Re: [Repeater-Builder] An advocate for a little audio compression

2009-08-09 Thread John Sichert
I use a Behringer MDX2200.
I think it has been discontinued for some time. It has all the hot 
stuff you want. Compressor, limiter, and a noise gate. It doesn't 
take very long to tune it in. If you don't have it right, you'll know it...

Looks like they are going for about $75 on eSlay.

John



At 11:10 PM 8/9/2009, you wrote:
what equipment have you used to do the compression?

-- Original Message --
Received: Sun, 09 Aug 2009 08:07:45 PM PDT
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] An advocate for a little audio compression

  re: An advocate for a little audio compression.
 
  Yeah, I know a decent number of you are in-stone
  same-in to same-out repeater audio levels types.
 
  However, I've changed my opinion.
 
  A number of operators don't seem to have voices that
  drive their radios with adequate audio and I always
  seem to be reaching for the volume control.
 
  So I've started adding a modest amount of audio
  compression to a few repeaters and the difference is
  a very pleasant and well received change.
 
  Consider 6 to 10dB of audio compression in your repeater
  system if you're constantly reaching for the volume
  control while listening to more than one person
  talk at different levels. I'm experimenting with higher
  and even dynamic audio compression values but for most
  situations the above values seem to work well.
 
  If you're not sure how to add a bit of audio compression
  to your specific system... wouldn't be hard to describe
  it as in most cases the hardware is already in place.
 
  Transparent or flat through repeater audio can be made
  louder without causing the world to come to screeching
  halt.
 
  cheers,
  skipp
 
 









Yahoo! Groups Links





Re: [Repeater-Builder] Re: Closed Repeaters

2009-07-26 Thread John Sichert
If you do have your tent set up on public property, you would not 
care who enters it?
I value my life, how about you? Or in this case, my license.

This stuff about holding a frequency hostage... You are certainly 
welcome to use any frequency that a repeater uses, just not be 
repeated through it. If the repeater is deemed limited access, you 
must ask for permission to use it.

If you have a closed repeater or know of someone that does, why is it 
closed? It is monetary, or a decision to limit access to a group of friends?
Most I know of, are a group of friends.

John






At 09:14 AM 7/26/2009, you wrote:
The point has been made that a closed repeater (actually any 
repeater) is private property and others have no right to utilize 
it.  I would agree to that premise except for the fact that the 
repeater utilizes PUBLIC spectrum.

The analogy would be: I have a large tent that I like to set up on 
my property.  If I take that same tent and permanently set it up in 
a public park and, I keep others from entering my tent, I am using 
PUBLIC property for my own, exclusive use.  Would that set well with 
most of you?

I have a closed repeater that has PUBLIC spectrum coordinated for 
it.  That has the effect of allocating that PUBLIC asset for my exclusive use.

Why should a repeater be different than the tent?







Yahoo! Groups Links





Re: [Repeater-Builder] Suggestions for Gel Cell Charging - Large Array

2009-02-16 Thread John Sichert
These units are very popular with RV  boat folks. I have the 60 amp 
version in my truck camper, I am very happy with it. By what I can 
determine, it will give a full charge in about 8 hours. I have it 
feeding a 190 AH battery string. You will have to work the numbers to 
find out the charge time, I would buy the 80 amp version. It will 
take a while to bring a string that size back up. Make sure you add a 
low voltage disconnect to protect the batteries. If they go flat, 
they will never come back to their original capacity.


If you use a charge controller, and a 13.6 supply, the job will get 
done eventually. Note the charge curves.

http://www.progressivedyn.com/prod_details/charge_wizard.html

Best Converter seems to have good pricing on them.

http://www.bestconverter.com/80-Amp-RV-ConverterCharger_p_173.html


If you want really snaz it up, use a battery monitor gauge.

http://www.xantrex.com/web/id/274/p/1/pt/5/product.asp

You can use the alarm relay to trip your controller, to tell you when 
the battery capacity has gone below the set threshold.

I have read, repeated discharges below 50% are not recommended for long life.



At 10:04 AM 2/16/2009, you wrote:
I have a site which seems to be at the bottom of Idaho Power's to-do 
list when it comes to outages. The last major service interruption 
for for 8 days.


Previously, our repeater was piggybacked on a commercial user's 
battery back up which gave us working power for about 3 days (duty 
cycle on the commercial gear was much higher than our equipment). 
That company has since gone belly up and removed their equipment and 
back up power leaving us with nothing but AC to rely upon.


I've inherited several dozen Gel Cell batteries previously in use 
for CATV line equipment power supplies. These are rated at 85-90 amp 
hour. Our plan in the spring is to put 10 of these up on the site 
for roughly an 800 amp hour array, with plans to go up from there. 
The vast majority of the Ham plans I've seen on the web are designed 
for 7-12 amp hour Gel Cell charging at a rate of less than 1 amp. Is 
there an a relatively inexpensive method of charging these batteries 
without completely breaking the bank?


I know in a recent conversation here on RB, one of the users had a 
Solar Charge Controller inline between his 12 volt power supply (in 
our case a GE Mastr II 30 amp supply) and the actual repeater equipment.


Any *useful* information is much appreciated HI HI :)

73s,
AJ, K6LOR







Re: [Repeater-Builder] Help with intermod between repeaters.

2009-02-14 Thread John Sichert
I hate to tell you, a definite way to eliminate 
the problem, is a frequency change so that the 
output of the two transmitters are no longer not 600 khz apart.
It is possible that the mixing is occurring in 
one of the PA's. If the problem is a mix in the 
TX, an isolator on the offending TX should solve 
it. I like the Sinclair isolators.

2A-B  Most likely a 3rd order intermod product  146.76 X 2 = 293.52

293.52 - 147.36 = 146.16  Bad place for it to end 
up on. I have run into this problem several times.


Telco : I think you meant to say, the trouble 
must be on your end, it is leaving here ok... I 
can't use that excuse, my SXS office does not talk to the outside world yet...

Good Luck
John




At 06:34 PM 2/14/2009, you wrote:
Bare with me this is a bit long.
Our repeater is on 146.76TX / 146.16RX. In the next town the repeater
having the problem is on 147.36TX / 147.96RX. Both repeaters are
Motorola Micors. Our repeater is a 100 watt PA running about 60watts
with a single band pass cavity between TX and a 4 cavity BPBR
duplexer connected to 250 feet of 7/8 hard line and a DB224 antenna.
The distance between repeaters is about 18 miles line of sight with
no obstructions. The other repeater is running a smaller PA driver
with an output of 25 watts. I am not sure of the full power
capability of this driver. This PA then drives a ¼ KW tube type final
set at about 90 watts. This is connected to a 4 cavity BPBR duplexer,
200 feet of ½ hard line, and a DB224 antenna.

The problem is when the our repeater 146.76 is in transmit and
someone keys the 147.36 repeater a loop condition is set up locking
on the 147.36 on until the 146.76 drops. Also audio feedback is heard
on the 146.36 repeater. This is typical receiver transmitter intermod.

Here is what I have done so for. I checked the 146.76 repeater and
there is no signal on it on 147.96 or any other frequency other than
146.76. I then drove to the 146.36 repeater location and from my car
in front of the repeater building duplicated the problem by
transmitting on 146.76. As we used to say in the phone business, the
trouble is leaving here OK.  Next I put a calibrated receiver on the
TX port of their BPBR duplexer and measured about -50DB when the
146.76 repeater was on. Also I could not squelch out the .76 signal
by holding my hands over the antenna of my handheld radio in the
building. There is lots of.76 signal down there so I suspect
transmitter mixing of the 146.76 with 147.36 in the .36 PA. But
where? I disconnected the ¼ KW PA and hooked the driver up directly
to the duplexer and the mixing signal on 147.96 is worse. I then put
one band pass 147.36, band reject 147. 76 cavity between the PA
driver and the duplexer. To my surprise the mixing signal on 147.96
is even higher! I also tried a single band pass cavity with about the
same results. Having run out of cavity's I came back home.

  I realize their PA driver most likely needs to be checked. If the
driver PA is ok they will need 30 to 50 DB of isolation between the
147.36 final and the duplexer which will be at least two cavities. I
was able to duplicate this mixing with a couple of 2 meter radios, a
lossy T connector and a signal generator. I took two high pass
cavities out of a duplexer tuning then to pass 147.36 and reject
146.76. I ended up with around 70DB of rejection and 2DB in the pass.
I recorded the amount of signal needed to cause the mixing. I then
put the cavities between the signal generator and transmitter.  To my
surprise the amount of signal to start mixing was about the same. The
cavities are the type with a T on one port and a compression
capacitor for the reject tuning.
Some questions I have for the group are:
1. What is the best type of cavity filter to use in this situation
and where should it be placed?
2. Has anyone else seen that, been there, done that, and what was
your solution?
Any information or ideas will be appreciated.








Yahoo! Groups Links





Re: [Repeater-Builder] OT- Digital TV converter box issues

2009-01-08 Thread John Sichert

Mike,

The Echostar PAL unit has a good electronic program guide. A friend 
of mine has a problem with the unit locking up sometimes. (Could just be his)


The best unit as far as sensitivity goes, seems to be the Channel 
Master CM-7000.

It also has an S-Video output that the others lack.

The cheapest place I have found to get a CM-7000 is Stark 
Electronics. Nice people to deal with.

http://www.starkelectronic.com/cm7000.htm

There have been many discussions about the converter boxes at www.avsforums.com

Good Luck
John






At 06:49 AM 1/8/2009, you wrote:

I've got a different problem -

1) the folks that had this mobile home before me burned this
address as far as the coupon database is concerned (I can't
get coupons at this address).

2) They won't send them to a PO box.

3) The post office forwards my old address, but I can't use
it - the envelopes have a DO NOT FORWARD stamp on them.

4) I can't use my work address, as the address database
knows that it's a business.

5) All of my friends are getting boxes using their addresses - they
want the extra box for hacking purposes (nobody has a spare coupon).

6) According to the NAB SmartBrief newsletter for January 6, 2009 the
coupon folks have run out of DTV coupons and have started a waiting list.

As of Sunday, the U.S. government had run out of the $40 coupons that
can be used to buy converter boxes for the DTV transition. A huge
spike in requests in December -- when the government anticipated about
4 million requests but received 7.2 million -- now means new
coupon-seekers have to be put on a waiting list. According to a report
in National Journal's CongressDaily, the coupon shortfall stems from
NTIA's reliance on estimates from the Consumer Electronics Association
and Nielsen Media Research, as opposed to the higher estimate made by NAB.

For info on the National Association of Broadcasters SmartBrief see
 http://www.smartbrief.com/nab

Anybody else have suggestions / recommendations / warnings
about what brand of box to buy or to avoid ?

Mike WA6ILQ



At 12:21 PM 01/05/09, you wrote:


Having issues converting over to digital TV.
My father volunteered my services to a few of his friends, all
serious seniors, Detroit market, As an elecronic wizard (my dad's
words) I should be able to make anything with wires work well.

Most converter boxes I tried took forever to scan, channels missing,
analog TV worked great.
Most of the seniors already had their free box, obtained with the
converter box coupon.

Only boxes I have found so far that seem to work very well are the
DigitalStream  Zenith pass thru boxes, scan quickly, best picture on
rabbit ears. Cost more, but worth the price.

Below is a message from another user group, also detailing the
frustration in switching over to digital.

CJD

--- In mailto:lptv%40yahoogroups.coml...@yahoogroups.com, BB 
beazer...@... wrote:


 I went out to the home of an elderly couple having problem hooking
up their converter boxes. When I arrived, the man had set up the
boxes correctly. His problem - he was missing half of the stations
he had before! I ran the scan about 10 times. Each time it found
different stations. But very few of the UHF channels from Phx.

 According to www.antennaweb.org - he should be able to get them
all - plus some of the Tucson stations. He's getting the Tucson ones
that are 70 miles away, but not the Phoenix ones that are 30 miles
away. He's using an indoor set top antenna, the kind with the built
in amplifier. We tried different settings without much change.

 Weather conditions at the time - rain. I've noticed at my house
when it rains, some channels have severe pixelation.

 With the converter turned off, he gets all the Phoenix stations
analog signals just fine on that indoor antenna. But going through
the converter, he's missing a few of the incidental ones...ABC,
UPN...ION.

 Needless to say, he isn't too happy. It looks like unless we can
come up with a better option - he needs to call DISH. If Congress
wants to talk to an average consumer about what they think of digital
television - he'd give them an earful!
 Any ideas?
 Bea Lueck




[Repeater-Builder] FS: Motorola Service Monitor Plug-ins

2008-11-09 Thread John Sichert
I have 5 plug-ins for the Motorola 1200A / 1327 series service 
monitors. (Does anyone still use one?)

(1) Low band preselector
(2) High band preselectors
(2) Audio synthesizers

They are sold as-is. They look clean.

$20 each or $75 for all, plus shipping.

Thanks
John




Re: [Repeater-Builder] Duplexer Cabinets

2008-02-09 Thread John Sichert
Southern Maryland.


At 02:13 AM 2/10/2008, you wrote:
At 12:32 PM 02/09/08, you wrote:
 Hi all,
 
 I have a couple of duplexer cabinets if anyone is looking for those. No
 duplexer, just the cabinet they go in. Sinclair 202 and DB 4060 types
 are avaialble. Contact me off list if interested.
 
 Dwayne Kincaid
 WD8OYG

Location?

Mike






Yahoo! Groups Links






Re: [Repeater-Builder] IFR COM-120A Manual

2007-05-24 Thread John Sichert
lweter,

I know where I can get a COM-120B manual. I am not sure what the difference is.
The service manual is $50 + shipping.

John


At 11:09 AM 5/24/2007, you wrote:
I just recently acquired a used IFR 120A but it needs calibration and
a manual. Does anyone know where I can obtain some version of the IFR
COM-120A oeprations manual for a reasonable price if not free?






Yahoo! Groups Links






Re: [Repeater-Builder] Micor 375 Watt TLD5082 question?

2006-02-23 Thread John Sichert
TLD5081 = Gold
8560s (D02) = Silver
1/4 KW Micor on 2 = Priceless



At 06:36 PM 2/23/06, you wrote:
I have a TLD5081 amp that is not currently in service. Unfortunately, it is
not for sale, but I could take some digital photos of the internals and get
them to you. Just let me know what areas you would be interested in. It
is currently at a remote site, so it may take a few days to get them to you.
Let me know if are interested, and 73.

Kevin, K9HX







Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 




[Repeater-Builder] MASTR III Info Needed

2006-01-26 Thread John Sichert
Anyone have any info on moving Hi Band  UHF MASTR III base stations into 
the ham band?
I think they are 150-174  450-470.

Thanks
John






 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 




Re: [Repeater-Builder] Re: Motorola R-1200 Service Monitor

2006-01-01 Thread John Sichert
Is it the same used in a 1327?

John


At 12:19 PM 1/1/06, you wrote:

   I like it. . if only I could find it.

   I know that problem quite well.  How large is your garage?

   An extremely few of you have visited here.  ;)

   Neil - WA6KLA

k0jxi wrote:
 
  That is a good idea.  They xtal still works but the oven quit.
  You can warp in on freq but there would not be much freq stability.
  It looks like a TO220 transistor shorted blowing a resistor that
  was in series with the 110 supply.  I have a 1 mhz TCXO I bought
  on a whim a number of years ago if I could only find it.
 
  Thanks, Dale
 
  --- In Repeater-Builder@yahoogroups.com, Neil McKie [EMAIL PROTECTED]
  wrote:
  
  
 If all else fails, you might consider a gold Motorola Channel
Element as a replacement.
  
 From International Crystal, should be guaranteed to 0.0002% (2
  ppm)
tolerance - still better than no crystal reference at all.
  
 Just a thought,
  
 Neil - WA6KLA
  
   k0jxi wrote:
   
Looking to buy the 1.0 Mhz reference oscilator.  Mine failed and
looking for a replacement.  This one is the square octal plug in
assumbly.  Anyone having a dead 1200 that wants to sell parts let
me know.
   
Also, anyone familar with the failure modes of the oven  in this
unit contact me off site at [EMAIL PROTECTED] for a quick
discusion.  Would like to get some idea to see if it is
  repairable.
   
Appreciate any help.
   
Thanks, Dale K0jxi
   
  
 
 
  Yahoo! Groups Links
 
 
 
 






Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 




Re: [Repeater-Builder] Re: Spectrum Communications Corp

2005-11-08 Thread John Sichert
You would probably be better off if they never shipped it.
At least you could put a claim in with your credit card company, and get a 
real radio, instead of one that takes up the entire Spectrum.
If you do get it, make sure you have a spectrum analyzer as part of your 
test gear. They don't call it a spectrum analyzer for nothing.

Good Luck
John


At 12:15 PM 11/8/05, you wrote:
--- In Repeater-Builder@yahoogroups.com, kk4pg [EMAIL PROTECTED] wrote:

I recently purchased a repeater from Spectrum ...


Condolences









Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 





Re: [Repeater-Builder] Re: ...Who will be next! Dean...

2005-03-25 Thread John Sichert


If ever there was a question with a built in answer

:)






Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 





Re: [Repeater-Builder] Re: Kenwood Repeater

2004-09-19 Thread John Sichert

Is it possible, that it was a case of too many hands trying to make it work 
better?

240W soldering gun?
The slugs were loose, they needed to be tightened?
The reset beep was the wrong tone, the repeater had to be modified to fix it?

That might be some of the reasons I could think of why Kenwood would not 
repair the repeater.
NOT saying that was the situation, I don't think Kenwood would consider 
that a lemon.

Could you tell us how many different people have worked on the repeater?
What was the exact problem that Kenwood did not fix?



At 07:52 PM 9/15/04, you wrote:
I agree with John and Greg,

Myself an Authorized Kenwood Dealer... will try to
resolve any proper Kenwood technical issue. I have
both bad and good stories for all radio brands,
including the big M.   I'd say it's probably more
your local Radio Dealer than the brand.

cheers
skipp
www.radiowrench.com


  W9DHI [EMAIL PROTECTED] wrote:
  Steve I think you have more than a problem with Kenwood…it's
either your
  dealer or the way the situation was handled.  I was a Kenwood
dealer for
  over 20 years (retired last year), and Kenwood was always responsive
to our
  needs.  I've had LEMONS from every manufacturer including Kenwood
and
  never had a problem with them replacing the unit…no matter what
it
was…if I
  said I wanted it exchanged..they exchanged it.  There has been a lot
of talk
  of buying from Kenwood Dealers that don't service their equipment
but send
  it in to the Depot.  Personally I would never deal with a company
that
  didn't have the technical expertise to maintain and repair the
equipment
  they sold.  We always repaired all the equipment we sold IN HOUSE,
except
  for DOA's which we promptly got an exchange for the unit or a credit
to our
  account.
 
 
 
  So all of that said…I really don't think Kenwood was the
problem….it was
  whoever was in-between and apparently whomever you purchased the
unit from
  apparently is one of these companies that doesn't SERVICE WHAT THEY
SELL.
 
 
 
  If they can't service it, then they shouldn't sell it…..end of
story.
 
 
 
 
 
  Gregg R. Lengling, W9DHI, Retired
  Administrator http://www.milwaukeehdtv.org
  K2/100 S#3075 KX1 S# 57
  Member:  ARRL, RSGB, RCA, WERA and ORC
 
 
 
  NØATH
 
  CLIP
 
  It may help to point out that we have several members of our team
who have
  years of experience with commercial two way. We have all of the
appropriate
  equipment and operate a number of other repeaters in the Greater
Cincinnati
  area on Amateur, commercial, Public Safety and GMRS. Needless to say
we no
  longer own anything Kenwood since we need things we can rely on and
a
  manufacturer that we can rely on to honor their warranty. Kenwood
does not
  do fit that criteria.
 
 
 
  Capt. Steve Helton
 
  Communications Division
 
  Emergency Support Services
 
  Federal Emergency Management Agency
 
  Cincinnati CERT Task Force
 
  * [EMAIL PROTECTED]






Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 






Re: [Repeater-Builder] Voters

2004-09-15 Thread John Sichert
Jamey,

If you did read through that thread, why would you still be using status 
tone to indicate a COR signal?

John


At 08:13 PM 9/14/04, you wrote:

A while back, there was some discussion on voters.  I have read through all
of that.  I am looking to install one here.  I am planning on bringing my rx
sites back on RF and having the rx radios at the voter site interface to a
status tone (2175 Hz) circuit and then feed the voter.  My question is:
Does anyone have a circuit to generate the status tones or know of a
reasonably priced commercially available product.  I just don't want to
re-invent the wheel if someone else has already dealt w/ this.

Jamey Wright
KD4SIY







Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 




Re: [Repeater-Builder] UHF Micor RX

2004-08-06 Thread John Sichert
Kevin,

Increasing the cap gives a little more injection, it does make a difference.

I never saw a response if the receiver is working now.

John



At 08:46 PM 8/5/04, you wrote:

   Comes off the collector of the 3rd doubler - a coupling capacitor
  to the L106/L107/L108 Injection Filter - factory says it is a
  2.7 pf.

   Neil - WA6KLA

Kevin Custer wrote:
 
  John Sichert wrote:
 
  Did the RX have rated sensitivity on the original operating frequency?
  If not, Q104 may be bad.
  If so, try replacing C138 with a 4.7pf.
  
  John
  
 
  Hey John,
 
  What does that capacitor change actually do?  I don't have my UHF book
  here to look and see.
  Maybe this should be added to the conversion page?
 
  Kevin Custer
 
 
  Yahoo! Groups Links
 
 
 
 






Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 




Re: [Repeater-Builder] IFR Monitor Repair Charges

2004-04-27 Thread John Sichert
Eric,

Are the repair rates model specific?

Thanks
John


At 01:04 AM 4/27/04, you wrote:
I received the following statement from Aeroflex/IFR this morning,
regarding their current fees:

The current fee for a non-traceable calibration is $250.00 and a NIST
calibration is $500.00.  The flat-rate repair includes one major repair
and a non-traceable calibration for $1,275.00.  The flat-rate repair
includes one major repair and an NIST calibration for $1,525.00.  Please
note that if more than one repair is needed, the price will be based on
a time and material charge.

73, Eric Lemmon WB6FLY





Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
 http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
 [EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/
 




RE: [Repeater-Builder] RBI-1 Serial interface and FC-1

2004-02-05 Thread John Sichert
-I like the way the synthesized speech sounds...-

When you can have .wav files, hmmm.

John



  Our RC-210 will control these radios directly

I have been considering that for a while. I REALLY don't want to change
controllers because I like my 7k and the way the synthesized speech
sounds. If push comes to shove, I will do that. I also may use an RC-110
as an interface controller.

73, Stephen





-Original Message-
From: Ken Arck [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 04, 2004 8:18 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] RBI-1 Serial interface and FC-1

At 04:10 PM 2/4/2004 -0500, you wrote:
There has got to be more than just the FC-1 protocol that drives the
RBI-1
such as remote high/low power, dc power on/off, etc.


I hope you don't mind me answering here, as everyone can benefit
from
information, yes? When driven by the ACC FC-1 format serial stream,
you
do not get the fully functionality of the RBI-1 (I believe this is
mentioned in their manual.) You'd need to read that in detail to see
exactly what does and doesn't work when an RBI-1 is used with the FC-1
stream.

AH6LE uses the FC-1 for his serial converter to drive the Kenwood G707.

Not exactlyg. My serial stream converter was designed to allow an
ACC controller (or similar controller that provides the ACC FC-1
protocol)
to control *some* of the functions in those Kenwood mobiles that allow
control via DTMF injected into the mic port. While the G707 is one of
those
(as is the 732, V7A and some others), I didn't design the converter for
any
particular radio. With it, you can program frequency, PL freq, xmt
offset
and encode/decode select. And interjecting a shameless plug, our RC-210
will control these radios directly, without the need for an RBI-1 or any
other converter. I'll let someone else provide the info on the
capabilities
of other controllers.

That is what I am trying to do with my SCOM-7k. It uses the Doug Hall
RBI-1
serial stream. Is this public? I need to make it fully frequency agile,
PL
agile, etc.

---All I can offer here is if you're not sure if the RBI-1 will control
a
G707, why not simply contact Doug Hall directly and ask? Then again as
others have mentioned, maybe there's a way to use your 7K as it is.
There
are lots of knowledgeable folks on this list.

Ken


--
President and CTO - Arcom Communications
Makers of state-of-the-art repeater controllers
and accessories.
http://www.ah6le.net/arcom/index.html
Our new Repeater Audio Delay (RAD) board is now shipping!
Compatible with many controllers!
AH6LE/R - IRLP Node 3000
http://www.irlp.net





Yahoo! Groups Links

To visit your group on the web, go to:
  http://groups.yahoo.com/group/Repeater-Builder/

To unsubscribe from this group, send an email to:
  [EMAIL PROTECTED]

Your use of Yahoo! Groups is subject to:
  http://docs.yahoo.com/info/terms/









Yahoo! Groups Links










 
Yahoo! Groups Links

* To visit your group on the web, go to:
 http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
 [EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/
 




Re: [Repeater-Builder] GE CUSTOM MVP Ant Relay

2004-01-19 Thread John Sichert
Gran,

The MASTR IIs had a sensitivity problem that was caused by plating 
differences between the tuning slugs and the casting. Small hairs would 
grow inside the deck. I believe the MVP had the same problem.
GE sold some black goo that you put on the slugs to improve the continuity.
I don't know if it would cause such a drastic sensitivity change, but you 
might want to rock the slugs to see if the receiver sensitivity jumps.

As far as the relay is concerned, I have not worked on that many to know if 
it is a high failure item.

John


At 08:39 PM 1/19/04, you wrote:
Hi Group

The club has a CUSTOM MVP  (UHF) used as a simplex link.  It appears to be
intermittent on RX.  The sensitivity drops from full quieting to almost
readable.  We planed a trip (300mi RT) today but the RX fixed itself.

We are using the antenna relay in this situation.  How is the reliability
of that relay?  It is hermetically sealed?  Is this a reed relay?

Gran K6RIF






Yahoo! Groups Links

To visit your group on the web, go to:
  http://groups.yahoo.com/group/Repeater-Builder/

To unsubscribe from this group, send an email to:
  [EMAIL PROTECTED]

Your use of Yahoo! Groups is subject to:
  http://docs.yahoo.com/info/terms/





 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/Repeater-Builder/

To unsubscribe from this group, send an email to:
 [EMAIL PROTECTED]

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/