Re: [Repeater-Builder] Micor Amp TLE1713A
The Motorola TLE1713A Power Amplifier is rated at 75 watts continuous duty for 450-470 MHz. It is a component of the MICOR C64RCB station. All of the technical data is in Service Manual 6881025E50. 73, Eric Lemmon WB6FLY Joe Peterson wrote: > > What is the out put of the Micor TLE1713A ?? > > - Original Message - > From: "Kevin Berlen" <[EMAIL PROTECTED]> > To: > Sent: Saturday, November 08, 2003 5:33 PM > Subject: Re: [Repeater-Builder] Micor Amp TLE1713A > > > Approximately 2 watts will drive this amp to full output. The yellow lead > > is the control > > voltage input. Good luck with your project and 73, > > > > Kevin, K9HX > > > > At 10:18 PM 11/8/2003 +, you wrote: > > >I plan on Using A Micor TLE1713A Amp temporally driving it with a > > >Maxtrac, What is the Max Wattage input to this Amp for Full > > >Output, I will be using the Micor Pwr supply so I will have the > > >9Volt control Voltage , Is this How You control the output of the amp > > >RF Out ? > > > > > > > > > Thanks Don KA9QJG > > > > > > > > > > > > > > > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Micor Amp TLE1713A
What is the out put of the Micor TLE1713A ?? The amp is rated for 75 watts continous duty, once it passes thru the stations built in single stage circulator. They can be difficult and expensive to repair though, so most people run them at 50 to 60 watts output. On the bench, I have seen well over 100 watts out of one of these amps with the control voltage lead connected back to the A+ supply - something that should not be done other than for short periods during bench testing. Kevin, K9HX Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Micor Amp TLE1713A
What is the out put of the Micor TLE1713A ?? - Original Message - From: "Kevin Berlen" <[EMAIL PROTECTED]> To: Sent: Saturday, November 08, 2003 5:33 PM Subject: Re: [Repeater-Builder] Micor Amp TLE1713A > Approximately 2 watts will drive this amp to full output. The yellow lead > is the control > voltage input. Good luck with your project and 73, > > Kevin, K9HX > > At 10:18 PM 11/8/2003 +, you wrote: > >I plan on Using A Micor TLE1713A Amp temporally driving it with a > >Maxtrac, What is the Max Wattage input to this Amp for Full > >Output, I will be using the Micor Pwr supply so I will have the > >9Volt control Voltage , Is this How You control the output of the amp > >RF Out ? > > > > > > Thanks Don KA9QJG > > > > > > > > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Micor Amp TLE1713A
Approximately 2 watts will drive this amp to full output. The yellow lead is the control voltage input. Good luck with your project and 73, Kevin, K9HX At 10:18 PM 11/8/2003 +, you wrote: >I plan on Using A Micor TLE1713A Amp temporally driving it with a >Maxtrac, What is the Max Wattage input to this Amp for Full >Output, I will be using the Micor Pwr supply so I will have the >9Volt control Voltage , Is this How You control the output of the amp >RF Out ? > > > Thanks Don KA9QJG > > > > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[Repeater-Builder] Micor Amp TLE1713A
I plan on Using A Micor TLE1713A Amp temporally driving it with a Maxtrac, What is the Max Wattage input to this Amp for Full Output, I will be using the Micor Pwr supply so I will have the 9Volt control Voltage , Is this How You control the output of the amp RF Out ? Thanks Don KA9QJG Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/