1. If the transmit frequency is also off by 4 kHz, then you should adjust the
14.4 MHz oscillator via the hole in the front or top of the RF tray.
2. If it's just the receiver, I would suspect the 2nd oscillator crystal, but
it's not adjustable.
3. Could be a dirty connector between the Uniboard and interconnect board in
the RF tray, or between the control tray and interconnect board.
4. I'd suspect your measuring equipment and try some other stuff before
tweaking the MSF.
Bob M.
==
--- On Sun, 7/6/08, garyp609 [EMAIL PROTECTED] wrote:
From: garyp609 [EMAIL PROTECTED]
Subject: [Repeater-Builder] MSF5000 UHF Analog Receive Adjustment
To: Repeater-Builder@yahoogroups.com
Date: Sunday, July 6, 2008, 6:07 PM
My MSF5000 RX has drifted about 4khz up. Is there an easy
way to adjust
it back down to the desired RX frequency?
Thanks 73's
Gary K2ACY
