Re: [Repeater-Builder] Just a couple of dB loss you say?
Greetings, Nit-Pickers Back in 1965 the Buffalo repeater WB2TLJ and the Toronto repeater VE3RPT used secode tonesa single tone interupted by a standard telephone dial to remote control the repeater. This was prior to using DTMF (Touch-Tone) VE3KSR in Kitchener, Ont was among the very first repeaters in this area to use Touch-Tone in 1969. 73 John VE3AMZ - Original Message - From: Chuck Kelsey [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 1:42 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | I was wondering how he dialed his phone. | | Chuck | WB2EDV | | | | - Original Message - | From: Neil McKie [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 8:07 AM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | |If the dual tones went away. how do you remotely control your | system via radio? | |Neil | | Ken Arck wrote: | | At 10:48 AM 7/16/2004 -0700, you wrote: | | I know, now you want my study of the tone frequency comparisons |of the Bell System Touch-Tone plan? | | ---Naaah. Dual tones went out with 62 Nash Ramblers :-) | | Ken | - | President and CTO - Arcom Communications | Makers of state-of-the-art repeater controllers and accessories. | http://www.ah6le.net/arcom/index.html | AH6LE/R - IRLP Node 3000 | http://www.irlp.net | | | Yahoo! Groups Links | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | Yahoo! Groups Links | | | | | Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Help with new(ish) ant
Hello Guys .. I have what I belive to be a sinclair folded dipole ant. ( 4bay) (the coax runs down the support arm into the dipole) I don't know how wide band this ant is the inside dim is aprox 33inch the with if the tume I would say a good 1/2 I am looking to install this on to our repeater ( 147.300) I am not sure what this ant is cut for right now I hope some one can help us out so we can move from a ringo to a better ant. Thanks RIck Rick Szajkowski VA3 RZS Charlotte Darby VA3 CMR Node Owners of IRLP Node 2120 Lakefield Ont Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
This sounds like the way the old mobile Radio Telephones used I think was 20 khz. ( ?? ) tone and the rotary dial , and looking at the control in that fashion old RT used the 152-157 Mhz. offset I think if I have it right. Mark A. Holman, CRO, AB8RU [EMAIL PROTECTED] - Original Message - From: John J. Riddell [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 8:01 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? Greetings, Nit-Pickers Back in 1965 the Buffalo repeater WB2TLJ and the Toronto repeater VE3RPT used secode tonesa single tone interupted by a standard telephone dial to remote control the repeater. This was prior to using DTMF (Touch-Tone) VE3KSR in Kitchener, Ont was among the very first repeaters in this area to use Touch-Tone in 1969. 73 John VE3AMZ - Original Message - From: Chuck Kelsey [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 1:42 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | I was wondering how he dialed his phone. | | Chuck | WB2EDV | | | | - Original Message - | From: Neil McKie [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 8:07 AM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | |If the dual tones went away. how do you remotely control your | system via radio? | |Neil | | Ken Arck wrote: | | At 10:48 AM 7/16/2004 -0700, you wrote: | | I know, now you want my study of the tone frequency comparisons |of the Bell System Touch-Tone plan? | | ---Naaah. Dual tones went out with 62 Nash Ramblers :-) | | Ken | - | President and CTO - Arcom Communications | Makers of state-of-the-art repeater controllers and accessories. | http://www.ah6le.net/arcom/index.html | AH6LE/R - IRLP Node 3000 | http://www.irlp.net | | | Yahoo! Groups Links | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | Yahoo! Groups Links | | | | | Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Secode MTS Decoders - Some History
Shades of all-tube mobile radios with Dynamotors! In 1970, I had a GE Pacer under-dash 2-channel mobile radio with a Secode MTS decoder mounted on its right side, with a PTT handset on the front. My telephone number was JL-2-6759, the JL indicating which of the MTS channels I was to monitor. A Pacer was completely tubed, but it had a transistorized power supply and put out 12 watts. The Secode decoder was an electromechanical stepper switch that responded to the 600/1500 Hz tones. When a call to a mobile unit was being made, the 1500 Hz tone was changed to 600 Hz at a 10 PPS rate. Each pulse ratcheted the decoder wheel one notch, and pins were placed at each notch that represented one of the digits of the assigned phone number. If a pin was at the notch where each pulsing series ended, the wheel would be latched at that point, ready for the next digit. As each of the five digits was dialed, the wheel would make it all the way to the ringing contact. If any of the five digits did not match the pin placement, the wheel would not be latched and would return to the home position. Because there were few MTS users in town, I usually knew that an incoming call was for me, simply by counting the stepping sounds in my head. In 1970, the move to IMTS had already begun. IMTS used frequency-agile radios that could place and receive calls automatically. To place a call, I had to lift the handset and first ensure that nobody was using the channel. If it was free, I keyed the PTT for two seconds or so, and waited for the mobile operator to respond. I then gave her my mobile telephone number and the number I wanted to call. This was certainly a slow and bothersome way to make a phone call, but hey- this was in the early days of mobile telephone service! 73, Eric Lemmon WB6FLY Mark Holman wrote: This sounds like the way the old mobile Radio Telephones used I think was 20 khz. ( ?? ) tone and the rotary dial, and looking at the control in that fashion old RT used the 152-157 MHz. offset I think if I have it right. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Secode MTS Decoders - Some History
Hey, it may have been obsolete technology, but it sure beat the heck out of performance people are expected to put up with using cell phones. That old technology actually worked good. Chuck WB2EDV - Original Message - From: Eric Lemmon [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 10:26 PM Subject: [Repeater-Builder] Secode MTS Decoders - Some History To place a call, I had to lift the handset and first ensure that nobody was using the channel. If it was free, I keyed the PTT for two seconds or so, and waited for the mobile operator to respond. I then gave her my mobile telephone number and the number I wanted to call. This was certainly a slow and bothersome way to make a phone call, but hey- this was in the early days of mobile telephone service! 73, Eric Lemmon WB6FLY Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
Mark, The Public Mobile tel's used 600 / 1500 Hz alternating when a mobile was dialed. The first signal sent was a 600 followed by a 1500 Hz tone to clear the selector, then the number was dialed. This was the old YJ,YK,JK etc stations Tx on 152.xxx Mhz. The receiver in the base station was 5.26 Mhz higher in freq. Western Electric made a big beast of a decoder with an wheel in it for programming and later here in Canada we used an Electronic selector made by Scantlin Co (I used to fix those brutes back in the early 60's while working at Bell Canada.) John VE3AMZ - Original Message - From: Mark Holman [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 8:49 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | This sounds like the way the old mobile Radio Telephones used I think was 20 | khz. ( ?? ) tone and the rotary dial , and looking at the control in that | fashion old RT used the 152-157 Mhz. offset I think if I have it right. | | Mark A. Holman, CRO, AB8RU | [EMAIL PROTECTED] | | - Original Message - | From: John J. Riddell [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 8:01 PM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | Greetings, Nit-Pickers | | Back in 1965 the Buffalo repeater WB2TLJ and the Toronto repeater VE3RPT | used secode tonesa single | tone interupted by a standard telephone dial to remote control the | repeater. | This was prior to using DTMF (Touch-Tone) | | VE3KSR in Kitchener, Ont was among the very first repeaters in this area | to | use | Touch-Tone in 1969. | | 73 John VE3AMZ | | | - Original Message - | From: Chuck Kelsey [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 1:42 PM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | | I was wondering how he dialed his phone. | | | | Chuck | | WB2EDV | | | | | | | | - Original Message - | | From: Neil McKie [EMAIL PROTECTED] | | To: Repeater-Builder@yahoogroups.com | | Sent: Saturday, July 17, 2004 8:07 AM | | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | | | | | |If the dual tones went away. how do you remotely control your | | system via radio? | | | |Neil | | | | Ken Arck wrote: | | | | At 10:48 AM 7/16/2004 -0700, you wrote: | | | | I know, now you want my study of the tone frequency comparisons | |of the Bell System Touch-Tone plan? | | | | ---Naaah. Dual tones went out with 62 Nash Ramblers :-) | | | | Ken | | - | | President and CTO - Arcom Communications | | Makers of state-of-the-art repeater controllers and accessories. | | http://www.ah6le.net/arcom/index.html | | AH6LE/R - IRLP Node 3000 | | http://www.irlp.net | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | | | | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | Yahoo! Groups Links | | | | | | Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
In the earlier days of all of this, frequently a rotary dial from your home telephone was used. Most of all, not only for controlling the system but making those all important (?) phone calls too. I remember in the early seventies, someone in the Southern California area somehow managed to score a bunch of Western Electric Touch-Tone key pads. The early ones were the ten button type ... later the 12 button and, occasionally, a very rare 16 button keypad showed up. They all were made by Western Electric and worked quite well as I remember. A few of the systems I was on required the 16 button keypad, so I bought one and installed it in a Radio Shack project box. The output ran to a selector switch so I could select either the UHF GE Mastr-Pro or the UHF Motorola Motrac I was using - I had both installed in a couple of my cars at the time. Both radios were four frequency, duplexed, multiple CTCSS encode and using separate antennas for transmit and receive. I had the necessary parts for making the GE Mastr-Pro into an 8 frequency radio but that wouldn't have worked with the GE Priority Search-Lock Monitor (PSLM) Control head I was using. This was in the days of cheap crystals and rather expensive, for us, radios. Electrical systems in the cars are another story ... One car had six Motorola and GE control heads from door to door, and seven or eight antennas. Another car had a 150 watt incadescent light bulb hanging from the rear view mirror ... a map reading lamp of course. If any of you wander this direction sometime, I can show you some of these fun radios. Enjoy yourself, Neil McKie - WA6KLA John J. Riddell wrote: Greetings, Nit-Pickers Back in 1965 the Buffalo repeater WB2TLJ and the Toronto repeater VE3RPT used secode tonesa single tone interupted by a standard telephone dial to remote control the repeater. This was prior to using DTMF (Touch-Tone) VE3KSR in Kitchener, Ont was among the very first repeaters in this area to use Touch-Tone in 1969. 73 John VE3AMZ - Original Message - From: Chuck Kelsey [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 1:42 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | I was wondering how he dialed his phone. | | Chuck | WB2EDV | | | | - Original Message - | From: Neil McKie [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 8:07 AM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | |If the dual tones went away. how do you remotely control your | system via radio? | |Neil | | Ken Arck wrote: | | At 10:48 AM 7/16/2004 -0700, you wrote: | | I know, now you want my study of the tone frequency |comparisons of the Bell System Touch-Tone plan? | | ---Naaah. Dual tones went out with 62 Nash Ramblers :-) | | Ken | -- | President and CTO - Arcom Communications | Makers of state-of-the-art repeater controllers and | accessories. http://www.ah6le.net/arcom/index.html | AH6LE/R - IRLP Node 3000 | http://www.irlp.net | Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
The Secode tone was 2805 CPS and the mechanical decoder used a pin to latch when a proper pulse count was received. A number of the RCC phone systems used that for selective calling. The MTS and later IMTS phones used the same type of mechanical decoder but used alternating mark and space tones of 600 and 1500 CPS. The Motorola IMTS logic board was a fully discreet transistor decoder that used jumper wires to program the number. They were about 14 by 20 inch PC Boards that were really densely populated. They were a bugger to fix, most shops exchanged them with Bat Parts when they failed. Now the entire decoder is the size of a postage stamp! Jack K6YC - Original Message - From: John J. Riddell [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 5:01 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? Greetings, Nit-Pickers Back in 1965 the Buffalo repeater WB2TLJ and the Toronto repeater VE3RPT used secode tonesa single tone interupted by a standard telephone dial to remote control the repeater. This was prior to using DTMF (Touch-Tone) VE3KSR in Kitchener, Ont was among the very first repeaters in this area to use Touch-Tone in 1969. 73 John VE3AMZ - Original Message - From: Chuck Kelsey [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 1:42 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | I was wondering how he dialed his phone. | | Chuck | WB2EDV | | | | - Original Message - | From: Neil McKie [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 8:07 AM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | |If the dual tones went away. how do you remotely control your | system via radio? | |Neil | | Ken Arck wrote: | | At 10:48 AM 7/16/2004 -0700, you wrote: | | I know, now you want my study of the tone frequency comparisons |of the Bell System Touch-Tone plan? | | ---Naaah. Dual tones went out with 62 Nash Ramblers :-) | | Ken | - | President and CTO - Arcom Communications | Makers of state-of-the-art repeater controllers and accessories. | http://www.ah6le.net/arcom/index.html | AH6LE/R - IRLP Node 3000 | http://www.irlp.net | | | Yahoo! Groups Links | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | Yahoo! Groups Links | | | | | Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Micor Base/Repeater Power Amplifier mod?
I'm curious to know if anyone is using a B93 Micor station on two- meters and what if any modifications are required to make it operate? Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
In my hay-day I had the following all installed in a 1978 Camaro 8 channel scanner (to monitor local law fire on low, high UHF) 4 channel 100 watt 150 MHz Mocom 70 for my 2 VHF business freqs 12 channel 100 watt Micor on 29.6 MHz other 10 FM freqs (with extender) 4 channel 50 watt CHP Motran on 52.525 MHz 40 channel AM/SSB CB (with funny channels) and a 150 watt linear amp 2 meter Icom 280 (programmable with remote head option) and 80 watt amp Of course, I also had a AM/FM Stereo (Pioneer) with 4 speakers Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
Does anyone know if any of the old 35/43 MHz mobile phone systems still exist? For that mater, do any of the 152/157 MHz or 450 Mhz mobile phone systems still exist? Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
I think I may still that video of your '78 Camaro ... somewhere. Neil JOHN MACKEY wrote: In my hay-day I had the following all installed in a 1978 Camaro 8 channel scanner (to monitor local law fire on low, high UHF) 4 channel 100 watt 150 MHz Mocom 70 for my 2 VHF business freqs 12 channel 100 watt Micor on 29.6 MHz other 10 FM freqs (with extender) 4 channel 50 watt CHP Motran on 52.525 MHz 40 channel AM/SSB CB (with funny channels) and a 150 watt linear amp 2 meter Icom 280 (programmable with remote head option) and 80 watt amp Of course, I also had a AM/FM Stereo (Pioneer) with 4 speakers Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
Yeah,me too. RCC chs 1,3,5,7,13,25,27,29.Could read the number by ear too...then went to DTMF/2 tone and I can almost read those by ear too. Most of those channels are now paging around here...thanks to cellular. 2 way is also pretty dead around here... - Original Message - From: russ [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, July 18, 2004 8:43 AM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? This is what the wire line phone co's used. Most of the RCC's did use 2805 Secode for dialing. I use to own channel 5 (rcc) in Wilmington Del. Well part owner any way at one time. and we also had Secode it was 2805 HZ from what I remember from the 70thy's. - Original Message - From: JOHN MACKEY [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, July 18, 2004 2:47 AM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? Does anyone know if any of the old 35/43 MHz mobile phone systems still exist? For that mater, do any of the 152/157 MHz or 450 Mhz mobile phone systems still exist? Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Just a couple of dB loss you say?
It was kind of a joke in the 70's,,, We all had Motracs, 8 tracks and Japtracs. td Message: 16 Date: Sun, 18 Jul 2004 01:44:39 -0500 From: JOHN MACKEY [EMAIL PROTECTED] Subject: Re: Just a couple of dB loss you say? In my hay-day I had the following all installed in a 1978 Camaro 8 channel scanner (to monitor local law fire on low, high UHF) Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: Just a couple of dB loss you say?
Good point Tony, Neil tony dinkel wrote: It was kind of a joke in the 70's,,, We all had Motracs, 8 tracks and Japtracs. td Message: 16 Date: Sun, 18 Jul 2004 01:44:39 -0500 From: JOHN MACKEY [EMAIL PROTECTED] Subject: Re: Just a couple of dB loss you say? In my hay-day I had the following all installed in a 1978 Camaro 8 channel scanner (to monitor local law fire on low, high UHF) Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Help with 210C4 (sd214)
Thanks guys for the help finding out what this ant really is no I need help rebuilding the cables .. from the dipole there is about 6-8 inc of cable with a N conn. on it now to build the cable to allow all 4 dipoles to work together has any one built the harness for these ?? the freq I need is for the top of our band 117.300/147.900 Thanks for any help in this matter Rick Rick Szajkowski VA3 RZS Charlotte Darby VA3 CMR Node Owners of IRLP Node 2120 Lakefield Ont Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
What I was told @ Ferris State College back in 1974 by my Radio Television Instructor, I was wondering now maybe there are several variations of this mobile phone, one person thought you could turn it into a Repeater ( ?? ) kinda wide bandwidth for its operation I think. Mark A. Holman, CRO, AB8RU [EMAIL PROTECTED] - Original Message - From: John J. Riddell [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 9:04 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? Mark, The Public Mobile tel's used 600 / 1500 Hz alternating when a mobile was dialed. The first signal sent was a 600 followed by a 1500 Hz tone to clear the selector, then the number was dialed. This was the old YJ,YK,JK etc stations Tx on 152.xxx Mhz. The receiver in the base station was 5.26 Mhz higher in freq. Western Electric made a big beast of a decoder with an wheel in it for programming and later here in Canada we used an Electronic selector made by Scantlin Co (I used to fix those brutes back in the early 60's while working at Bell Canada.) John VE3AMZ - Original Message - From: Mark Holman [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, July 17, 2004 8:49 PM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | This sounds like the way the old mobile Radio Telephones used I think was 20 | khz. ( ?? ) tone and the rotary dial , and looking at the control in that | fashion old RT used the 152-157 Mhz. offset I think if I have it right. | | Mark A. Holman, CRO, AB8RU | [EMAIL PROTECTED] | | - Original Message - | From: John J. Riddell [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 8:01 PM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | Greetings, Nit-Pickers | | Back in 1965 the Buffalo repeater WB2TLJ and the Toronto repeater VE3RPT | used secode tonesa single | tone interupted by a standard telephone dial to remote control the | repeater. | This was prior to using DTMF (Touch-Tone) | | VE3KSR in Kitchener, Ont was among the very first repeaters in this area | to | use | Touch-Tone in 1969. | | 73 John VE3AMZ | | | - Original Message - | From: Chuck Kelsey [EMAIL PROTECTED] | To: Repeater-Builder@yahoogroups.com | Sent: Saturday, July 17, 2004 1:42 PM | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | | I was wondering how he dialed his phone. | | | | Chuck | | WB2EDV | | | | | | | | - Original Message - | | From: Neil McKie [EMAIL PROTECTED] | | To: Repeater-Builder@yahoogroups.com | | Sent: Saturday, July 17, 2004 8:07 AM | | Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? | | | | | | | |If the dual tones went away. how do you remotely control your | | system via radio? | | | |Neil | | | | Ken Arck wrote: | | | | At 10:48 AM 7/16/2004 -0700, you wrote: | | | | I know, now you want my study of the tone frequency comparisons | |of the Bell System Touch-Tone plan? | | | | ---Naaah. Dual tones went out with 62 Nash Ramblers :-) | | | | Ken | | - | | President and CTO - Arcom Communications | | Makers of state-of-the-art repeater controllers and accessories. | | http://www.ah6le.net/arcom/index.html | | AH6LE/R - IRLP Node 3000 | | http://www.irlp.net | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | | | | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | | | | | | | Yahoo! Groups Links | | | | | | | | | | | | Yahoo! Groups Links | | | | | | Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Just a couple of dB loss you say?
Well I head North in Michigan up US -131 some spots are cell dead, thats where VHF repeaters and some UHF repeaters come in depends how close you are to that Canadain Cooridor that is in the Regs. I do know the Northern Boys are if a repeater isn't available, then if HF Comm or Simplex is useable then they use it, but don't mention 11M. to them some places thats a Swear Word, Banned from their List, etc.. they are 100% dyed in the wool hams. Mark A. Holman, CRO, AB8RU [EMAIL PROTECTED] - Original Message - From: Q [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, July 18, 2004 9:14 AM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? Yeah,me too. RCC chs 1,3,5,7,13,25,27,29.Could read the number by ear too...then went to DTMF/2 tone and I can almost read those by ear too. Most of those channels are now paging around here...thanks to cellular. 2 way is also pretty dead around here... - Original Message - From: russ [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, July 18, 2004 8:43 AM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? This is what the wire line phone co's used. Most of the RCC's did use 2805 Secode for dialing. I use to own channel 5 (rcc) in Wilmington Del. Well part owner any way at one time. and we also had Secode it was 2805 HZ from what I remember from the 70thy's. - Original Message - From: JOHN MACKEY [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, July 18, 2004 2:47 AM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? Does anyone know if any of the old 35/43 MHz mobile phone systems still exist? For that mater, do any of the 152/157 MHz or 450 Mhz mobile phone systems still exist? Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
