Re: [Repeater-Builder] maxar 80 5 watt
Title: Re: [Repeater-Builder] maxar 80 5 watt any news yet randy ? Russ N3TIH - Original Message - From: Randy Elliott To: Repeater-Builder@yahoogroups.com Sent: Friday, April 09, 2004 10:39 AM Subject: Re: [Repeater-Builder] maxar 80 5 watt Hi RussI scanned the schematic and sent it to your PM but it came back undelivered. Give me a couple of days, it's good Friday up here so we are doing the family visiting thing.Randy From: "Russell Filling" [EMAIL PROTECTED]Reply-To: Repeater-Builder@yahoogroups.comDate: Thu, 8 Apr 2004 22:16:00 -0400To: Repeater-Builder@yahoogroups.comSubject: Re: [Repeater-Builder] maxar 80 5 watt Randy did you find that file yet ??RussN3TIH - Original Message - From: Randy Elliott mailto:[EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, April 05, 2004 5:05 PMSubject: Re: [Repeater-Builder] maxar 80 5 wattHi RussThese radio do not have a cos out but I have one that I have moded for our club's 440 repeater. I will send you the info but it won't be today just start my night shift. Will try to get it to you tomorrow. RandyRandy Elliott VE3JPUTechnical DirectorSouth Pickering Amateur Radio Club Inc.Box 53Pickering, Ontario, CanadaL1V 2R2From: "Russell Filling" [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.comDate: Mon, 5 Apr 2004 13:53:58 -0400To: Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED]Subject: [Repeater-Builder] maxar 80 5 watt i plan on using a pair of maxar 80 5 watt uhf crystaled radios as a portable repeater , we have a phelps dodge flat pack 50 watt max duplexer and , a Workingman UVS 300 11.3 dbi antenna ,and an ICS- basic 9 controller , so what i need to know is what are the pin outs on the back of the maxars ,this is the info off the sticker onthe heat sink for the radio Fcc TX Data :cc4319fcc rx data rc0206serial: 475fnc0482model :d04tsa3000bk"maxar 80" motorola incit has 2 14 ga female pins for power , 13.8 vdcthen , 15 18 ga female pins ,ineed a basic pin assignment and hopefully the radio has a COS out .RussN3TIH Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service http://docs.yahoo.com/info/terms/ . Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service http://docs.yahoo.com/info/terms/ . Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] RC-1000 schematic
lee , i had to add an external dual relay totheptt circuit on the rc-1000 , the opencollector only switches about 20 ma , so what i did , was tap 5vt off the output of the voltage reg in the controller toa 5 volt reed relat that drives a 12 volt relay to key the tx strip , the dual relay can switch up to a 3 amp load Russ N3TIH - Original Message - From: Q [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, April 10, 2004 12:42 PM Subject: [Repeater-Builder] RC-1000 schematic I'm trying to add a remote base to my RC-1000 but the controller won't send any PTT. Anyone have a schematic for this model? Thanks,73,Lee,N3APP Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] maxar 80 5 watt
Title: Re: [Repeater-Builder] maxar 80 5 watt Randy did you find that file yet ?? Russ N3TIH - Original Message - From: Randy Elliott To: Repeater-Builder@yahoogroups.com Sent: Monday, April 05, 2004 5:05 PM Subject: Re: [Repeater-Builder] maxar 80 5 watt Hi RussThese radio do not have a cos out but I have one that I have moded for our club's 440 repeater. I will send you the info but it won't be today just start my night shift. Will try to get it to you tomorrow. RandyRandy Elliott VE3JPUTechnical DirectorSouth Pickering Amateur Radio Club Inc.Box 53Pickering, Ontario, CanadaL1V 2R2From: "Russell Filling" [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.comDate: Mon, 5 Apr 2004 13:53:58 -0400To: Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED]Subject: [Repeater-Builder] maxar 80 5 watt i plan on using a pair of maxar 80 5 watt uhf crystaled radios as a portable repeater , we have a phelps dodge flat pack 50 watt max duplexer and , a Workingman UVS 300 11.3 dbi antenna ,and an ICS- basic 9 controller , so what i need to know is what are the pin outs on the back of the maxars ,this is the info off the sticker onthe heat sink for the radio Fcc TX Data :cc4319fcc rx data rc0206serial: 475fnc0482model :d04tsa3000bk"maxar 80" motorola incit has 2 14 ga female pins for power , 13.8 vdcthen , 15 18 ga female pins ,ineed a basic pin assignment and hopefully the radio has a COS out .RussN3TIH Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service http://docs.yahoo.com/info/terms/ . Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] This is serious, yeah right!
my room mate says after reading that , he understands why now when he passes the comm tower on county park , and he see the collision lights he has to run out and buy new nike's ! LMGDAO ! , its dat though to see that some fanatics actually believe in this hoakie bs , but its good amusement for the amateur thats inot mind controll HI HI Russ N3TIH Bill N3RXS - Original Message - From: Paul Finch To: Repeater-Builder@yahoogroups.com Sent: Friday, April 09, 2004 12:06 PM Subject: [Repeater-Builder] This is serious, yeah right! Hello, Someone found this URL over on a Tower related message board, thought you guys may like to see this and what kind of nut cases are out there that are doing whatever they can to disrupt the tower industry. Check out the web address below. Paul http://www.tearingdownstrongholds.com/ Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] UHF Mitrek
corey why dont u call past me and call gregg in townada , wa3ggs , foster communications , hes the motorola man , anyhow good to see a local on the list also , talk to ya soon Russ N3TIH - Original Message - From: Corey Dean [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: repeater-builder@yahoogroups.com Sent: Thursday, March 25, 2004 9:06 AM Subject: [Repeater-Builder] UHF Mitrek I have been meaning to ask this question for a few days and always seem to get caught up in something else. How far down in freq will the 450-470 mitrek go? Will it do a 434 TX and a 439 RX?. I don't have the model numbers with me right now to be able to post them. One is a 30 watt I believe and the other I have is the plus version and has a 50 watt PA. Not sure which one I am going to use. I will need to see how low in freq they can go. Corey N3FE Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: GE phoenix UHF
just out of curiosit , how do u program a crystal ? i have a crystaled GE phoenix , not one with a x2122 in it , i need to know the frequency mutliplier Russ N3TIH - Original Message - From: wavecomm1 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, March 23, 2004 11:44 PM Subject: [Repeater-Builder] Re: GE phoenix UHF need the programmer? Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: GE phoenix UHF
lol what dont believe in the toothpaste deal and the week of rubbing ? LOL Russ N3TIH - Original Message - From: Rick - VA3RZS/Charlotte - VA3CMR [EMAIL PROTECTED] To: Russell Filling [EMAIL PROTECTED]; Repeater-Builder@yahoogroups.com Sent: Wednesday, March 24, 2004 8:43 AM Subject: Re: [Repeater-Builder] Re: GE phoenix UHF I can only tune a xtal up in freq with a small hammer and a grinder :) On 24 Mar 2004 at 7:42, Russell Filling wrote: just out of curiosit , how do u program a crystal ? i have a crystaled GE phoenix , not one with a x2122 in it , i need to know the frequency mutliplier Russ N3TIH - Original Message - From: wavecomm1 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, March 23, 2004 11:44 PM Subject: [Repeater-Builder] Re: GE phoenix UHF need the programmer? Yahoo! Groups Links Yahoo! Groups Links Rick Szajkowski VA3 RZS Charlotte Darby VA3 CMR Node Owners of IRLP Node 2120 Lakefield Ont Canada Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Motorola Maxar 80
can some one give me a quick tech referenceon the Maxar 80 uhf radios , what i need to know is PLL or XTAL , and Wattage ,and if they have hardwired mic's or a mic plug some where , i havent got the radios yet they are still in shipment , i just need to know the basics info on them , thanks Russ N3TIH Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Voltage in an Mpro Ge deskmate
is it possible to actually read 1662 volts AC on a 600 volt digital meter by putting ground lead of meter on chassis , and the red one on pin 1 then pin 9 in the ET-60 TX strip , this doesnt seem possible to me bit i double checked my house current and it read 117 volts , as normal , can some one explain this to me ??? im trying to chase out the 600 voltsto see if i have a voltage problem or if the 8106 / 8156 / 8072 tubes are bad , and again stated the output is only about 2 watts and its a 60 watt tx , but lacks 58 watts lol Russ N3TIH Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] M pro Ge deskmate
ya i got it , it was dc and its throwing 742 voilts but i think i found the reason forno out put , dead but glowing 8156 and 8106 , the thing im worried about is that 8072 being bad , in finding that the cabinate was dropped 8 inches on a concrete deck , im pretty mad but i think the damage is done so im gonna retube it if i can find those 3 , net searches tell me im gonna spendbetween 85 -185 for a 8072 and 15 -18 for a 8156 , and 9 -11 for a 8106 tube , kinda heartbreaking considering its in operation at 2 watts right nowat l;east the transistors are good :) im trying to find the hpaainess in the whole deal , that ive put many man hrs in this from getting it getting crystals ,then the controller , then the antenna , then the feedline ,and then finally building the outboard keying circuit to get it all working , and now dead tubes , but hey its a commercial rig and at least 30 yrs old , so its off for a parts hunt now !! - Original Message - From: Q [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, March 15, 2004 9:08 PM Subject: Re: [Repeater-Builder] Voltage in an Mpro Ge deskmate Isn't it supposed to be on DC??? - Original Message - From: Ralph Mowery [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, March 15, 2004 9:53 PM Subject: Re: [Repeater-Builder] Voltage in an Mpro Ge deskmate is it possible to actually read 1662 volts AC on a 600 volt digital meter by putting ground lead of meter on chassis , and the red one on pin 1 then pin 9 in the ET-60 TX strip , this doesnt seem possible to me bit i double checked my house current and it read 117 volts , as normal , can some one explain this to me ??? im trying to chase out the 600 voltsto see if i have a voltage problem or if the 8106 / 8156 / 8072 tubes are bad , and again stated the output is only about 2 watts and its a 60 watt tx , but lacks 58 watts lol Russ N3TIH If the voltage is read while transmitting, it is RF getting into the meter. Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] MCC RC-1000V to Ge Mpro UHF
ok , ive spent the last 8 hrs now bouncing back and fourth between the pc here and this GD(*^# , RC-1000V , im about fed up with its tech support in flordia too , has anyone else messed with programming it through the radio , im convinced now the COS isnt tripping the controller , it says tie high 2-30 volts ,and tie low 0.0 - 0.5 volts , but holy hell , i just cant seem to get the micro computer in the controller to respond tothe dtmf , and it wount reset by grounding pin 7 now , so i have a $200 Cigar ash box ...and further more what is this Hex to Dec conversion table the manual keeps refering to , its not a starndard one cause 3C = 60 and if it goes by 10 sec intervals thats 10 min not 8 min and 8 min is 48 or 30 in hex , so where doed his hex chart fit in , im really getting lost and am almost tothe point to not recomend this product to anyone else Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] UHF GE MPro
Well i got good news and bad new s ,, #1 the good the crystals came today $60 for the pair , the controller came ups 3 days ago , MCC RC-1000V nice unit , no manualsshipped from the old club so i built the TX cable RCA to N male , and volia it works . :) now the bad 8156doesnt have the purple glow , checking tx powe a massive 3/4 watt output , peaked and tuned it today took 2 hrs by manual and DC volt meter , both digital and an old 1945 military analog meter , got a wopping 2 watts out off the exciter or atleast i think its exciter power , its a ET-60 tx strip that is single channel , no icoms ( thanks god im not ready for multi channel ) al lot of the tuning process said look for 20 volts i only found max of 19 , and the rest was look for 0.6 , some was 0.88 nd the rest were 0.35 - 0.49 volt , im beginning tothink bad caps and resistors , but on with that i removed the 8156 and found corroded silver , so some polish and pipe cleaner , done , still 2 watts , soo i beg of th , the great M pro techs , whats up where do i look next ! Russ N3TIH 444.450 canton pa , first 440 ! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] UHF GE MPro
yea it was about4 yrs ago when it was turned off ,and we recrystaled it for the vey same freqs just relocates some 150 north from its old QTH - Original Message - From: Steve S. Bosshard (NU5D) [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 13, 2004 9:40 PM Subject: RE: [Repeater-Builder] UHF GE MPro Was the station delivering rated output etc., before you started re-channeling? Ssb Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] UHF GE MPro
how dfo u test the output of a tube with out a aoc freq to drive the exciter ? now u have my attention !! - Original Message - From: Steve S. Bosshard (NU5D) [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 13, 2004 10:07 PM Subject: RE: [Repeater-Builder] UHF GE MPro Did you test it before you recrystalled it? Ssb (Immediately before) Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] MCC RC-1000V
anyone have a pinout diagram for the Micro Computer Concepts RC-1000V ita cute 25 pin connector but if i had a jpg or hi rez gif to show me what pins are what , it would be appreciated Russ N3TIH 444.450 Canton PA 's First 440 Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] MCC RC-1000V to Ge Mpro UHF
okim trying to hook the rc 1k up to the old GE crate .. the old controller box had a barrier strip with fork blades and scre term on it the rc 1k had a DB 25 , i followed the pinoutsper audio from rec , and audio to TX , ptt , and COS line , but what im having problems with is the blue and white wires for the ptt interlock disable off the repeater , , and when i turn the rc1k on the tx light on the tx disable module comes on but now ive lost all functionality of a repeater , and i dont hace a service mic to see if i can key the crate back up... how the hell does that intlerlock work , does it need to be grounded ? does it need the reg 12.6 v+ ? and im not even sure if i have the rightCOS line , the old club tech from the other club hasnt touched it in $ yrs and doesnt remember it at all , sooo anyone out ther could ya help me ??? im kinda lostconsideringthis is the first ever repeater of GE ive ever worked on and this is the first RC1K ive worked on , its a it different than the old cat 300's and motorola mocoms heheheh Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/