[Repeater-Builder] Programming software for the RADIUS and MAXTRAC100
Please help, I am looking for a source to get Programming software for the RADIUS and MAXTRAC100 Radios. I have the RSS1225 Software but it will not work with these radios or RIB.. Any help is Appreceated.. --- Tommie Taylor Lampasas Skywarn Repeater 146.860- 88.5T (SWLynx) / 444.875+ 88.5 (Echolink) http://www.a1cmugs.com WEEKLY "CENTRAL TEXAS STORM SPOTTERS" Net TUESDAY EVENINGS AT 7PMCST ON REPEATER ABOVE AND ECHOLINK NODE#28689 Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[Repeater-Builder] NEED WTB
WANTED Anyone have a set of XTALS for ICOM 5C or EC GE MAter II vHF XTAL:12.111 Tx and 14.837 rx --- Tommie Taylor Lampasas Skywarn Repeater145.330- 162.2T (SWLynx) / 444.875+ 88.5 (Echolink) http://www.a1cmugs.comWEEKLY "CENTRAL TEXAS STORM SPOTTERS" NetTUESDAY EVENINGS AT 7PMCST ON REPEATER ABOVE AND ECHOLINK NODE#28689/28821 Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] NEED WTB
They are for my VHF Repeater.. 145.330T 144.730R --- Tommie Taylor Lampasas Skywarn Repeater 145.330- 162.2T (SWLynx) / 444.875+ 88.5 (Echolink) http://www.a1cmugs.com WEEKLY "CENTRAL TEXAS STORM SPOTTERS" Net TUESDAY EVENINGS AT 7PMCST ON REPEATER ABOVE AND ECHOLINK NODE#28689/28821 - Original Message - From: "Virden Clark Beckman" <[EMAIL PROTECTED]> To: Sent: Thursday, January 15, 2004 8:57 PM Subject: Re: [Repeater-Builder] NEED WTB > I think they start at 24MHz - what did you plan on fm down there? > > > [EMAIL PROTECTED] wrote: > > > > WANTED > > > > Anyone have a set of XTALS for ICOM 5C or EC > > > > GE MAter II vHF XTAL: > > > > 12.111 Tx and 14.837 rx > > > > --- > > Tommie Taylor > > Lampasas Skywarn Repeater > > 145.330- 162.2T (SWLynx) / 444.875+ 88.5 (Echolink) > >http://www.a1cmugs.com > > WEEKLY "CENTRAL TEXAS STORM SPOTTERS" Net > > TUESDAY EVENINGS AT 7PMCST ON REPEATER ABOVE > > AND ECHOLINK NODE#28689/28821 > > > > -- > 73...Clark Beckman N8PZD > > Pursuant to U.S. Code, title 47, Chapter 5, Subchapter II, ß227, > "Any and all nonsolicited commercial E-mail sent to this address > is subject to a download and archival fee of $500.00 U.S.". > E-mailing denotes acceptance of these terms. > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] IFR Monitor Repair Charges
I have a IFR 1200 that the power supply seems to have gone out.. anyone know someone that can repair this. thanks --- Tommie Taylor Lampasas Skywarn Weather Repeater 145.330- 162.2T (SWLynx) / 444.875+ 88.5 (Echolink) http://www.a1cmugs.com WEEKLY "CENTRAL TEXAS STORM SPOTTERS" Net TUESDAY EVENINGS AT 7PMCST ON REPEATER ABOVE AND ECHOLINK VoiceOverIP NODE#28689/28821 - Original Message - From: "Steve S. Bosshard (NU5D)" <[EMAIL PROTECTED]> To: Sent: Tuesday, April 27, 2004 6:43 AM Subject: RE: [Repeater-Builder] IFR Monitor Repair Charges > Same deal with large LMR factory depot - flat rate for one problem - more > problems MORE $$$s. > > Steve > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] FS: UHF 100W GE MASTR II Continious Duty Repeater PA
I am looking for a gE UHF pA, continious duty Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Help: GE M2 PL decode dropout on voice peaks and IDA control shelf
Thanks Steve REAL GOOD Information... TOMMIE --- TOMMIE EchoLink Coordinator for CTSSG "CENTRAL TEXAS STORM SPOTTERS GROUP" ( CTSSG ) WEEKLY CHECK IN ON THURSDAY 7PM CST (SEE BELOW) ECHOLINK NODE# 28821 (KC5YVU-R), and the " WX_TALK " Conference Lampasas Skywarn Freq: 145.330- 162.2T / 444.875+ 88.5T KC5YVU Temple Tx., Freq: 146.720- 88.5T, NU5D Steve, Linked to Lampasas Lampasas Local Freq: 147.220+ 88.5T, KB5SXV Harold " NOTE " Non-Hams Listen in on ICQ # 166128088 http://groups.yahoo.com/group/CenTexStormSpotters/join - Original Message - From: "Steve Bosshard (NU5D)" <[EMAIL PROTECTED]> To: Sent: Friday, December 24, 2004 6:07 PM Subject: RE: [Repeater-Builder] Help: GE M2 PL decode dropout on voice peaks and IDA control shelf > > Our Temple Texas ARC owns an Ericsson M3 2M repeater with 3 remote site > voting receivers using GE Phoenix mobiles for 438 Mhz voting receiver link > radios. We had lots of trouble with cheap ham radios chopping on voice > peaks for several reasons. > > Ericsson's philosophy is to use Channel Guard to prevent unwanted signals > from activating the repeater. They use dsp in the system module to decode > the Channel Guard tone. Ham talkies and mobiles chopped pretty badly. > Commercial radios did not. > > I found first of all that most off the shelf talkies, Icom W32, Yaesu, etc > generally had peak deviation set at +/- 6.5 Khz using voice modulation and > either my HP8921 or COM 120B to measure. Another generalization, ham > equipment uses tone and digital coded squelch as an after thought. No > voice > band filters the remove voice components below 300 hz. From the modulator > causing the voice modulation low frequency components to compete with > Channel Guard tones. Add to this a little excessive transmitter deviation > and the system chops. > > Ericsson TAC provided a software patch that "AND" ed tone and carrier > squelch so that once tone was detected it could drop and as long as > carrier > squelch was open the repeater would remain open. This patch cured the > problem, except on the Phoenix voting receivers. > > I also find that Kenwood, TKR720's and 750's are much more tolerant of > crappy signals. > > While on my soap box, The Texas VHF FM Society, coordinator for repeaters > in > Texas recommends a maximum instantaneous peak transmitter deviation of +/- > 4.0 Khz. Proper mic input gain and peak deviation limiting goes a long > way > toward helping choppy signals. > > Mic Gain and Transmitter deviation are loosely related that in setting up > a > transmitter, turn the mic gain to max, and set the deviation limiter to > say > 4.0 Khz. Then reduce the mic gain to taste. Helper used to produce an > instrument to measure mic gain, called modulation density - never did > catch > on. > > Anyhow, my two cents. Best 73 and Merry Christmas to all, > > Steve > NU5D > > > -Original Message- > From: Jeff Otterson [mailto:[EMAIL PROTECTED] > Sent: Friday, December 24, 2004 3:22 PM > To: Repeater-Builder@yahoogroups.com > Subject: Re: [Repeater-Builder] Help: GE M2 PL decode dropout on voice > peaks > and IDA control shelf > > > Most likely, your HT is part or all of the problem. > > [Steve Bosshard (NU5D)] > > > > > > > > > Yahoo! Groups Links > > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] COMPLETE VHF/UHF/ELINK/APRS System FOR SALE with Tower and Extra Equipt
FOR SALE 2 Ge Master II Continuous Duty Repeaters (COMPLETE) Currently in operation in Lampasas TX ALL FOR $5000.00 NOTE: All Systems are Currently in Operation. System will need to be disassembled after sold. Shipping is not available (Local Pick-Up).. 2 Repeater Cases (UHF Outside Cabinet) / (VHF Inside Cabinet) 1 Link COM RLC4 Repeater Controller (Controls UHF/VHF/Link/Echolink) Fully Configurable for linking repeaters, Voice Announcements, Voice Recorder and Tons for Extras see the following site: http://www.link-comm.com/rlc4.html Comspec repeater controller (Backup Controller for VHF/UHF) 2 UHF Repeater Ant (UHF DB213 16 Bay and UHF DB213 8 Bay) 1 VHF Repeater Ant (VHF Comet GP6) 6 Element Vert Bean for VHF Link Radio 10 Element UHF Vert Beam for UHF Link Radio 60 Foot Galvanized fold over crank up tower 2 transmitters (75Watt 444.875 UHF) / (110 Watt 145.330 VHF) 2 Power Supplies (UHF/VHF) 2@ Tone Boards (Switchable) (UHF/VHF) 2@ Duplexers (UHF/VHF) 2@ Repeater Receiver Preamps (HamTronics) (UHF/VHF) Misc GE UHF/VHF PA Amp for repeater Ge Phoenix Backup VHF repeater 145.330 Ge Phoenix VHF Link Radio (25 Watts) Ge Phoenix UHF Link Radio (25 Watts) (Spare) Kenwood 2 Meter for APRS 2@ KPC3 TNC (1 Working and 1 Working Backup) for APRS DIGI Laptop (Toshiba with CD and Floppy) Repeater Programming and APRS Docking Station for laptop w/ HDD, CD, Speakers Echolink VoiceOverIP Board WB2REM Board http://www.ilinkboards.com/echolink.html 5 GE Mobiles (Mixed Vhf/HF/UHF) 7 GE MVP (VHF) 5 GE Phoenix VHF/UHF Mixed Manuals and documents ALL FOR $5000.00 For more information plese call me: Tommie 254-458-8112 --- Tommie TaylorLampasas Skywarn Weather Repeater / EchoLink Coordinator for CTSSG---YAHOO: http://groups.yahoo.com/CenTexStormSpottersLIVE VIDEO CAM: http://ctsslampasas.org/myweather/mainpage.htmlWEBPAGE: http://ctsslampasas.org ---CTSSG Weekly Training Net on Thursday @ 7PM Lampasas Repeater 145.330 - tone 162.2, Temple Repeater 146.720 - tone 88.5EchoLink KC5YVU-R Node #28821ICQ for Non_Hams 166128088 ---A1 Custom MugsWEBPAGE: http://a1cmugs.com Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.