Re: kppp problem with modem
At 12:36 AM 4/25/00 +0430, Maziar Mahzari wrote: >Mikke; >I put the modem right in the same port. However, the former one was >detected on ttys1 (com2) whereas the new modem is detected on ttys3 >(com4). I set the same setting in kppp which has a modem control utility >too. >I don't use the link to modem, I set it ttys3 in control panel->modem. >moreover, it works fine with minicom. >Thanks very much >Maziar > I am not sure what is going on then - the hardware is working seance it works in minicom. About the only thing I can think of is if you are really using ttys3 in kpp, instead of ttyS3... If you had the interrupt wrong, or were trying to share an ISA interrupt, you would notice delays in modem response when using minicom. I hope someone else has an idea, because I am fresh out! Mikkel -- Do not meddle in the affairs of dragons, for you are crunchy and taste good with ketchup. -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.
Re: kppp problem with modem
Mikke; I put the modem right in the same port. However, the former one was detected on ttys1 (com2) whereas the new modem is detected on ttys3 (com4). I set the same setting in kppp which has a modem control utility too. I don't use the link to modem, I set it ttys3 in control panel->modem. moreover, it works fine with minicom. Thanks very much Maziar On Mon, 24 Apr 2000, Mikkel L. Ellertson wrote: > At 10:28 PM 4/24/00 +0430, you wrote: > >Dear friends; > >I use kppp to connect to my ISP. However, since I changed my modem, kppp > >fails to make connection (as well as ifup). I thought that the modem > >might be a winmodem but I was wrong cause I can use minicom to connect to > >another host. The interesting point is that the mini terminal > >application inside kppp setup works fine. > >kppp fails right at dialing string ie atdt... I've a 14400 modem on > >ttys3 and RH6.0 installed. Any idea? > >Thanks > >Maziar > > > > > When you changed modems, did you put the new modem on the same port as the old > one? If not, did you change the settings in your ppp setup to reflect the > new port. (Or if you use /dev/modem, did you update the symlink?) > > Mikkel > > -- > Do not meddle in the affairs of dragons, > for you are crunchy and taste good with ketchup. > > > -- > To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" > as the Subject. > -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.
Re: kppp problem with modem
At 10:28 PM 4/24/00 +0430, you wrote: >Dear friends; >I use kppp to connect to my ISP. However, since I changed my modem, kppp >fails to make connection (as well as ifup). I thought that the modem >might be a winmodem but I was wrong cause I can use minicom to connect to >another host. The interesting point is that the mini terminal >application inside kppp setup works fine. >kppp fails right at dialing string ie atdt... I've a 14400 modem on >ttys3 and RH6.0 installed. Any idea? >Thanks >Maziar > > When you changed modems, did you put the new modem on the same port as the old one? If not, did you change the settings in your ppp setup to reflect the new port. (Or if you use /dev/modem, did you update the symlink?) Mikkel -- Do not meddle in the affairs of dragons, for you are crunchy and taste good with ketchup. -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.
kppp problem with modem
Dear friends; I use kppp to connect to my ISP. However, since I changed my modem, kppp fails to make connection (as well as ifup). I thought that the modem might be a winmodem but I was wrong cause I can use minicom to connect to another host. The interesting point is that the mini terminal application inside kppp setup works fine. kppp fails right at dialing string ie atdt... I've a 14400 modem on ttys3 and RH6.0 installed. Any idea? Thanks Maziar -- To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.