[Repeater-Builder] Kenwood TKR-830

[KD4PBC]

 I have a TKR 830 UHF Kenwood Repeater Excellent shape.

This is the model before the TKR 840 factory says it has the same 

same specifications as the TKR840 except does not do NRZ paging 

and the inputs/outputs are fixed. 

$750.00 shipped to your door (lower 48 only) elsewhere email for shipping 

Robert Mitchell

[Repeater-Builder] Kenwood TKR-830

[Mark A. Tomany]

Well, a couple of months ago, I posted that I was looking to purchase an
Icom IC-FR4000 to replace an ailing MSR2000 that I “administer” for the
local hams.

After long last, I was told by the vendor that Icom is not currently making
the “-2” model (ham split) and probably will not begin any production in the
near future.  The best they could offer was “Icom says it may start
production in the second quarter of 2005”…  May is the operational word
here.

To keep this long story as short as possible, the “repeater fairy” paid me
an early Christmas visit today, and delivered a Kenwood TKR-830.  I haven’t
had any opportunity to check what freq it was on, but the courier stated it
was in operation until taken off the air.

An attempt to find anything about this animal on Kenwood’s website was
futile, so I ask (hoping for many kind assists from the list):
1)   Does anyone have a manual scanned in for this machine?  If so, can I
trouble you for a copy?  (I do have broadband, or will send a blank disk)
2)   Is the programming software available for any source – even if it’s
Kenwood?  (If so, can I get a product ID # to order it?)
3)   Can I assume this machine is fairly easily tuned down into the ham
band?
4)   Is there anything I need to watch out for regarding this machine?

Thanks to everyone – you’ve all been a big help in the past.

Mark – N9WYS






 
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/

* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]

* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
 

Re: [Repeater-Builder] Kenwood TKR-830

[XE2SI]

Hi Mark:

The softwareI have,n canmail it to you, do not 
have the service manual; but from 
Kenwood advice it can not be programed below 450 Mhz, if 
anybody has done
something to override the band limit will be very nice to 
contact him
Juan

  - Original Message - 
  From: 
  Mark A. 
  Tomany 
  To: Repeater-Builder 
  Sent: Monday, December 13, 2004 3:26 
  PM
  Subject: [Repeater-Builder] Kenwood 
  TKR-830
  Well, a couple of months ago, I posted that I was looking 
  to purchase anIcom IC-FR4000 to replace an ailing MSR2000 that I 
  "administer" for thelocal hams.After long last, I was told by the 
  vendor that Icom is not currently makingthe "-2" model (ham split) and 
  probably will not begin any production in thenear future. The best 
  they could offer was "Icom says it may startproduction in the second 
  quarter of 2005". May is the operational wordhere.To keep 
  this long story as short as possible, the "repeater fairy" paid mean early 
  Christmas visit today, and delivered a Kenwood TKR-830. I haven'thad 
  any opportunity to check what freq it was on, but the courier stated itwas 
  in operation until taken off the air.An attempt to find anything about 
  this animal on Kenwood's website wasfutile, so I ask (hoping for many kind 
  assists from the list):1) Does anyone have a manual scanned in 
  for this machine? If so, can Itrouble you for a copy? (I do 
  have broadband, or will send a blank 
  disk)2) Is the programming software 
  available for any source - even if it'sKenwood? (If so, can I get a 
  product ID # to order it?)3) Can I 
  assume this machine is fairly easily tuned down into the 
  hamband?4) Is there anything I 
  need to watch out for regarding this machine?Thanks to everyone - 
  you've all been a big help in the past.Mark - 
  N9WYSYahoo! Groups 
  Links* To visit your group on the web, go 
  to: http://groups.yahoo.com/group/Repeater-Builder/* 
  To unsubscribe from this group, send an email to: [EMAIL PROTECTED]* 
  Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/













Yahoo! Groups Links

To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.