 at 1:30 PM, pedro psteinlech...@gmail.com wrote: I still wonder where i got things wrong in adding a region to a grid that's on a different server? The Region.ini file i use looks like this: [Sandbox] ExternalHostName=165.1.1.1 InternalPort=9001 Location=1004,1000 MasterAvatarFirstName=User MasterAvatarLastName=User MasterAvatarSandboxPassword=user RegionUUID=c114bc50-9d8e-4ba9-b65e-28f7eacc5363 region_name=Sandbox InternalAddress=165.1.1.1 AllowAlternatePorts=False The grid servers entry in the opensim ini point all to the correct IP and ports of the server where all grid services run. On the server where the above mentioned region is located i just start up OpenSim.32BitLaunch.exe When i try to get from a region thats located on the same server where the grid servers run to the sandbox box by using the r0.42 viewer, i get the following messages in the console of the Sandbox server: 12:23:22 - [CONNECTION BEGIN]: Region Sandbox told of incoming child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 1954024387, teleportflag s 16) 12:23:22 - [OGS1 USER SERVICES]: Verifying user session for d7e1567b- ce97-4b0d-a 085-82fe9ae09482 12:23:22 - [CONNECTION BEGIN]: User authentication returned True 12:23:22 - [CONNECTION BEGIN]: Region Sandbox authenticated and authorized incom ing child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 195 4024387) 12:23:22 - [CAPS]: Registered seed capability /CAPS/2eee15b0-e186-40f6- abc1-17ec 6ef41679/ for d7e1567b-ce97-4b0d-a085-82fe9ae09482 12:23:22 - [EVENTQUEUE]: Adding new queue for agent d7e1567b-ce97-4b0d- a085-82fe 9ae09482 in region Sandbox 12:23:22 - [OBJECTADD]: /CAPS/OA/cf0c5b53-0ecc-4b31-aff9-39d978f93803/ 12:23:22 - [GETTEXTURE]: /CAPS/ccd11f07-4121-4816-9c09-98980da9643c 12:23:24 - --- 12:23:24 - uri=/agent/d7e1567b-ce97-4b0d-a085-82fe9ae09482/ 12:23:24 - content-type=application/json 12:23:24 - http-method=PUT 12:23:24 - --- 12:23:54 - --- 12:23:54 - uri=/agent/d7e1567b-ce97-4b0d- a085-82fe9ae09482/1103909674543104/ 12:23:54 - content-type= 12:23:54 - http-method=DELETE 12:23:54 - --- 12:23:54 - [REST COMMS]: Agent Deleted. Region (Sandbox) # Any hint of what i could have got wrong is highly appreciated, the good or better the surprising thing is that the same settings work nicely in naali. Cheers On Aug 19, 9:56 am, pedro psteinlech...@gmail.com wrote: Hi all I tried to setup a grid by using Taiga 0.1.2 server on 2 independent servers Server 1 runs the grid services and 1 region Server 2 only runs 2 regions With naali i can teleport perfectly from server 1 to the 2 regions on server 2 and back With the the r0.42 viewer i can see the regions located on server 2 on the map, but when i try to connect via TP after a
Re: [realXtend] Re: Grid setup question
Hi Ryan not yet - atm i am still using Taiga 0.1.2 but im glad to give it a try. Where can I find it ? Cheers :-) On Fri, Aug 27, 2010 at 12:38 PM, Ryan McDougall sempu...@gmail.com wrote: Did you try using the TaigaWizard setup application? Taiga 0.1.3 RC? On Fri, Aug 27, 2010 at 1:30 PM, pedro psteinlech...@gmail.com wrote: I still wonder where i got things wrong in adding a region to a grid that's on a different server? The Region.ini file i use looks like this: [Sandbox] ExternalHostName=165.1.1.1 InternalPort=9001 Location=1004,1000 MasterAvatarFirstName=User MasterAvatarLastName=User MasterAvatarSandboxPassword=user RegionUUID=c114bc50-9d8e-4ba9-b65e-28f7eacc5363 region_name=Sandbox InternalAddress=165.1.1.1 AllowAlternatePorts=False The grid servers entry in the opensim ini point all to the correct IP and ports of the server where all grid services run. On the server where the above mentioned region is located i just start up OpenSim.32BitLaunch.exe When i try to get from a region thats located on the same server where the grid servers run to the sandbox box by using the r0.42 viewer, i get the following messages in the console of the Sandbox server: 12:23:22 - [CONNECTION BEGIN]: Region Sandbox told of incoming child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 1954024387, teleportflag s 16) 12:23:22 - [OGS1 USER SERVICES]: Verifying user session for d7e1567b- ce97-4b0d-a 085-82fe9ae09482 12:23:22 - [CONNECTION BEGIN]: User authentication returned True 12:23:22 - [CONNECTION BEGIN]: Region Sandbox authenticated and authorized incom ing child agent test user d7e1567b-ce97-4b0d-a085-82fe9ae09482 (circuit code 195 4024387) 12:23:22 - [CAPS]: Registered seed capability /CAPS/2eee15b0-e186-40f6- abc1-17ec 6ef41679/ for d7e1567b-ce97-4b0d-a085-82fe9ae09482 12:23:22 - [EVENTQUEUE]: Adding new queue for agent d7e1567b-ce97-4b0d- a085-82fe 9ae09482 in region Sandbox 12:23:22 - [OBJECTADD]: /CAPS/OA/cf0c5b53-0ecc-4b31-aff9-39d978f93803/ 12:23:22 - [GETTEXTURE]: /CAPS/ccd11f07-4121-4816-9c09-98980da9643c 12:23:24 - --- 12:23:24 - uri=/agent/d7e1567b-ce97-4b0d-a085-82fe9ae09482/ 12:23:24 - content-type=application/json 12:23:24 - http-method=PUT 12:23:24 - --- 12:23:54 - --- 12:23:54 - uri=/agent/d7e1567b-ce97-4b0d- a085-82fe9ae09482/1103909674543104/ 12:23:54 - content-type= 12:23:54 - http-method=DELETE 12:23:54 - --- 12:23:54 - [REST COMMS]: Agent Deleted. Region (Sandbox) # Any hint of what i could have got wrong is highly appreciated, the good or better the surprising thing is that the same settings work nicely in naali. Cheers On Aug 19, 9:56 am, pedro psteinlech...@gmail.com wrote: Hi all I tried to setup a grid by using Taiga 0.1.2 server on 2 independent servers Server 1 runs the grid services and 1 region Server 2 only runs 2 regions With naali i can teleport perfectly from server 1 to the 2 regions on server 2 and back With the the r0.42 viewer i can see the regions located on server 2 on the map, but when i try to connect via TP after a while i get the message: Could not teleport Problems connecting to destination. Any hints appreciated, but as the old viewer won't be in use much longer, it's just an observation :-) While making this setup, another question came up: knowing the ip addresses of the grid services and some coordinates to place a region, anyone could place a region in that grid? If this is the case, i think that some procedures will be necessary that allows grid operators and admins to manage who can place regions and where they can be placed. -- http://groups.google.com/group/realxtend http://www.realxtend.org -- http://groups.google.com/group/realxtend http://www.realxtend.org -- http://groups.google.com/group/realxtend http://www.realxtend.org