Re: [Repeater-Builder] GE Mastr Pro

2010-07-13 Thread JOHN MACKEY 
They usually tune up fine.  I have taken several of the 90 watt transmitter
strips and receiver down to 146 Mhz with little or no problem.  Occasionally
the coupling with the final has to be slightly fiddled with to get a better
match.

-- Original Message --
Received: Tue, 13 Jul 2010 11:32:06 AM PDT
From: "Todd" 
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] GE Mastr Pro

> Does anyone have any info on moving a GE Mastr Pro repeater from VHF
commercial to VHF Amateur?  I am curious whether anyone has done it, would it
be worth it before I end up parting them out for scrap.  I also have about a
dozen of the Mastr mobile of the era as well.
> 
> Todd AE7V
> 
>

[Repeater-Builder] GE Mastr Pro

2010-07-13 Thread Todd 
Does anyone have any info on moving a GE Mastr Pro repeater from VHF commercial 
to VHF Amateur?  I am curious whether anyone has done it, would it be worth it 
before I end up parting them out for scrap.  I also have about a dozen of the 
Mastr mobile of the era as well.

Todd AE7V

[Repeater-Builder] GE Mastr PRO deskmate power supply question.

2005-04-20 Thread Dennis Adams 


Greetings,

I have a GE Mastr Pro Deskmate with the 4EP38A10 Power Supply. The 
question I have... are the barrier strips at the top the same pinouts 
for the TX/RX strips as the 4EP38A12 power supply? I have the 4EP38A12 
Schematic.

I am wanting to hookup a controller and wanted to make sure I have the 
COS, audio, PTT, etc correct for wiring. 

Better yet if someone has a schematic for this unit that would also 
detail the barrier strip designations, please contatct me. I will pay 
for a schematic of this power supply.

Thanks,
Dennis / KB8YGC







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] GE Mastr pro deskmate

2005-01-21 Thread Neil McKie 


  Best thig to do when requesting information as you are is to 
 determine all the model numbers on the cabinet then the model 
 numbers on each chassis you are planning to use etc. 

  Numbers such as ER42 ... or ET58 ... and include all the 
 letters/digits too. 

  Just making a general request about a Mastr-Pro like trying to 
 order a water pump from an auto parts place without telling them 
 what year / model of the vehicle. 

  Neil - WA6KLA


Dennis Adams wrote:
> 
> Greetings,
> 
> Anyone know where I can find a service manual for this repeater? I
> am also looking for TX/RX strips for UHF operation. Can anyone point
> me in the right direction?
> 
> Thanks in advance,
> Dennis, KB8YGC
> 
> 
> Yahoo! Groups Links
> 
> 
> 
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Repeater-Builder] GE Mastr pro deskmate

2005-01-21 Thread Dennis Adams 



Greetings,

Anyone know where I can find a service manual for this repeater? I 
am also looking for TX/RX strips for UHF operation. Can anyone point 
me in the right direction?

Thanks in advance,
Dennis, KB8YGC










 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/