Re: [Repeater-Builder] Kenwood TK-840-1
It reads the radio fine. I went to test mode. All it did was reset the software. What im I doing wrong 718-999-1436 [EMAIL PROTECTED] 11/12/03 06:08PM If you have the Software, : 1 Read the radio 2 Go to test mode 3 Press F10 4 Go to Maximum deviation 5 Adjust as necesary. If you only want to adjust the microphone sens. you only have to open the radio top and botom, take the front apart, in the components side will be a variable resistor just above the mic. conector , this is the microphone sensibility control hope this helps Juan Richard Velez wrote: Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Kenwood TK-840-1
Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Kenwood TK-840-1
Richard, it's through the software or via the front panel but ONLY if the radio is programmed to allow you to get into this mode on power up.. Good Luck, Pete Richard Velez wrote: Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Kenwood TK-840-1
I have the software. Were on the menu controls this setting [EMAIL PROTECTED] 11/12/03 05:33PM Richard, it's through the software or via the front panel but ONLY if the radio is programmed to allow you to get into this mode on power up.. Good Luck, Pete Richard Velez wrote: Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Kenwood TK-840-1
There should be a TEST option under the Program pull down.. -Pete Richard Velez wrote: I have the software. Were on the menu controls this setting [EMAIL PROTECTED] 11/12/03 05:33PM Richard, it's through the software or via the front panel but ONLY if the radio is programmed to allow you to get into this mode on power up.. Good Luck, Pete Richard Velez wrote: Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Kenwood TK-840-1
If you have the Software, : 1 Read the radio 2 Go to test mode 3Press F10 4 Go to Maximum deviation 5 Adjust as necesary. If you only want to adjust the microphone sens. you only have to open the radio top and botom, take the front apart, in the components side will be a variable resistor just above the mic. conector , this is the microphone sensibility control hope this helps Juan Richard Velez wrote: Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Kenwood TK-840-1
I went into test no options for mic audio is shown. [EMAIL PROTECTED] 11/12/03 05:50PM There should be a TEST option under the Program pull down.. -Pete Richard Velez wrote: I have the software. Were on the menu controls this setting [EMAIL PROTECTED] 11/12/03 05:33PM Richard, it's through the software or via the front panel but ONLY if the radio is programmed to allow you to get into this mode on power up.. Good Luck, Pete Richard Velez wrote: Does anyone know how to increase the mic audio on this radio?? Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
