[Repeater-Builder] 2 x mini CTCSS encoders needed Please
Hi Guys and Girls. I need 2 mini encoders for our volunteer fire brigade hand helds. I could use good s/h as these are mainly used for monitoring but some times on air. Can you help I am in Australia. Cheers Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] AWA BS83/RT85 Midland Base or repeater manuals or help Please
I have been around in the game since 1976ish in Australia. AWA branded radios are a bit new to me. I say that but I do have a m2000 man pack uhf and a RT80 uhf (both had never missed a beat) that were used on my old Philips 828 repeater. This why I am looking to make up a multi channel UHF CB repeater using a BS83 and maybe squeezing it into the radio chassis not in the BS83 cabinet. I travel overseas (mainly Africa) from time to time and could use a repeater. I have a few of UHF Tait Orca handhelds so a repeater would extend the range. I have tried a 2 antenna system and it works OK so I will not need a huge diplexer system. Well cutting a long story short.\, I am looking for some help with manuals and any info that may help. You can contact me direct at [EMAIL PROTECTED] Cheers Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Antenna system 4 short term portable uhf repeater
Hi my learned freinds. I am interested if any body has tryed using 3db mobile whips mounted on a solid ground plain verticaly 180 degrees to each other and fed with separate coax to rx tx ports. I would use the top whip for tx and the lower for rx.This antenna would be mounted at the top of the mast so not to reflect the tx back into the rx antenna. The feeder would be double sheilded rg214 or similar. Do you believe this would give me enough attenuation. Thank you in advance for your help. Brett Down under. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Rx filter and shinwa radio prog help please
Hi learned friends. I have a few Qs that you may be able to help with. One: Can a very good notch filter be made from coax stub as I need to make one for each of the Aust cb chs approx 500 kHz spacings for a portable repeater. I am going to use a TX and an Rx feeder so I will not need a duplexer for each of the 8 repeater chs. The idea is to add the stub to the Rx feeder as needed. I will be using double shielded coax or may be some 1/2 " hardline. Two: I am looking for info on programming Shinwa 504g and 505g uhf and vhf Hand Helds. Three: FS or trade brand new HP aurora Tempo. I purchased it because I was told I needed it to comply with a overseas contract and as I fund out later that was a lot B.S. Thanks Brett Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] AWA bs83 based on Midland help please
Hi Wise Ones. I am looking for info on a manual for this repeater/base radio. Also Shinwa hand held manuals. Cheers Brett Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Remote monitoring of repeater site
Hello learned group members. Does anyone know anybody that has a remote site monitoring system, ie battery state, vswr, entry, generator start, fuel level etc. I have a site in Africa that has 3 remotes site that we need to monitor localing and if possible on a dial up modem from here in Australia.it will need to leap frog thru a parallel telemetry rf link. I can be contacted direct or thru the group. There was a system that I saw many years ago but the memory is not that good to go back to a flyer some 15/20 years ago. I need a solution asap. Cheers. Brett [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Motorola R2001 DC Cable pin outs
Hi Guys Can you help with the pin out of the 12v DC socket on the rear of the test set I am putting test set on a truck for the bush ASAP. Cheers Brett Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Hello to the group (making 2 hh radios into repeater)
Hi I am new to your group. I have been in the industry for over 25 years. I believe I can be a valueable member. I have a project on the go to build a repeater from 2 hand held radios ( 2 Icom ic-f3gs or 2 Midland 70-165-48b ). Does any one have info that can be of assistance. Thank you in advance. Cheers from OZ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
