are you using pin # 10 of J3 ??use pin # 5 of J4, this
will
give plenty of detected flat audio.
Juan, 73 de XE2SI
- Original Message -
From:
Mark
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 18, 2005 8:42
AM
Subject: [Repeater-Builder] CTCSS Decode
Problems/Questions
I'm trying to use a TS-64 with a Motorola R100 and am having
troublewith decode. Connecting the TS-64 input to either a flat
audio ordetector audio point does not seem to have enough volume to drive
thedecoder reliably. The R100 levels are set correctly.Is there
some other place I should be tapping into? or is there anexternal circuit
I should construct to boost the input into
thedecoder?TIA,Mark.Yahoo!
Groups Links* To visit your group on the web, go
to: http://groups.yahoo.com/group/Repeater-Builder/*
To unsubscribe from this group, send an email to: [EMAIL PROTECTED]*
Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.