[Repeater-Builder] GE ORION PROGRAMMING CABLE

2010-05-14 Thread Robert Kafarski 
ANYBODY HAVE THE RIGHT PIN OUT FOR THE DB25 THAT GOES TO THE TQ3370 RIB BO. NOT 
THE ONE FROM HALL ELETRONICS THANKS BOB

Re: [Repeater-Builder] 6 Mtr GE PA

2009-06-15 Thread Robert Kafarski 
i'll take it

--- On Sun, 6/14/09, aa4ji  wrote:


From: aa4ji 
Subject: [Repeater-Builder] 6 Mtr GE PA
To: Repeater-Builder@yahoogroups.com
Date: Sunday, June 14, 2009, 10:00 PM








For sale my 260 watt Ge Pa. is very narrow banded for 6mtrs only. good db 
suppresion best filtering available built in. Solid State 4 output finals with 
65 watt driver. can be driven at 1-3 watts or by pass the first driver and 
drive with upt to 35 watts. either way is full output. I am asking $100 plus 
$30 shipping I use Pay Pal. 73 larry aa4ji.

Re: [Repeater-Builder] Re: MIRAGE B3030 G

2009-04-21 Thread Robert Kafarski 
HI ALLAN. THAT' IS WHY IT WAS PROBABLY GIVEN TO ME? NICE HEAT SINK ANYWAY. 
MAYBE I SOULD TRY BUILDING ONE OF THOSE NEW FET AMPS "MRF151G"  THEY SEEM 
SMIPLE ENOUGH.  TNX 73 BOB K2NK

--- On Tue, 4/21/09, porcupine357  wrote:


From: porcupine357 
Subject: [Repeater-Builder] Re: MIRAGE B3030 G
To: Repeater-Builder@yahoogroups.com
Date: Tuesday, April 21, 2009, 9:12 AM








--- In Repeater-Builder@ yahoogroups. com, Robert Kafarski  
wrote:
>
> 
> HELLO. HAS ANYBODY ON THE GROUP WORKED ON ONE OF THESE 2 METER AMPLIFIERS? 
> THIS ONE SEEMS TO HAVE LOW OUTPUT. TRANSISORS ARE GOOD. IF SOMEONE ON THE 
> GROUP HAS A PRINT THAT THEY CAN EMAIL? THAT WOULD BE GREAT! TNX 73 BOB
>
Bob, I have attempted to work on these in the past and could not find prints 
and found Mirage unable to provide any...something about not having prints 
after a buyout or such...a lot of their products seem to be problematic. ..may 
not be worth your time.
-Allan, W8FYZ

[Repeater-Builder] MIRAGE B3030 G

2009-04-20 Thread Robert Kafarski 

HELLO. HAS ANYBODY ON THE GROUP WORKED ON ONE OF THESE 2 METER AMPLIFIERS? THIS 
ONE SEEMS TO HAVE LOW OUTPUT. TRANSISORS ARE GOOD. IF SOMEONE ON THE GROUP HAS 
A PRINT THAT THEY CAN EMAIL? THAT WOULD BE GREAT! TNX 73 BOB

Re: [Repeater-Builder] MARATRAC

2009-03-25 Thread Robert Kafarski 
HI BOB! NO LUCK 73 BOB

--- On Wed, 3/25/09, Bob M.  wrote:


From: Bob M. 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, March 25, 2009, 4:44 PM







Version 5 is "out there" on some web sites. It might be worth trying to find 
it. Then things will line up.

Bob M.
==
--- On Wed, 3/25/09, Robert Kafarski  wrote:

From: Robert Kafarski 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 3:16 PM

HI BOB! NO VERISON 4.03  THE HEX EDITOR IS INTEL BYTE ORDER.THANKS BOB
--- On Wed, 3/25/09, Bob M.  wrote:

From: Bob M. 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 2:32 PM

Are you working with the same RSS version: R05.00.00g dated 20-Dec-96?

Do you have your hex editor set to INTEL byte-order (little Endian)?

Unfortunately you can't just replace one value with another throughout the 
entire file, as not all locations with a specific value need to be changed.

Bob M.
==
--- On Wed, 3/25/09, Robert Kafarski  wrote:

From: Robert Kafarski 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 2:16 PM

HI BOB! NOTHING CLOSE TO WHAT I SEE ON REPEATER BUILDER.  THANKS BOB

--- On Wed, 3/25/09, Bob M.  wrote:

From: Bob M. 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 10:54 AM

If the locations don't match, search for the original data values. They'll 
probably be very close to the locations in the article, or offset by some fixed 
amount that will be consistent for the other addresses too.

Unless of course someone already hex-edited the version you have, in which case 
the values won't be the same no matter what you do.

Bob M.
==
--- On Wed, 3/25/09, Robert Kafarski  wrote:

From: Robert Kafarski 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 7:52 AM

HI MIKE. I TRIED  THE INFO ON REPEATER BUILDER. THE HEX ADDRESS DOES NOT MACH 
UP.   ..73 BOB

--- On Tue, 3/24/09, Mike Morris WA6ILQ  wrote:

From: Mike Morris WA6ILQ 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Tuesday, March 24, 2009, 3:51 PM

At 04:45 AM 03/24/09, you wrote:
>HELLO GROUP! ANY BODY OUT THERE THAT CAN HELP ME WITH PROGRAMMING A 
>MARATRAC TO SIX METERS? THANKS BOB

See <http://www.repeater -builder. com/motorola/ maratrac/ maratrac. html>
especially the section on the 6m conversion.

Mike WA6ILQ

Re: [Repeater-Builder] MARATRAC

2009-03-25 Thread Robert Kafarski 
HI BOB! NO VERISON 4.03  THE HEX EDITOR IS INTEL BYTE ORDER.THANKS BOB
--- On Wed, 3/25/09, Bob M.  wrote:


From: Bob M. 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, March 25, 2009, 2:32 PM







Are you working with the same RSS version: R05.00.00g dated 20-Dec-96?

Do you have your hex editor set to INTEL byte-order (little Endian)?

Unfortunately you can't just replace one value with another throughout the 
entire file, as not all locations with a specific value need to be changed.

Bob M.
==
--- On Wed, 3/25/09, Robert Kafarski  wrote:

From: Robert Kafarski 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 2:16 PM

HI BOB! NOTHING CLOSE TO WHAT I SEE ON REPEATER BUILDER.  THANKS BOB

--- On Wed, 3/25/09, Bob M.  wrote:

From: Bob M. 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 10:54 AM

If the locations don't match, search for the original data values. They'll 
probably be very close to the locations in the article, or offset by some fixed 
amount that will be consistent for the other addresses too.

Unless of course someone already hex-edited the version you have, in which case 
the values won't be the same no matter what you do.

Bob M.
==
--- On Wed, 3/25/09, Robert Kafarski  wrote:

From: Robert Kafarski 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 7:52 AM

HI MIKE. I TRIED  THE INFO ON REPEATER BUILDER. THE HEX ADDRESS DOES NOT MACH 
UP.   ..73 BOB

--- On Tue, 3/24/09, Mike Morris WA6ILQ  wrote:

From: Mike Morris WA6ILQ 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Tuesday, March 24, 2009, 3:51 PM

At 04:45 AM 03/24/09, you wrote:
>HELLO GROUP! ANY BODY OUT THERE THAT CAN HELP ME WITH PROGRAMMING A 
>MARATRAC TO SIX METERS? THANKS BOB

See <http://www.repeater -builder. com/motorola/ maratrac/ maratrac. html>
especially the section on the 6m conversion.

Mike WA6ILQ

Re: [Repeater-Builder] MARATRAC

2009-03-25 Thread Robert Kafarski 
HI BOB! NOTHING CLOSE TO WHAT I SEE ON REPEATER BUILDER.  THANKS BOB

--- On Wed, 3/25/09, Bob M.  wrote:


From: Bob M. 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, March 25, 2009, 10:54 AM







If the locations don't match, search for the original data values. They'll 
probably be very close to the locations in the article, or offset by some fixed 
amount that will be consistent for the other addresses too.

Unless of course someone already hex-edited the version you have, in which case 
the values won't be the same no matter what you do.

Bob M.
==
--- On Wed, 3/25/09, Robert Kafarski  wrote:

From: Robert Kafarski 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Wednesday, March 25, 2009, 7:52 AM

HI MIKE. I TRIED  THE INFO ON REPEATER BUILDER. THE HEX ADDRESS DOES NOT MACH 
UP.   ..73 BOB

--- On Tue, 3/24/09, Mike Morris WA6ILQ  wrote:

From: Mike Morris WA6ILQ 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@ yahoogroups. com
Date: Tuesday, March 24, 2009, 3:51 PM

At 04:45 AM 03/24/09, you wrote:
>HELLO GROUP! ANY BODY OUT THERE THAT CAN HELP ME WITH PROGRAMMING A 
>MARATRAC TO SIX METERS? THANKS BOB

See <http://www.repeater -builder. com/motorola/ maratrac/ maratrac. html>
especially the section on the 6m conversion.

Mike WA6ILQ

Re: [Repeater-Builder] MARATRAC

2009-03-25 Thread Robert Kafarski 
HI MIKE. I TRIED  THE INFO ON REPEATER BUILDER. THE HEX ADDRESS DOES NOT MACH 
UP.   ..73 BOB

--- On Tue, 3/24/09, Mike Morris WA6ILQ  wrote:


From: Mike Morris WA6ILQ 
Subject: Re: [Repeater-Builder] MARATRAC
To: Repeater-Builder@yahoogroups.com
Date: Tuesday, March 24, 2009, 3:51 PM






At 04:45 AM 03/24/09, you wrote:
>HELLO GROUP! ANY BODY OUT THERE THAT CAN HELP ME WITH PROGRAMMING A 
>MARATRAC TO SIX METERS? THANKS BOB

See 
especially the section on the 6m conversion.

Mike WA6ILQ

Re: [Repeater-Builder] Only Two Left

2009-03-20 Thread Robert Kafarski 
HI DOUG JUST ADD IT TO MY PILE

--- On Fri, 3/20/09, dadavies3  wrote:


From: dadavies3 
Subject: [Repeater-Builder] Only Two Left
To: Repeater-Builder@yahoogroups.com
Date: Friday, March 20, 2009, 2:24 PM






I have just two manuals left. One for the Motorola Mocom 70 138-174 MHz. and 
one for the GE Custom Exec 150.8-174 MHz. Both are free, just pay the postage. 
Please let me know off list if interested.

Doug VE7DRF

Re: [Repeater-Builder] More Manuals - Mastr Pro Binder Found

2009-03-18 Thread Robert Kafarski 
i'll take it

--- On Wed, 3/18/09, Doug & Kathy Davies  wrote:


From: Doug & Kathy Davies 
Subject: [Repeater-Builder] More Manuals - Mastr Pro Binder Found
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, March 18, 2009, 6:08 PM






I just found a three-ring binder full of manuals for the classic old GE 
Mastr Pro series. It's about 3" thick. I'm giving it away also. Just pay 
the postage. Let me know off list if interested. First come, first served. 
It contains the following:

--Excerpts from the WB4TUR Mastr Pro Website
--ET54A 25-50 MHz. 35W transmitter manual
--ET57A&B 132-174 MHz. 30W transmitter manual
--ET58F&K 132-174 MHz. 90W transmitter manual
--ET58A&B 132-174 MHz. 80W transmitter manual
--ET85A 132-174 MHz. 35W transmitter manual
--ET59C 406-470 MHz. 35W transmitter manual
--ET59F 450-470 MHz. 12W transmitter manual
--ET60C 406-470 MHz. 70 W transmitter manual
--ET59D 406-470 MHz. 35W transmitter manual
--ET60D 406-470 MHz. 70W transmitter manual
--ER39C 25-50 MHz. receiver manual
--ER41C&E 132-174 MHz. receiver manual
--ER41A 132-174 MHz. receiver manual
--ER42E&G 406-470 MHz. receiver manual
--EP38A10 117vac power supply manual
--EP38A11 117vac power supply manual
--EP38A12 117vac power supply manual
--EP58A power regulator manual
--Power Reduction Charts (for reducing RF output power)
--Desk Mate station combinations manual
--25-50 MHz. Station Combinations manual
--KC19A Base Station Repeater Control Panel manual
--EX3A11 Portable Test Set manual

Doug VE7DRF